Standard Technical Features of BTG System for Supercritical 660 ...
Standard Technical Features of BTG System for Supercritical 660 ... Standard Technical Features of BTG System for Supercritical 660 ...
Standard Technical Features of BTG System for Supercritical 660/800 MW Thermal Unitsd) The display selection process shall be optimised so that the desireddisplay can be selected with the barest minimum number of keystrokes / steps by the operator.iii)Plant Supervisory, Monitoring and Information Functions of MMIPISThe MMIPIS shall be designed as an on-line system and followingminimum functions shall be performed by MMIPIS:a) Calculations1. Basic calculations: All the algebraic/ logical calculationsrelated to analog points (e.g. sum/ difference/ average/integration etc.), digital point (e.g. AND/ OR/ COMPARE etc.),transformations, flow calculations, time projection or rate ofchange calculations, frequency etc. shall be provided. All thecalculated values of the plant shall be available in the database.2. Performance calculations: The performance calculations shalluse high level language calculations and shall be made usingfloating point arithmetic. The results of these calculations shallbe available through data base for appropriate logs and operatordisplays. The performance calculations shall broadly compriseof plant/equipment efficiency calculations. The calculation shallbe carried out at 30% unit load or higher. The calculationfrequency shall be selectable from 10 minutes to 1 hour, with astep of 10 minutes.3. Other calculations: These shall include variable alarm limitcalculations, heat rate deviations and revenue calculations,frequency excursion time integration etc.b) Alarm monitoring and reportingThe system shall display history of alarms in chronological order ofoccurrence on any of the OWS. The MMIPIS shall have thecapability to store a minimum of 1000 alarms each with pagingfeatures allowing the operator to view any page.c) DisplaysVarious displays on the TFTs shall as a minimum include P&IDdisplays or mimic, bar chart displays, X-Y & X-T plot (trend)displays, operator guidance message displays, group displays, plantstart-up/shutdown message displays, generator capability curves,heat rate deviation displays, system status displays etc.156
Standard Technical Features of BTG System for Supercritical 660/800 MW Thermal UnitsOther types of displays as applicable for convenience of operationshall be provided. However, the minimum quantity of major typesof displays shall be as follows:1. Control displays (group/sub-group/sequence/loop) 5002. P&ID/ mimic display 2003. Bar chart 1004. X-Y/ X-T Plot 1005. Operator guidance message 1006. Plant starting/ shutdown guidance message 1007. Other misc. displays 258. System status & other diagnostic displays on as required basis.The system shall have adequate storage capacity for storing the last72 hours of data at scan rate for a minimum 500 points (operatorselectable) for use in trend displays.d) Logs/ summariesThe system shall generate three basic types of reports/logs i.e., eventactivated, time activated and operator demand log & summaries.The system shall have the facility for viewing of time activated andoperator demand logs/summaries on the TFT(s).1. Event activated logs shall as a minimum include alarm log, tripanalysis log, start-up - shutdown logs (Boiler start-up log,turbine run-up log, turbine shutdown analysis log/ turbine recalllog) & control related logs.2. Time activated logs shall as a minimum include shift log anddaily logs. Each of these shall provide hourly record of aminimum 225 points sub divided into 15 groups.3. Operator demand logs shall include, as a minimum, trend log,maintenance data log, summary log, performance logs andsome selected special logs. The system shall be capable ofgenerating and printing trend log for a minimum of 80 groupsof 15 points each. Maintenance data log shall provide scheduleof preventive maintenance and routine equipments inspection.4. Various summaries shall include off scan summary, constantssummary, point quality summary, substituted values summary,peripheral status summary etc.157
- Page 119 and 120: Standard Technical Features of BTG
- Page 121 and 122: Standard Technical Features of BTG
- Page 123 and 124: Standard Technical Features of BTG
- Page 125 and 126: Standard Technical Features of BTG
- Page 127 and 128: Standard Technical Features of BTG
- Page 129 and 130: Standard Technical Features of BTG
- Page 131 and 132: Standard Technical Features of BTG
- Page 133 and 134: Standard Technical Features of BTG
