Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>HIMax</strong>1 <strong>Safety</strong> <strong>Manual</strong>1 <strong>Safety</strong> <strong>Manual</strong>Knowledge of regulations and the proper technical implementation of the safety instructionsdetailed in this manual performed by qualified personnel are prerequisites for safelyplanning, engineering, programming, installing and starting up the <strong>HIMax</strong> automationdevices, as well as for ensuring safety during their operation and maintenance.HIMA will not be held liable for severe personal injuries, damage to property or thesurroundings caused by any of the following: unqualified personnel working on or with thedevices, de-activation or bypassing of safety functions, or failure to <strong>com</strong>ply with theinstructions detailed in this manual (resulting in faults or impaired safety functionality).<strong>HIMax</strong> automation devices have been developed, manufactured and tested in <strong>com</strong>pliancewith the pertinent safety standards and regulations. They may only be used for the intendedapplications under the specified ambient conditions.1.1 Validity and Current VersionVersion Rev.2.0 This revision of the safety manual must be used from Version V2. ofthe <strong>HIMax</strong> System.The most current version of the <strong>Safety</strong> <strong>Manual</strong>, indicated by the highest version number, isapplicable and valid. The most current version is available on the HIMA Homepage .1.2 Objectives of the <strong>Manual</strong>This manual contains information on how to operate the <strong>HIMax</strong> safety-related automationdevice in the intended manner. It provides an introduction to the safety concept of the<strong>HIMax</strong> system and should increase the reader's safety awareness.The <strong>Safety</strong> <strong>Manual</strong> is based upon the contents of the certificate and of the test report forthe certificate.1.3 Target AudienceThis manual addresses system planners, configuration engineers, programmers ofautomation devices and personnel authorized to start up, operate and maintain the devicesand systems. Specialized knowledge of safety-related automation systems is required.1.4 HIMA AddressThis documentation may not be reproduced in any form, in whole or in part, without theexpress written consent of HIMA.All rights reserved. Equipment subject to change without notice.© HIMA Paul Hildebrandt GmbH + Co KGP.O. Box 1261D-68777 Brühl near MannheimTelephone (+49) 06202 709-0Fax (+49) 06202 709-107E-Mail info@hima.<strong>com</strong>Internet http://www.hima.<strong>com</strong>HI 801 003 D Rev.2.0 Page 7 of 70
Change language