Version 3.1 SP2 Reference Guide - Extreme Networks

Using the Universal Port ManagerProfile Testing WizardThe profile testing wizard helps you test a profile on a device before actually deploying it on thenetwork. The wizard allows you to edit and run the profile onto a test device.As a part of profile testing, the profile is deployed onto the selected device and run. When you closeTest Profile dialog box, the profile is not removed (undeployed) from the device. If you wish to deleteprofile from the device, select the profile from the profiles from the Network Profile View, then click theDelete button.To test a profile, select the profile from the Filtered Profiles table in the Managed Profiles view andthen click the Test button.NOTEWhen the profile is run onto the selected device, all operations in the profile script are executed againstthe test device. No rollback is performed at the end of the test session or when Test Profile dialog box is closed.Using the Profile Deployment WizardTo deploy the profile, select the profile from the Filtered Profiles table in the Managed Profiles viewand then click the Deploy button.You can also open the deployment wizard from the New Profile Create window.The deployment wizard opens with the Select Trigger Events page. Use this page to configure thetrigger events that would run the profile after it is deployed to the devices.514Ridgeline Reference Guide