seat harness - Mamas & Papas
seat harness - Mamas & Papas seat harness - Mamas & Papas
12Place the seat harness onto the seat as shown in the diagram.3Pass the bottom straps under the seat of the chair. Push the buckles together until they lock,then pull the ends of the webbing straps until tight.4Pass the back straps around the backrest of the chair. Slot the straps through the webbingloops on the back of the seat harness. Check that the loops selected offers the securest fitfor the chair. Push the buckles together until they lock. Pull the ends of the webbing strapsuntil tight.5Place the child on the seat as shown in the diagram. Lift the front of the seat harnessupwards between the child’s legs.Pass the back straps around the backrest of the chair. Slot the straps through the webbingloops on the back of the seat harness. Check that the loops selected offers the securest fitfor the chair. Push the buckles together until they lock. Pull the ends of the webbing strapsuntil the harness is snuggly fitted around the child.Removing the fabric seat harness.Push the tabs on the front flap buckles inwards, then slide the two sections of the buckleapart. The child can now be removed. Repeat for the two remaining buckle to fully removethe seat harness.Seat harness.indd 4-5 15/4/10 15:36:42
12Place the <strong>seat</strong> <strong>harness</strong> onto the <strong>seat</strong> as shown in the diagram.3Pass the bottom straps under the <strong>seat</strong> of the chair. Push the buckles together until they lock,then pull the ends of the webbing straps until tight.4Pass the back straps around the backrest of the chair. Slot the straps through the webbingloops on the back of the <strong>seat</strong> <strong>harness</strong>. Check that the loops selected offers the securest fitfor the chair. Push the buckles together until they lock. Pull the ends of the webbing strapsuntil tight.5Place the child on the <strong>seat</strong> as shown in the diagram. Lift the front of the <strong>seat</strong> <strong>harness</strong>upwards between the child’s legs.Pass the back straps around the backrest of the chair. Slot the straps through the webbingloops on the back of the <strong>seat</strong> <strong>harness</strong>. Check that the loops selected offers the securest fitfor the chair. Push the buckles together until they lock. Pull the ends of the webbing strapsuntil the <strong>harness</strong> is snuggly fitted around the child.Removing the fabric <strong>seat</strong> <strong>harness</strong>.Push the tabs on the front flap buckles inwards, then slide the two sections of the buckleapart. The child can now be removed. Repeat for the two remaining buckle to fully removethe <strong>seat</strong> <strong>harness</strong>.Seat <strong>harness</strong>.indd 4-5 15/4/10 15:36:42
Change language