SAM4s SPS-2000 Operators Manual.pdf - Parklandbm.com

MEMORY FULLMemory is full.NEGATIVEThis sale has gone negative. Negative sales are programmed as not allowed.NO CHECK #This message appears when the system cannot find this guest check number.NO DATAPLU can not be found (does not appear in Register Mode). Usually associated with stock entry on an IRCsystem when the PLU exists in one terminal but not another. On the terminal where the PLU does notexist the message not found will appear.NO DRAWER!The employee currently signed on is not assigned to a drawer, and is not allowed to perform cash sales, orthe drawer is no longer attached and is required in order to continue.NO MANUAL ENTRYManual entry is not allowed (scale function).NO PAPERSlip printer is out of paper, appears when printing to a loose-leaf printer.NO PLU!The number entered is not a valid PLU. This message will also appear if a PLU number “built” usingmodifier keys recalls an invalid PLU number.NONADD# REQUIREDThis operation requires the entry of a Non-Add number to fulfill the compulsory requirements.NOT DISCOUNTABLEThe preceding entry is not discountable, product is not available for discounting.NOT PROGRAMMED!This key has not been programmedNOT READY!Remote printer is not ready for printing tasks.NOT ZERODisplayed when trying to delete a PLU that still has sales counts and stock amounts. The PLU mustfirst be reset and cleared from all Z Mode reports.OFF LINE!IRC communications have gone off line.OPEN DRAWERThe register has been programmed not to operate with the cash drawer open.SAM4s SPS-2000 Operator Manual v1.13 Getting Started • 29