Lounge Chairs - Knoll

Designer(s):
Eero Saarinen, 1950
Order Code
Example: 71A-3-T5G-R-ES8080
71A Open back arm chair
3 Black top caps
T5G Advanced height
adjustment, swivel/tilt
R Soft wheel casters
ES8080 Espana, Serpentina
Note:
The Saarinen executive chairs are part of
a collection. Please refer to Saarinen side
chairs, lounge chairs and tables on
beginning on pages 144 and 238.
Specify:
1. Pattern number
2. Black top cap option (swivel base
only)
3. Caster type (swivel base only)
4. Cal 133 fire code option
5. Split upholstery option (add S)
6. Textile selection
Eero Saarinen
Executive Arm Chairs
description
71A-T5G-H Executive arm chair with
pneumatic seat height adjustment
Executive arm chair with pneumatic seat
height adjustment, contrast leather welt
option
71A-C Executive arm chair with tubular legs
and glides
Executive arm chair with tubular legs and
glides, contrast leather welt option
71A-W Executive arm chair with wood legs
and glides
Executive arm chair with wood legs and
glides, contrast leather welt option
R Optional soft wheel casters (change -H to
-R)
3 Optional black top caps (add -3 after 71A,
not available for 71A-PC)
Ordering Information
Leg Finishes:
Ebonized Walnut (suffix D)
Light Oak (suffix LO)
Light Walnut (suffix LWA)
Pearwood (suffix P)
Polished Chrome (suffix C)
Reff Dark Cherry (suffix V314)
Caster option:
Hard wheel casters standard. For soft
wheel casters, change -H in pattern
number to -R. No glide option on swivel
models.
Split upholstery option:
The seat and back of the Saarinen
Executive Chair can be specified in split
upholstery. Indicate S before selected
seat upholstery, followed by selected
back upholstery. The price equals the
price of the higher upholstery grade.
COM split fabric requirements:
Back upholstery: 2.25 yards
Seat upholstery: 1.25 yards
COL split leather requirements:
Back upholstery: 40 square feet
Seat upholstery: 23 square feet
seat h,
min
seat h,
max w d h, min h, max
textile
fabric
yds.
req.
leather
sq. ft. weight type
16 1 /2� 21 3 /4� 26� 24 1 /4� 31� 36 1 /4� 2.9 47 34 lbs.
16 1 /2� 21 3 /4� 26� 24 1 /4� 31� 36 1 /4� 2.9 47 34 lbs. uphol.
6.25 welt
18� 26� 25 1 /2� 31 1 /2� 2.9 47 19 lbs.
18� 26� 26� 31 1 /2� 2.9 47 19 lbs. uphol.
6.25 welt
18� 26� 24 1 /2� 31 1 /2� 2.9 47 18 lbs.
18� 26� 24 1 /2� 31 1 /2� 2.9 47 18 lbs. uphol.
146
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
Cal 133 Fire Codef:
The Saarinen Executive chair complies
with California Technical Bulletin 133 in
selected upholstery. Specify suffix -C at
end of pattern number. Upcharge
applies, see page 18.
Maintenance:
See pages 27-28.
Note:
The Saarinen Executive Arm Chair is
Greenguard certified.
6.25 welt
Construction
Frame:
Molded reinforced polyurethane shell.
Contoured plywood seat form.
Upholstery:
Urethane foam cushion. Welt detail along
arm, back and top of seat is available as
a self welt (same material) or as a
contrasting leather welt. Please specify
pattern number with LT suffix, for
contrasting welt, and add appropriate
leather upcharge for total list price of the
piece. Leather welt option is available
on both textile and leather upholstery.
Swivel base:
Five-star steel base in protective black
epoxy finish. Stainless steel or optional
black epoxy top caps.
Steel leg base:
Four legs in seamless tubular steel with
polished chrome finish.