Version 3.1 SP2 Reference Guide - Extreme Networks

Configuring RADIUS for Ridgeline Authentication3 Select RADIUS Standard from the Client-Vendor drop-down menu, and type the shared secrettwice. You must use this same shared secret when you configure Ridgeline as a RADIUS client.Figure 507: Setting the shared secret for a RADIUS client4 Click Finish. The new Ridgeline client should now appear in the list of RADIUS Clients under theInternet Authentication Service, as shown in Figure 508.Figure 508: Verify the RADIUS client in IASStep 4. Create a Remote Access Policy for Ridgeline UsersCreate a Microsoft Internet Authentication Remote Access Policy for each type of Ridgeline role thatyou plan to use within Ridgeline. For each different role (predefined roles such as Admin or Manager,or user-defined roles) a Remote Access Policy is needed, configured with the role information that mustbe transmitted to Ridgeline along with the user’s authentication status.To create a Remote Access Policy:1 Under the Internet Authentication Service, right-click the Remote Access Policies folder, select Newand then Remote Access Policy.The New Remote Access Policy Wizard will start. Click New to continue.726Ridgeline Reference Guide