Version 3.1 SP2 Reference Guide - Extreme Networks

Managing Virtual MachinesEnabling VM Tracking On a SwitchYou must enable the VM tracking feature on XNV switches to use the tracking feature. The VMTracking wizard lets you specify ports and enable or disable VM tracking on a switch.NOTEYou must turn VM tracking on for ports as well as for devices.To use the wizard, complete the following steps:1 On the menu bar, click File > Enable monitoring of > VM information. The devices dialog boxopens. See Figure 145.Figure 145: Select Device or Device Group Wizard2 Select Devices or Device groups. If you select Devices, a window opens and asks “Monitor VMs onwhich devices?” See Figure 146. It shows the switch names and their IP addresses. If you selectDevice groups, a window opens showing ports, device names, and IP addresses. See Figure 147. Thefollowing devices are disabled (and appear grayed out) when these conditions exist:●●●●Device is already enabled for VM monitoring.Device does not support VM monitoring.Device has Identity Management enabled.When all devices in the group belong to all the cases described, the group is disabled.NOTERemoving all ports on a switch disables tracking for the switch.216Ridgeline Reference Guide