SAM4s SPS-2000 Operators Manual.pdf - Parklandbm.com

Basic OperationsSigning On/OffNotes for Clerk Operation• Choose between "Push Button", "Operating Code", "Employee Number” or“Fingerprint” for the employee sign on method. Clerks may also be signed on byMCR. (See "System Option Programming/General Function Options" in theProgram Manual.)• If you choose "Push Button" sign on, use any of the 10 direct employee keys tosign on by directly touching a key. (See "Keyboard Key Location" in theProgram Manual to locate the appropriate functions.) You must also link aspecific employee to each push button key. (To make these links, see "SystemOption Programming/General Function Options" in the Program Manual.)• If you choose "Secret Code" sign on, use the EMPLOYEE key to sign on bycode entry. (See "Keyboard Key Location" in the Program Manual to locate theappropriate function.) You must also program an operating code for eachemployee. (See "Employee Programming" in the Program Manual.)• If you choose "Employee Number" sign on, use the EMPLOYEE key to sign onby employee number entry. (See "Keyboard Key Location" in the ProgramManual to locate the appropriate function.) The employee number is thesequential number (i.e. 1-10) for each employee in the employee file.• Fingerprint sign-on requires an optional DIGENT IZZEX FD 1000 Fingerprintidentification device. Each employee fingerprint must be recorded in programmode. (Available in version 2.00s or later.)• Employee operation can be stay down or pop up. (See "System OptionProgramming/General Function Options" in the Program Manual.)SAM4s SPS-2000 Operator Manual v1.13 Basic Operations • 33