Version 3.1 SP2 Reference Guide - Extreme Networks

Chapter 3To collect information about a device and copy it to the server TFTP directory, complete the followingsteps:1 From the Devices tab, select the device from which you want to collect data.2 From the Device menu, select Telnet into. This option is also available from the right-click contextmenu. A Telnet window into the device opens (Figure 25).3 In the Telnet window, enter the show tech all logto file command. The following example shows thecommand and the command messages:BD-12804.1 # show tech all logto fileshow tech command output is logging into internal-memory...................................................show tech command output file show_tech.log.gz is saved into internal-memoryBD-12804.2 #4 Enter the command upload debug where is the address of the server.When prompted to run the show tech logto file command, enter N. The following example showsthe command and command messages.BD-12804.2 # upload debug 10.210.16.74Do you want to run show tech logto file first? (y/N) No..........................The following files on the MASTER have been uploaded:Tarball Name: BD-12804_AI_09081505.tgz./show_tech.log.gz./trace.devmgr.27844./trace.nodemgr.27845Tarball Name: BD-12804_AC_09081505.tgz./epicenter.cfg./mullai_torino.cfg./primary.cfg./secondary.cfg./snapshot.cfg./torino-0404.cfgBD-12804.3 #In this example, two .tgz archives are created: BD-12804_AI_09081505.tgz and BD-12804_AC_09081505.tgz5 On the server, verify the location of the TFTP folder by clicking Tools > TFTP server configuration.The Configure TFTP Server dialog box (Figure 26) displays the path to the TFTP folder in the SetTFTP Root field.Ridgeline Reference Guide73