Manual IK-CBG-937 - Vaag.es

More documents

Recommendations

Info

Setting channels / clusterEach cluster has a bandwidth which can be programmed from 1 to 7 channels :To set the channel(s) per cluster :In the following example cluster 1 is set for channel 22 to channel 26.- Turn the button to select the Select Filter mode.Select Filter- Push the rotary button to enter the selected mode.Select FilterMode is indicated witha GREEN colored LED.The LED is now RED colored.= green LED= red LED- Inside the mode, turn the button to select the cluster to be set.- Push the button to confirm.I-II III VHF-UHFLED n° 11 2 3 4 5 6 7 8 9 10UHF ClustersSelect FilterThe LED is green.- Turn the button to select the Start Channel mode.Start ChannelThe LED is green.- Push the rotary button to enter the selected mode.Start ChannelThe LED is now RED colored.- Turn the button to select the start channelDisplay- Push the button to confirm.Start ChannelThe LED is green.- Turn the button to select the Stop Channel mode.Stop ChannelThe LED is green.- Push the rotary button to enter the selected mode.Stop ChannelThe LED is now RED colored.- Turn the button to select the stop channelDisplay- Push the button to confirm.Stop ChannelThe LED is green.Repeat this section to set all clusters26
Not<strong>es</strong> :- Single channel mode :When the Start Channel is selected, the Stop Channel is automatically set at the same value.Start Channel- Park function : to switch off the cluster, select Start Channel and set 00.The Stop Channel go<strong>es</strong> automaticaly to 00.Start Channel- If there are overlapping clusters, the display dots will blink alternately.Start Channelcluster 1ch22ch26Cluster 1 = ch 22 to ch 26Cluster 2 = ch 25 to ch 29ch25ch29channelcluster 227
Page 4: BI-II+15V INBIIISAT SlopeSAT ON / O
Page 7 and 8: PROGRAMACION CLUSTERSAjustar cluste
Page 9 and 10: Notas :- Modo MonocanalCuando el ca
Page 11 and 12: AJUSTE DE NIVELLos niveles son ajus
Page 13 and 14: AJUSTE DE NIVELLos niveles son ajus
Page 15 and 16: Para ajustar la ganancia.- Gire el
Page 17 and 18: BI-II+15V INBIIIVHF-UHFSAT SlopeSAT
Page 19 and 20: DIAGRAMA DE BLOQUESAt.20 dBBI-II BI
Page 21 and 22: CBG-937 Ref.2838MULTICHANNEL PROGRA
Page 24 and 25: OPERATIONAll parameters are set wit
Page 28 and 29: To check the channel settings of ea
Page 30 and 31: After automatic level setting proce
Page 32 and 33: SAT OPERATIONSelect the SAT input.-
Page 34 and 35: To switch OFF the SAT amplifier- Tu
Page 36 and 37: BI-II+15V INBI-II+15V INBIIISAT Slo
Page 38 and 39: TECHNICAL SPECIFICATIONSInputsFrequ
Page 40: BI-II+15V INBIIISAT SlopeSAT ON / O
Page 43 and 44: PROGRAMMATION DES FILTRESConfigurer
Page 45 and 46: Remarques :- Mode monocanal :lorsqu
Page 47 and 48: REGLAGE DU NIVEAU TERRESTRELes nive
Page 49 and 50: Réglage de niveau manuelPour régl
Page 51 and 52: Pour régler le gain.Tourner le bou
Page 53 and 54: BI-II+15V INBIII022 kHz18V24V 24V 1
Page 55 and 56: SCHEMA DE PRINCIPEAtt.20 dBBI-FM BI
Page 60: IKUSI - Ángel Iglesias, S.A.Paseo

Manual IK-CBG-937 - Vaag.es

Create successful ePaper yourself

Delete template?

Save as template?