12.07.2015 Views

Version 3.1 SP2 Reference Guide - Extreme Networks

Version 3.1 SP2 Reference Guide - Extreme Networks

Version 3.1 SP2 Reference Guide - Extreme Networks

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Managing Your Network InventoryIP forwarding enabledVLAN IP addressVLAN IP maskVirtual routerTypeVlan servicesAdmin StatusWhether IP forwarding is enabled for the VLAN.The IP address of the VLAN.The subnet mask of the VLAN.The virtual router to which the VLAN is associated on the device. This information isavailable if the device has HTTP enabled, and runs <strong>Extreme</strong>XOS software version 12.1or later.The VLAN type, either VLAN or VMAN.VLAN service type. Possible values are Translation, Translation-Member, VMAN,Translation VMAN, Translation-Member VMAN, Private-Network, Isolated-Subscriber,Non-Isolated Subscriber, Super VLAN, and Sub VLAN.See “Viewing VLAN Services Information” on page 175 for more information.The administrative state of the VLAN, either Enabled or Disabled. This information isavailable if the device has HTTP enabled, and runs <strong>Extreme</strong>XOS software version 12.1or later.Selecting a VLAN in the table causes information about the ports in the VLAN to be displayed in thePorts table in the lower part of the window. The Ports table contains the following information:NumberPort number. If the device is a chassis device, then the port number is displayed inslot:port format.NameThe name of the port, if assigned.TaggedWhether the port is tagged.MediaThe port media, if applicable.Type Port type; for example, Gigabit, Management, 10/100.Actual speedActual duplexConfigured speedConfigured duplexStateSpeed of the port; Auto if the speed is auto-negotiated.The configured speed of the port.Duplex of the port, either full or half.The configured duplex setting of the port.Whether the port is enabled or disabled.EAPS Domains TabThe EAPS Domains tab displays EAPS information for an individual device. It contains the followingsub-tabs:● Domains● Shared ports● Domain ports● Device settingsDomains TabThe upper part of the Domains tab shows information about the device in relation to each of the EAPSdomains of which it is a member. The lower part shows information about a selected domain node.Select a node to display domain node details and protected VLAN information.44Ridgeline <strong>Reference</strong> <strong>Guide</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!