SAM4s SPS-2000 Operators Manual.pdf - Parklandbm.com

Beginning a Check1. Depending on how your system is programming, you can begin a check with either acheck or table:• Enter check number: depending upon programming you may enter the check numberand touch one of the Recall Check functions, i.e. RECALL #1, or touch theRECALL key to automatically assign a check number. (After beginning a checkwith the check number, you may be required to enter a table number, or if table enteris not required, you may optionally enter a table number.)• If Table# is compulsory, if only one check per table is allowed, and if checks areautomatically assigned, you can enter the number of the table and touch TABLE#.The table is opened and the check is automatically assigned.2. If guest entry is required, enter number of guests and touch the GUEST # key.3. Enter the items ordered.4. Touch the appropriate Store Check function, i.e. STORE #1. The message “SERVED”displays momentarily.The check #, table #,guest count andemployee associatedwith the check aredisplayed.SAM4s SPS-2000 Operator Manual v1.13 Basic Operations • 71