HIMax Safety Manual - Tuv-fs.com
HIMax Safety Manual - Tuv-fs.com HIMax Safety Manual - Tuv-fs.com
AppendixHIMaxIndex of FiguresFigure 1: Recommended Configuration: All Processor Modules on Base Plate 0 26Figure 2:Recommended Configuration: Processor Modules on Base Plate 0 and on Base Plate1 27Figure 5: Reaction Time With Interconnection of Two HIMax Controllers 61Figure 6: Reaction Time for Connection between One HIMax and One HIMatrix Controller 61Figure 7: Reaction Time with Remote I/Os 62Figure 8: Reaction Time with Two HIMax Controllers and One HIMatrix PES 62Page 66 of 70HI 801 003 D Rev.2.0
HIMaxAppendixIndex of TablesTable 1: Standards for EMC, Climatic and Environmental Requirements 12Table 2: General requirements 12Table 3: Climatic Requirements 12Table 4: Mechanical Tests 13Table 5: Interference Immunity Tests 13Table 6: Interference Immunity Tests 13Table 7: Noise Emission Tests 13Table 8: Review of the DC Supply Characteristics 14Table 9: Overview System Documentation 15Table 10: Slot Positions Permitted for Processor Modules 23Table 11: Overview of the Input Modules 29Table 12: Overview of the Output Modules 40Table 13: System Parameters of the Resource 49Table 14: Hardware System Variables 49Table 15: System Variables for Locking and Unlocking the PES 52Table 16: System Parameters of the User Program 55Table 17: User Program Switch Freeze Allowed 57HI 801 003 D Rev.2.0 Page 67 of 70
- Page 16 and 17: 3 Safety Concept for Using the PES
- Page 18 and 19: 3 Safety Concept for Using the PES
- Page 20 and 21: 3 Safety Concept for Using the PES
- Page 22 and 23: 3 Safety Concept for Using the PES
- Page 24 and 25: 4 Processor Modules HIMaxNOTESystem
- Page 26 and 27: 5 System Bus Module HIMaxWARNINGPhy
- Page 28 and 29: 6 Communication Module HIMax6 Commu
- Page 30 and 31: 7 Input Modules HIMaxNOTICESystem m
- Page 32 and 33: 7 Input Modules HIMax7.6 Checklists
- Page 34 and 35: 7 Input Modules HIMax7.6.3 Checklis
- Page 36 and 37: 7 Input Modules HIMax7.7 Safety-Rel
- Page 38 and 39: 7 Input Modules HIMax7.8 Checklist
- Page 40 and 41: 8 Output Modules HIMax8 Output Modu
- Page 42 and 43: 8 Output Modules HIMaxIn this state
- Page 44 and 45: 8 Output Modules HIMax8.7 Checklist
- Page 46 and 47: 9 Software HIMax9 SoftwareThe softw
- Page 48 and 49: 9 Software HIMax9.4 Resource Parame
- Page 50 and 51: 9 Software HIMaxExample: A key swit
- Page 52 and 53: 9 Software HIMaxThe user only need
- Page 54 and 55: 10 User program HIMaxSensors (digit
- Page 56 and 57: 10 User program HIMax10.2.5 Downloa
- Page 58 and 59: 10 User program HIMax10.2.10 Checkl
- Page 60 and 61: 11 Configuring Communication HIMaxN
- Page 62 and 63: 11 Configuring Communication HIMaxF
- Page 64 and 65: 11 Configuring Communication HIMaxP
- Page 68: AppendixHIMaxIndexanalog inputsuse
Appendix<strong>HIMax</strong>Index of FiguresFigure 1: Re<strong>com</strong>mended Configuration: All Processor Modules on Base Plate 0 26Figure 2:Re<strong>com</strong>mended Configuration: Processor Modules on Base Plate 0 and on Base Plate1 27Figure 5: Reaction Time With Interconnection of Two <strong>HIMax</strong> Controllers 61Figure 6: Reaction Time for Connection between One <strong>HIMax</strong> and One HIMatrix Controller 61Figure 7: Reaction Time with Remote I/Os 62Figure 8: Reaction Time with Two <strong>HIMax</strong> Controllers and One HIMatrix PES 62Page 66 of 70HI 801 003 D Rev.2.0