Version 3.1 SP2 Reference Guide - Extreme Networks

Managing and Monitoring EAPS DomainsNOTEYour devices must be running ExtremeWare 7.7 or later, or ExtremeXOS 11.3 or later in order to berecognized by Ridgeline as EAPS nodes. ExtremeXOS 11.6 is required for full EAPS functionality within Ridgeline.Configuring EAPSUsing Ridgeline, you can perform the following EAPS configuration tasks:●●●●●Create an EAPS domainModify settings in an EAPS domainCreate a shared linkSpecify protected VLANs, VMANs, and BVLANsDelete an EAPS domainFor more information on Ridgeline’s network resource provisioning feature, see “Provisioning NetworkResources” on page 103.Creating an EAPS DomainTo create an EAPS domain, complete the following steps:1 From Network Views in on the Folder list go to the All map or ALL table view, and select the deviceyou want to include.Or,Choose ports.2 From the Protocol menu, click Edit > New > EAPS domain on the menu bar.Or,Select at least two or more links, then right-click to open the menu.The New EAPS Domain window opens as shown in Figure 183.250Ridgeline Reference Guide