XR1045 Operation Manual - Xtreme Manufacturing

Preventive MaintenancePreventive MaintenanceEstablishing A Maintenance ProgramThe hour meter installed in the operator control paneldisplays elapsed engine operating hours and has atotal readout of 9,999.9 hours. Use the hour meter andthe schedules contained in this section to establish acomprehensive preventive maintenance program.Lubricate boom pivot point grease fittingsXR1045Lubricate front and rear axle cylinder pivot pointgrease fittingsLubricate boom roller grease fittings and chainsReplace hydraulic return line filterReplace transmission filter and top off fluidAfter Every 50 Hours of OperationLubricate boom pivot point grease fittingsLubricate front and rear axle cylinder pivot pointgrease fittingsAfter Every 250 Hours of OperationFigure 8-1. Hour meter.Maintenance SchedulesEvery Day or 8 Hours of OperationSee Pre-Operation Inspection Checklist (pg 48).After First 50 Hours of OperationComply with 50-Hour Maintenance RequirementsChange engine oil and filterCheck air filter and replace if necessaryCheck tension and condition of drive belts (use tensionmeter to check belt tension)Lubricate front and rear drive shaft grease fittingsLubricate front and rear axle grease fittingsCheck differential oil levelCheck wheel-end oil levelCheck boom chain tension and adjust if necessaryInspect boom rollers and slide blocks for condition andtightnessLubricate boom roller grease fittings and chainsChange engine oil and filtersCheck air filter (replace if necessary)Replace fuel filter and prefilterCheck engine hoses and connections for leaks,damage, and tightnessCheck radiator hoses for leaks, damage, and tightnessCheck electrical cables, leads, and connections fordamage and tightnessCheck for oil and coolant leaksCheck condition and tension of drive belts (use tensionmeter to check belt tension)Lubricate front and rear drive shaft grease fittingsLubricate front and rear axle grease fittingsChange differential oilChange wheel-end oilCheck wheel lug nuts torqued to 380-420 ft-lbsPage 70Xtreme Manufacturing, LLC