Optical Read-out Head - exakm.gr

Optical Read-out HeadCan be connected to computeror MULTITERM hand-held terminalNo supply requiredComplies with IEC 1107/EN61107Designed for use with MULTITERM,Kamstrup meters and M-Bus masterRobust constructionAplicationThe optical read-out head is used to transmit data fromenergy meters, electricity meters and similar measuringequipment to computers and hand-held terminals via anoptical data port, in accordance with IEC 1107/EN61107.Applications range from single data readings, e.g. foraccounting purposes, to more comprehensive programmingof meters.The optical read-out head is fitted with a permanentmagnet, which ensures that the head remains securelyon the meter during data acquisition. Data is transmittedvia an infrared light. The read-out head has - as dometers - both a transmitter and receiver for serial, twowaycommunication.Kamstrup A/S, Energi DivisionIndustrivej 28, StillingDK-8660 Skanderborgtel: +45 89 93 10 00fax: +45 89 93 10 01

Technical data and principle diagramBaud rate:Max. 2400 bit/sec.Connection control: Echo from TD to RDAmbient temperature: -10°C...+55°CStorage temperature: -20°C...+70°CEnclosure: IP 53Cable length:Approx. 1.5 mDimensions:Dia. 32 x 33 mmWeight:Approx.. 0.1 kgDirections for use & storageThe optical read-out head must not be used or stored inthe vicinity of data disks or computers as the magnetmay damage data. Always cover the magnet with theprotective disc when the read-out head is not in use.The cable from the readouthead must alwayspoint downwards ±20°.5810-0198 GB/00.03/Rev. B1Authorised distributorOptical read-out head with 9F D-sub plug Type No. 66-99-1029M/25F D-sub adapter Type No. 66-99-120