Lounge Chairs - Knoll

pattern no. pvc edge veneer edge (add V after 4th digit) marble top
47TS15-(1, AP)-(GC, GE, GB) $10,917.
47TS15-(1, AP)-(NGC, NGE) 9,167.
47TS15-(1, AP)-( )-( ) 3,742. 4,365.
47TS15-(1, AP)-( ) 4,208. 5,142.
47TS20-(1, AP)-(GC, GE, GB) 11,033.
47TS20-(1, AP)-(NGC, NGE) 9,282.
47TS20-(1, AP)-( )-( ) 3,742. 4,208.
47TS20-(1, AP)-( ) 4,365. 5,142.
47TS31-(1, AP)-( )-( ) 5,765. 7,170.
47TS31-(1, AP)-( ) 7,014. 8,572.
47TS48-(1, AP)-( )-( ) 10,239. 12,156.
47TS48-(1, AP)-( ) 13,403. 15,119.
47TS64-(1, AP)-( )-( ) 11,776. 14,821.
47TS64-(1, AP)-( ) 16,676. 18,702.
Construction
Combining tables:
If individual tables are purchased with
the intent of placing them contiguously,
they should be quoted for flitch or book
match. When desired specifically for
combination, note that information on the
order so that bullnose edges and legs at
each table junction are removable.
Leveling strip slides into slots at edges.
Legs connect into inserts that span tops.
Bullnose edges store for future retrieval
and separation.
Standard size tables:
For additional standard size tables
please consult your KnollStudio
representative, dealer or Customer
Service associate.
Special width tables:
For standard depth tables (42 3 /4�,481 /2�,
and 60 1 /4�), you may determine list
pricing on any special width between two
standard sizes simply by identifying the
next higher standard width tables, and
add 5% to the standard list price.
For example, if requesting an 80�wx
42 3 /4�d table, you would identify the next
wider table (84�wx423 /4�d) and add 5%
to the list price of that standard size.
Consult a KnollStudio representative for
special Order Code.
Special sizes and finishes:
For all other sizes and for special
finishes, consult your KnollStudio
representative, dealer, or Customer
Services for information.
Legs:
Extruded aluminum leg in black epoxy or
polished aluminum finish. Multiple
sectioned tables have two legs bridging
each section, plus two legs at each end.
Marble top:
13/16� thick marble coated with
transparent polyester to help eliminate
use-associated stains.
215
Laminate and wood tops:
Tops are 1 1 /8� thick. Wood tops are
cross-veneered. Tops available with
black semi-gloss extruded PVC-T mold
bullnose edge or stained solid wood
bullnose edge. For PVC-T bullnose,
short ends of rectangular table have a
wood bullnose with a black semi-gloss
paint to match the PVC-T edges.
Glides:
Adjustable nylon, black epoxy finish.
Shipping:
Top and base shipped in separate pieces;
assembly required.
To assemble:
Legs connect into predrilled inserts
using mounting hardware (included).
Bullnose edge detail:
KnollStudio