XR1045 Operation Manual - Xtreme Manufacturing

OperationXR1045Swing Carriage Operation (Optional)The swing carriage pivot left or right using the auxiliaryattachment control lever.Figure 7-17. Fork Ratings.(A) Maximum Load Capacity Rating. (B) 24 Inch Load Center.Because forks are always used in multiples, the totalrating of any combination of forks will be the sum of theirrated capacity. Other than block forks, all forks shouldbe used in matched pairs. Block forks should be used inmatched sets.The maximum load capacity for this forklift is 10,000pounds (4,536 kilograms). The matched pair or set offorks used on this forklift should have total load ratingswhich equal or exceed 10,000 pounds (4,536 kilograms).When the load rating of the forklift differs from the loadcapacity of the forks, the lower value becomes the overallload capacity.Figure 7-19. Auxiliary Attachment Control Lever.Standard Carriage OperationThe standard carriage uses manually adjustable forks andcan be tilted up or down by using the thumb switch onthe control handle.Figure 7-18. Attachment Tilt Control Switch. (A) Attachment TiltDown. (B) Attachment Tilt Up.Page 58Xtreme Manufacturing, LLC