Clarus L Hydrogen Peroxide Vapour Generator - ENVAIR Deutschland

The Clarus ® PORT ** is the most advanced rapidbio-decontamination chamber using low temperature’residue-free’ hydrogen peroxide vapour.The ProcessProduct, components or equipment are loaded into the PORTchamber. The chamber is automatically sealed and using theClarus L hydrogen peroxide gas generator a highconcentration of vapour is produced and distributed evenlythroughout the load. Contact time for biological inactivation isvery short. Hydrogen peroxide vapour is decomposed tooxygen and water at the end of the cycle leaving no residues.On completion the load can be withdrawn on a sliding trolleyinto an aseptic processing workstation or processing area.The entire process takes as little as 15 minutes.ApplicationsThe main applications for the PORT are when used as a biodecontaminationchamber between two aseptic processingworkstations, such as isolators or laminar flow units, or as apass through chamber into a cleanroom for:●●●●●Pharmacy compounding of sterile productsSmall scale aseptic processingSterility testingMaterial fumigation chamber’Stand-alone’ surface decontamination of materials,equipment, instruments and containersBenefitsBecause of the very rapid bio-decontamination cycle it ispossible to utilise the very latest sporicidal gassing techniquesrecommended in EC GMPs for ‘just-in-time’ transfer ofmaterials, equipment and components. This eliminates thelabour-intensive, hazardous, difficult to control and nonvalidatableprocess of manual alcohol spray and wipedisinfection.The PORT has the processing capacity to continuously servetwo aseptic workstations increasing throughput and providingflexibility of operation. Because materials can be transferredonly when they are required, other aseptic storage areas ordevices such as bank isolators and transfer pods can beeliminated reducing space, equipment and cost.The simplicity and ease of the PORT system makes itfavourable with the operators whilst dramatically increasingthe sterility assurance level. Hydrogen peroxide is safe andenvironmentally friendly leaving no residues and has excellentmaterial compatibility with the cleanroom environment andsensitive electronics.The Clarus PORT does not require any plant room installationand is easily installed into existing facilities withoutdisruption.Interfaces:The Clarus PORT is available in 3 interface options:●●●With a circular interface (565mm diameter) for permanant connection to flexible wall isolator canopiesWith a rectangular interface flange for permanant connection to rigid wall workstations or to roomsAs a dockable unit for connection to a simple interface flange mounted on workstations or cleanroom walls** Clarus PORT Patents pending