Version 3.1 SP2 Reference Guide - Extreme Networks

AppendixFigure 496: Modifying the PathClick OK.16 Next, open a cygwin window (by double clicking the Cygwin icon ). A black window appears.Figure 497: Configuring the SSH Server Through Cygwin17 At the prompt, enter ssh-host-config.●●●When the script asks about privilege separation be used, answer yes.When the script asks about local user, answer yes.When the script asks about install sshd as a service, answer yes● When the script asks for CYGWIN=, answer ntsec tty18 When the script has finished, while in the (black) cygwin window, start the sshd service by typingnet start sshd.Step 4: Configure Microsoft Firewall to Allow SSH ConnectsBy default the Windows firewall will block incoming SSH (port 22) connections. This section providessteps to permit port 22 through the Windows firewall on the Ridgeline server machine.If there is an SSH server already running on your server, you may be able to skip this step.To configure the Windows Firewall to allow SSH connects, complete the following steps:1 Open the Windows Control Panel and double click the Windows Firewall icon.The Windows Firewall window opens.Ridgeline Reference Guide683