Version 3.1 SP2 Reference Guide - Extreme Networks

Chapter 3A Progress and Results window (shown in Figure 18) appears to show you the progress of the Addcommand.Figure 18: Progress and Results WindowThe symbols that may appear in this window are the following:Purple rotating clock iconGreen check in the checkboxRed X in the checkboxPlus and minus signsUp and down arrowsErrors only boxCollapse All buttonThe add function is in progress.The device has been successfully added.The device cannot be added; the device name is displayed in red.Click the plus sign at the left of the device name to display server messagesrelated to adding the device.Click the minus sign at the left of the device to hide the server messages.Move up and down the device tree, displaying the server messagesassociated with each device.If checked, the up and down arrow buttons expand only devices that haderrors.Collapses all the device nodes, hiding all the server messages.The indicators just below the tree area of the window show the number of devices currently in eachstate.To see the messages related to an Add function (either successful or unsuccessful), select a device in thelist. The messages related to the device are displayed as lines under the device node.CAUTIONIf you close the Discovery Results window without adding devices, the results for devices not already in theRidgeline database are lost. You must perform a discovery again to regenerate information on those devices.After the Add has finished, the Discovery Results window remains open. You can select more devices,specify a different set of Inventory Device Options, and add those devices to Ridgeline.Ridgeline Reference Guide61