SAM4s SPS-2000 Operators Manual.pdf - Parklandbm.com

4. If the system is programmed to warn the operator if items are held when the check isstored, (See P mode System Options/Tracking File Options #5) the held itemmessage displays. The message will list all checks with held items, so that the serveris reminded of other checks/tables where held items may need to be released.5. Touch CLOSE to store the check.Print All Held Items1. Recall an order with held items. (Flag is set to automatically select held items.)Touch any key except PRINT HOLD (or Repeat) to de-select items if you areproceeding with any other operation.2. Touch PRINT HOLD. (Hold status is removed for selected items; items will be sentto appropriate output when the check is serviced.)Note: This operation has been enhanced at software version 2.00x: items are nowselected when the guest check is recalled (visually with a “S”). When a guest check withHELD items is recalled items can be selected using the ENTER function key. This willadd a “S” in front of the item. When [PRINT HOLD] is pressed, the “S” will beremoved and when the guest check is serviced those items will be released to the KP orKVS. Any item with a “H” will continue to be HELD.Print an Individual Item1. Recall an order with held items. (Option to automatically select held items is set to“No”.)2. Touch the item you wish to print.3. Touch PRINT HOLD. (Hold status is removed for selected item; item will be sentto appropriate output when the check is serviced.)SAM4s SPS-2000 Operator Manual v1.13 Basic Operations • 81