XR1045 Operation Manual - Xtreme Manufacturing

Operator CabFuel GaugeThe fuel gauge indicates the quantity of fuel in the fueltank. The total capacity of the fuel tank is 48 gallons (180liters).XR1045If the coolant gauge shows abnormal readings, stop theforklift, follow proper shut down procedures, tag theforklift with “Do Not Operate” tags, and have a qualifiedmechanic service or repair the forklift before placing itinto service again.Figure 6-27. Coolant Gauge.Figure 6-25. Fuel Gauge.Oil GaugeThe oil gauge indicates the engine oil pressure.Normal engine oil pressure readings should be between40 and 80 PSI.If the oil gauge shows abnormal readings, stop the forklift,follow proper shut down procedures, tag the forklift with“Do Not Operate” tags, and have a qualified mechanicservice or repair the forklift before placing it into serviceagain.Light SwitchesThe Light Switches control two (2) front cab lights, two (2)boom lights, and one (1 ) rear cab light. Toggle the LightSwitches up (ON) or down (OFF).Figure 6-28. Light Switches.Turn Signal and Hazard SwitchesThe Turn Signal Switch controls the turn signals (toggleleft or right). The Hazard Light Switch flashes all four (4)turn signals (toggle up or down).Figure 6-26. Oil Gauge.Coolant GaugeThe coolant gauge indicates the temperature of thecoolant in the engine cooling system. After starting theforklift, allow time for the coolant temp gauge pointerto begin to move before operating the forklift. After theengine has sufficiently warmed up, normal engine coolanttemperature should read between 180 to 200°F.Page 40Figure 6-29. Turn Signal and Hazard Light Switches.Xtreme Manufacturing, LLC