Glenair Mighty Mouse Connectors Catalog - Interstate Connecting ...

ShieldedContactsAI85014Twinax Socket ContactAssembly InstructionsSocket Contact100 Ohm Parallel CableSTEP 1B1. Strip cable to dimensions shown.Be careful not to flare braid open.2. Pre-tin conductor and braid shield.3. Clean the solder joint with alcohol.Cable Shield.280(7.11).170 (4.32)DielectricConductors.085 (2.16)STEP 21. Insert cable into socket contact.Make sure center conductorlines up to the center socket.STEP 31. Install center conductors until theybottom-out in the contact cavity.Inspect to ensure cable shield is visiblethrough the inspection hole.2. Apply flux and solder through theinspection hole; remove residuesand contamination with alcohol aftersoldering.STEP 41. Install M23053/5-204 or M23053/6-204shrink tubing; cover solder areaand extend insulation by minimumof one wire diameter.Shrink TubingSTEP 51. Illustrates final assembly.© 2012 Glenair, Inc. CAGE Code 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912B-30www.glenair.comE-Mail: sales@glenair.com