Clarus L Hydrogen Peroxide Vapour Generator - ENVAIR Deutschland

OperationOperation of the Clarus PORT is simple and automatic.The PORT uses the industry standard Siemens PLC controlsystem to communicate directly with the Clarus L generator.Additional modes of operation are available to decontaminatethe connected workstation isolators and for cleaning andmaintenance.The PORT can also be used as a conventional pass throughusing manual disinfection techniques.Clarus L Hydrogen PeroxideVapour GeneratorThe Clarus L gas generator is used with the Clarus PORTto provide high concentration hydrogen peroxide vapour.The unique ‘dual loop’ configuration of the small and highlymobile Clarus L generator provides rapid and securebio-decontamination using very small quantities of H 20 2.The generator can also be used to decontaminate suitableworkstations and other chambers providing increasedflexibility of use.BIOQUELL provides a comprehensive support service including:●●Commissioning, Validation and MaintenanceFull validation service for equipment and cycle development and verification loads for GMP compliance.(using 6-logbiological challenge)Preventative maintenance contracts and after-sales service support for equipment.● Supply of spare parts and consumables including pre-dispensed hydrogen peroxide solution for use in theClarus L gas generator.BIOQUELL also manufacture hydrogen peroxide vapour generators for room and chamber bio-decontamination and providea routine or emergency bio-decontamination service for facilities, rooms and equipment for those customers who prefer theflexibility of a service.CP-2-PORT6PP-V1.0Your local BIOQUELL agent:34a Walworth RoadAndoverHampshire SP10 5AAUnited KingdomTel: +44 (0)1264 835 835Fax: +44 (0)1264 835 917Email: enquiries@bioquell.comBIOQUELL reserves the right to make changes to specifications without notice and accepts no liability arising from thecontents of this summary literature - ©BIOQUELL (UK) Ltd 2004*subject to load and configuration, the cycle time likely to be in the range of 10-20 minutes.Website: www.bioquell.com