You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ADJUSTING CHEEK PIECE1. With an 5mm hex wrench lossen thecheek piece locking bolt until the cheekpiece can move freely. The locking boltis located on the opposite side of thecheek piece (fig. 25).28Figure 253. Set the cheek piece to your desiredheight (fig. 26) and tighten the lockingbolt on the opposite side. The cheekpiece was designed with locking teethso there is no need to over-tighten thelocking bolt.Figure 26