12.07.2015 Views

Version 3.1 SP2 Reference Guide - Extreme Networks

Version 3.1 SP2 Reference Guide - Extreme Networks

Version 3.1 SP2 Reference Guide - Extreme Networks

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Chapter 3The upper part of the Domains tab window contains the following columns:NameDomain-node nameDomain statusDevice modePrimary portSecondary portThe name of the EAPS domain where this device is a member (node), and an iconindicating the domain statusA green ring indicates that all domains in which this device participates are fullyoperational.A yellow ring indicates that one or more of the domains is not fully operational, butis in a transitional state or an unknown state (as when the device is SNMPunreachable).A red ring indicates that one or more of the domains is not operational—if thedevice has a master in a failed state or a Transit node in a “links down” state.A grey ring indicates that the EAPS domain is disabled.The name of the node given to the device as a member of the domain.Status of the node in the domain. This can be Idle, Complete, Failed, Links Up,Links Down, Preforwarding, Init, Precomplete, PreInit, or Unknown.Whether the node acts as a Master or Transit node for this domain.The primary port number.The secondary port number.The lower part of the Domains tab window has two additional tabs: Details of device in domain andProtected VLANs.Details of Device in Domain Tab. When you click the Details of device in domain tab, the followingcolumns are displayed:Domain Node NameEnabledControl VLAN NameControl VLAN TagHello TimerFailed TimerFailed Timer ActionPrimary Port StatusSecondary Port StatusThe name of the node given to the device as a member of a domain.Whether this specific node is enabled as an EAPS node.Name of the control VLANVLAN tag (ID) of the EAPS control VLANThe interval at which the EAPS master polls to check the status of its EAPSmember nodesThe interval after a failure is detected before the Failed Timer expiresAction to be taken when Failed Timer expiresStatus of the primary port: Up, Down, Blocked, or UnknownStatus of the secondary port: Up, Down, Blocked, or UnknownProtected VLANs Tab. When you click the Protected VLANs tab, the following columns aredisplayed:VLAN nameTagThe name of the protected VLANThe ID of the protected VLANShared Ports TabThe upper part of the Shared Ports tab shows information about the shared port(s) on this device. Thelower part shows information about each of the domains that share the port. Select a shared port todisplay the sharing information for that port.Ridgeline <strong>Reference</strong> <strong>Guide</strong>45

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!