Lounge Chairs - Knoll

Designer(s):
Charles Pollock, 1963
Order Code
Example: 12A-1-D5G-H-AM3030
12A Pollock arm chair
1 Polished aluminum
frame/stainless steel base
top caps
D5G Swivel/tilt control with
pneumatic seat height
adjustment
H Hard-wheel casters
AM3030 Amazon, Bossa Nova
Specify:
1. Pattern number
2. Frame/base top cap finish
3. Cal 133 Fire Code option
4. Textile selection
Charles Pollock
Executive Conference Arm and Armless Chairs
description seat h arm h w d h
12A-(1, 2, 3 or 4)-D5G-H Arm chair,
swivel/tilt, pneumatic height, seat height
adjustment
12C-(1, 2, 3 or 4)-D5G-H Armless chair,
swivel/tilt, pneumatic height, seat height
adjustment
textile
fabric
yds.
req.
leather
sq. ft. weight
18�-25� 24�-30� 26 1 /4� 28 1 /4� 31�-36� 1.1 20 44 lbs.
44 lbs.
18�-25� 23 1 /2� 28 1 /4� 31�-36� 1.1 20 41 lbs.
1250COVER Replacement cover
R Optional casters for hard floors (substitute
-R for -H in pattern number)
1250BUTTON Replacement buttons
(specify upholstery)
1.1 20
Ordering Information
Frame/base top cap finishes:
Polished aluminum/stainless steel
(suffix 1)
Satin anodized aluminum/brushed
stainless steel (suffix 2)
Black anodized aluminum/black epoxy
(suffix 3)
Black anodized aluminum/stainless steel
(suffix 4)
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
Maintenance:
See pages 27-28.
Cal 133 Fire Codef:
The Pollock chair complies with
California Technical Bulletin 133 in
selected upholstery. Specify suffix -C at
end of pattern number and suffix -133 at
end of upholstery selection. Upcharge
applies, see page 18.
Note:
The Pollock Executive Conference Arm
and Armless Chair is Greenguard
certified.
128
Construction
Outer shell:
Integrally colored, black textured
polypropylene.
Frame:
Extruded aluminum with polished, satin
or black anodized finish. Steel support
plate spans the width of the seat cushion.
Upholstery:
Multi-density urethane foam (4 1 /2�
maximum thickness); button tufting on
fabric and leather detail. Replacement
upholstery can be field installed.
Arms:
Seamless, black phenolic plastic.
Column cover:
Polypropylene on pneumatic seat height
models; steel with epoxy finish on
mechanical seat height models.
Base:
Steel armature with epoxy finish;
polished stainless or black epoxy
finished top caps. Standard five-star
design.
Standard casters:
Hard wheel casters standard.
41 lbs.
Controls:
360° swivel; tilt with tilt tension and
pneumatic seat height adjustment.
Replacement buttons:
Set of 6 buttons for one chair.
Replacement cover:
Must be installed by an upholsterer.