12.07.2015 Views

Version 3.1 SP2 Reference Guide - Extreme Networks

Version 3.1 SP2 Reference Guide - Extreme Networks

Version 3.1 SP2 Reference Guide - Extreme Networks

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Managing and Monitoring EAPS DomainsTo create an EAPS shared link, complete the following steps:1 Under Network Views, from the Protocol menu, select New > Shared link. The New Shared Linkwindow is displayed, as shown in Figure 183.Figure 187: New Shared Link Window2 Select the link that will make up shared link. You can specify only one link to be used as a sharedlink.3 Enter values for the EAPS timeout values and Expiry action, if you want to use values other than thedefault.4 When you have finished configuring shared link, click the Create shared link button to start thevalidation and deployment process.Creating Protected VLANs, VMANs, and BVLANsAn EAPS domain consists of one master node and one or more transit nodes, and includes one controlVLAN and one or more protected VLANs. To create a protected VLAN, use the following procedure.The procedure for creating protected VLANs is the same for protected VMANs (Virtual MetropolitanArea <strong>Networks</strong>) and protected BVLANs (Backbone VLANs) used in the configuration of PBB (ProviderBackbone Bridge) networks.254Ridgeline <strong>Reference</strong> <strong>Guide</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!