XR1045 Operation Manual - Xtreme Manufacturing

XR10457. With lock lever raised, insert quick attach pincompletely through the attachment and quick attachadapter. WarningOperationHydraulic attachments have a maximumhydraulic pressure rating. Failure to makesure the attachment is equipped with apressure reducing valve, or is rated tobe equal or slightly greater than 3,500 psi (241 bar),which is the maximum pressure of the forklift auxiliaryhydraulic system at the quick-disconnect couplers,could result in death or serious injury.Make sure all hydraulic connections are tight (ifequipped).9. Connect the quick attach couplers (this only appliesto attachments with a quick attach hydraulic system).Figure 7-26. Insert Quick Attach Pin Through Attachment and QuickAttach Adapter.8. Release the quick attach lock lever and make sureit has lowered and seated itself in groove (A) of thequick attach pin.Figure 7-28. Connect Quick Attach Couplers.(A) Female Coupler. (B) Male Coupler.Figure 7-27. Make Sure Quick Attach Lock Lever Is Seated In Groove(A) of Quick Attach Pin.For information call (800) 497-1704 Page 61