XR1045 Operation Manual - Xtreme Manufacturing

XR1045Shifting Gears WarningDO NOT shift through multiple gears witha single turn of the gear select lever. Allowthe engine speed to slow down beforeshifting to the next lower gear. Improperuse of the gear select lever could cause transmissiondamage or forklift tip over/roll over and could result indeath or serious injury.OperationThe hydraulic oil temperature indicator illuminates whenthe oil temperature is above 180°F (82°C). Stop and idlethe engine, allowing time for cooling. If the indicator doesnot go out after five (5) minutes, shut the engine down.The transmission has four (4) gears that can be used fortraveling in forward or reverse.To shift gears rotate the gear select lever to the next gearwhile the forklift is traveling.• Use first gear (1) for highest torque and pulling power.• Use higher gears for higher ground speed.• Never travel in fourth gear (4) when carrying a load.• Allow the engine speed to slow down before shifting toa lower gear.Warning Indicators and GaugesFigure 7-14. Hydraulic Oil Temperature Indicator.The low brake pressure indicator illuminates if thehydraulic brake oil pressure gets low.If the low brake pressure indicator is illuminated, stopthe forklift, follow proper shut down procedures, tag theforklift with “Do Not Operate” tags, and have a qualifiedmechanic service or repair the forklift BEFORE placing itinto service again. WarningCheck warning indicators and gaugeson the dash panel frequently duringoperation. If a warning indicator isilluminated or a gauge shows abnormalreadings, stop the forklift, follow proper shut downprocedures, tag the forklift with “Do Not Operate”tags, and have a qualified mechanic service or repairthe forklift BEFORE placing it into service again.Ignoring warning indicators can cause improperperformance, which could result in death, seriousinjury, or property damage.Figure 7-15. Low Brake Pressure Indicator.There are three (3) warning indicator lights on the dashpanel that illuminate during critical circumstances. Allthree (3) warning indicators demand immediate attentionand forklift servicing. In many cases the forklift shouldbe shut down as soon as practical to prevent seriousmechanical failure.For information call (800) 497-1704 Page 55