- Page 135 and 136: Standard Technical Features of BTG
- Page 137 and 138: Standard Technical Features of BTG
- Page 139 and 140: Standard Technical Features of BTG
- Page 141 and 142: Standard Technical Features of BTG
- Page 143 and 144: Standard Technical Features of BTG
- Page 145 and 146: Standard Technical Features of BTG
- Page 148 and 149: Standard Technical Features of BTG
- Page 150 and 151: Standard Technical Features of BTG
- Page 152 and 153: Standard Technical Features of BTG
- Page 154 and 155: Standard Technical Features of BTG
- Page 156 and 157: Standard Technical Features of BTG
- Page 158 and 159: Standard Technical Features of BTG
- Page 160 and 161: Standard Technical Features of BTG
- Page 162 and 163: Standard Technical Features of BTG
- Page 164 and 165: Standard Technical Features of BTG
- Page 166 and 167: Standard Technical Features of BTG
- Page 168 and 169: Standard Technical Features of BTG
- Page 172 and 173: Standard Technical Features of BTG
- Page 174 and 175: Standard Technical Features of BTG
- Page 176 and 177: Standard Technical Features of BTG
- Page 178 and 179: Standard Technical Features of BTG
- Page 180 and 181: Standard Technical Features of BTG
- Page 182 and 183: Standard Technical Features of BTG
- Page 184 and 185: Standard Technical Features of BTG
- Page 186 and 187: Standard Technical Features of BTG
- Page 188 and 189: Standard Technical Features of BTG
- Page 190 and 191: Standard Technical Features of BTG
- Page 192 and 193: Standard Technical Features of BTG
- Page 194 and 195: Standard Technical Features of BTG
- Page 196 and 197: Standard Technical Features of BTG
- Page 198 and 199: Standard Technical Features of BTG
- Page 200 and 201: Standard Technical Features of BTG
- Page 202 and 203: Standard Technical Features of BTG
- Page 204 and 205: Standard Technical Features of BTG
- Page 206 and 207: Standard Technical Features of BTG
- Page 208 and 209: Standard Technical Features of BTG
- Page 210 and 211: Standard Technical Features of BTG
- Page 212 and 213: Standard Technical Features of BTG
- Page 214 and 215: Standard Technical Features of BTG
- Page 216 and 217: Standard Technical Features of BTG
- Page 218 and 219: Standard Technical Features of BTG
<strong>Standard</strong> <strong>Technical</strong> <strong>Features</strong> <strong>of</strong> <strong>BTG</strong> <strong>System</strong> <strong>for</strong> <strong>Supercritical</strong> <strong>660</strong>/800 MW Thermal UnitsOther types <strong>of</strong> displays as applicable <strong>for</strong> convenience <strong>of</strong> operationshall be provided. However, the minimum quantity <strong>of</strong> major types<strong>of</strong> displays shall be as follows:1. Control displays (group/sub-group/sequence/loop) 5002. P&ID/ mimic display 2003. Bar chart 1004. X-Y/ X-T Plot 1005. Operator guidance message 1006. Plant starting/ shutdown guidance message 1007. Other misc. displays 258. <strong>System</strong> status & other diagnostic displays on as required basis.The system shall have adequate storage capacity <strong>for</strong> storing the last72 hours <strong>of</strong> data at scan rate <strong>for</strong> a minimum 500 points (operatorselectable) <strong>for</strong> use in trend displays.d) Logs/ summariesThe system shall generate three basic types <strong>of</strong> reports/logs i.e., eventactivated, time activated and operator demand log & summaries.The system shall have the facility <strong>for</strong> viewing <strong>of</strong> time activated andoperator demand logs/summaries on the TFT(s).1. Event activated logs shall as a minimum include alarm log, tripanalysis log, start-up - shutdown logs (Boiler start-up log,turbine run-up log, turbine shutdown analysis log/ turbine recalllog) & control related logs.2. Time activated logs shall as a minimum include shift log anddaily logs. Each <strong>of</strong> these shall provide hourly record <strong>of</strong> aminimum 225 points sub divided into 15 groups.3. Operator demand logs shall include, as a minimum, trend log,maintenance data log, summary log, per<strong>for</strong>mance logs andsome selected special logs. The system shall be capable <strong>of</strong>generating and printing trend log <strong>for</strong> a minimum <strong>of</strong> 80 groups<strong>of</strong> 15 points each. Maintenance data log shall provide schedule<strong>of</strong> preventive maintenance and routine equipments inspection.4. Various summaries shall include <strong>of</strong>f scan summary, constantssummary, point quality summary, substituted values summary,peripheral status summary etc.157