HIMax Safety Manual - Tuv-fs.com

2 Intended Use HIMaxStandardEC/EN 61131-2:2006IEC/EN 61000-6-2:2005IEC/EN 61000-6-4:2006Table 1:ContentProgrammable controllers, Part 2Equipment requirements and testsEMCGeneric standards, Parts 6-2Immunity for industrial environmentsElectromagnetic Compatibility (EMC)Generic emission standard, industrial environmentsStandards for EMC, Climatic and Environmental RequirementsWhen using the safety-related HIMax control systems, the following general requirementsmust be met:Requirement type Requirement contentProtection class Protection class II in accordance with IEC/EN 61131-2Pollution Verschmutzungsgrad II nach IEC/EN 61131-2Altitude< 2000 mEnclosure Standard: IP 20If required by the relevant application standards (e.g., EN 60204, EN954-1), the device must be installed in an enclosure of the specifiedprotection class (e.g., IP 54).Table 2: General requirements2.3.1 Climatic RequirementsThe following table lists the key tests and limit values for climatic requirements:IEC/EN 61131-2Table 3:Climatic testsOperating temperature: 0...+60 °C(test limits: -10...+70 °C)Storage temperature: -40...+85 °CDry heat and cold resistance tests:+70 °C / -25 °C, 96 h, power supply not connectedTemperature change, resistance and immunity test:-25 °C / +70 °C und 0 °C / +55 °C,power supply not connectedCyclic damp-heat withstand tests:+25 °C / +55 °C, 95 % relative humidity,power supply not connectedClimatic RequirementsPage 12 of 70HI 801 003 D Rev.2.0