TJA1054 Fault-tolerant CAN transceiver
TJA1054 Fault-tolerant CAN transceiver
TJA1054 Fault-tolerant CAN transceiver
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Philips SemiconductorsProduct specification<strong>Fault</strong>-<strong>tolerant</strong> <strong>CAN</strong> <strong>transceiver</strong><strong>TJA1054</strong>TEST AND APPLICATION INFORMATIONhandbook, full pagewidth+5 VINH BAT V CCSTBEN56<strong>TJA1054</strong>1211<strong>CAN</strong>L<strong>CAN</strong>HC2WAKE7TXD21 14 108RTHR1C120 pFRXD313 4GNDERR9RTLR1C1MGL423Termination resistors R1 (100 Ω) are not connected to pin RTH or pin RTL for testing purposes because the minimum load allowed onthe <strong>CAN</strong> bus lines is 500 Ω per <strong>transceiver</strong>.The capacitive bus load of 10 nF is split into 3 equal capacitors (3.3 nF) to simulate the bus cable.Fig.5 Test circuit for dynamic characteristics.handbook, full pagewidth+12 V+5 V10 µFINH BAT V CC20 pFWAKE7TXD2STBENRXD56312<strong>TJA1054</strong>11913 4GND ERR511 Ω<strong>CAN</strong>L<strong>CAN</strong>H511 ΩRTL125 Ω1 nF1 nF1 nFGENERATOR1 14 108RTH125 Ω1 nFMGL426The waveforms of the applied transients on pins <strong>CAN</strong>H and <strong>CAN</strong>L will be in accordance with ISO 7637 part 1: test pulses 1, 2, 3a and 3b.Fig.6 Test circuit for automotive transients.2001 Nov 20 16