Version 3.1 SP2 Reference Guide - Extreme Networks

Managing Multi-Switch Link Aggregation GroupsTypeA port typeType of link: physical or virtualDevice port protocolDevices TableThe descriptions of the columns on the Devices table are as follows:Column NameNameIP addressISC VLAN nameISC VLAN tagISC VLAN IP addressPeer nameVRPort countCheck point statusRx checkpoint messagesHello errorsHello timeoutsUp timeLocal Tx IntervalRemote Tx IntervalTx HellosTx Check PointsCheck point errorsPeer Connect errorsDescriptionName of deviceIP address of deviceName of the inter-switch connection VLAN through which the MLAG peercan be reachedInter-switch connection VLAN tagInter-switch connection VLAN IP addressName of MLAG peer switchName of the VR with which the MLAG peer VLAN is associated withNumber of MLAG ports associated with this MLAG peerCheckpointing status of this MLAG peer: up or downNumber of checkpoint messages received from the MLAG peer switchNumber of hello error messagesNumber of hello time out messagesSpecifies the time that the connectivity with the MLAG peer switch is upLength of the time, in milliseconds, between transmissions of health checkhello packetsTransmitting hello Interval of MLAG peer switch in millisecondsNumber of health check hellos transmittedNumber of transmitted checkpoint messagesNumber of checkpoint ErrorsNumber of MLAG peer switch connect errorsPeer State TableColumn NameLocal link statusRemote link statusLocal failure countRemote failure countDescriptionLocal MLAG port status. It reflects the status of entire LAG when LAG is used inconjunction with MLAG. Values: active, disabled, ready, and port not presentRemote MLAG port status. Values: up, down, and not availableNumber of ports that are down in the local MLAG portNumber of ports that are down in the remote MLAG portCustomer VLANs TableColumn NameTypeVLAN serviceDescriptionType of VLANType of VLAN service204Ridgeline Reference Guide