SAM4s SPS-2000 Operators Manual.pdf - Parklandbm.com

Screen SaverA screen saver can be implemented; your authorized dealer can install a custom graphicimage to display. Depending upon the setting, the screen saver will display after 1 to 99minutes of inactivity.When the screen saver is activated, simply touch the screen to restore the normal display.Initialize/Re-bootThe initialize function allows you to exit any register activity and return to a beginning orcleared state. Any transaction that is in progress will be exited and totals for that transactionwill not be updated.Here are some reasons you may want to initialize your ECR:• The register is in an unknown state, and you wish to exit the current program ortransaction without following normal procedures.• You have performed a function that includes a compulsory activity, such asvalidating or printing, and you wish to bypass the compulsory activity.• An initial clear may be necessary as part of servicing, or troubleshooting an SPS-2000 register or system.Perform this procedure only as necessary. Contact your authorized SAM4S dealer first if youhave questions about operating or programming your SPS-2000.To Initialize the SPS-2000, turn the main power switch off, then on again. The SPS-2000will be ready for operation about 30 seconds after re-booting.Warning: If you initialize while a transaction is in progress, the transaction will beaborted and totals/counters will not be updated.SAM4s SPS-2000 Operator Manual v1.13 Getting Started • 17