SAM4s SPS-2000 Operators Manual.pdf - Parklandbm.com

ENTER EMPLOYEE CODEThe employee is required to sign on before performing a task.ENTER GUEST COUNTThe operator must enter the number of guests when opening a guest check, or beginning a sale.ENTER SEAT#Seat # entry required before operation can continue.ENTER TABLE#Table number entry is required to open a guest check, or begin sale.ENTRY REQUIREDThe function selected from the WLU requires a numeric entry, i.e. a percentage for an open percentdiscount.ERRORGeneral error message.ERROR JAMReceipt / journal printer jammed message.GALLON AMOUNT REQUIREDThis entry involves a gallonage PLU, and requires an amount entry.HALO OVER!The amount entered exceeds the programmed HALO i.e. the task exceeds the maximum amount allowed.ILLEGAL KEY SEQUENCEThe operator has used an illegal key sequence.IN USE!This guest check or clerk number is already open elsewhere in the system. This is also applicable whenthe floating clerk system is activated and the operator is in use on another terminal.INACTIVE!The key touched is inactive. This message also appears if VOID Mode has been disabled.INPUT QTYQuantity input is required for a condiment WLUKITCHEN PRINTER FAILUREThe kitchen printer has failed to respond. Printing has been re-routed to the designated back-up printer isprogrammed.MANAGER OVERRIDE REQUIREDThe manager password must be input in order to override a HALO amount, or other restriction.MANAGER REQUIREDThe manager password must be input to complete this operation.28 • Getting Started SAM4s SPS-2000 Operator Manual v1.13