12.07.2015 Views

Version 3.1 SP2 Reference Guide - Extreme Networks

Version 3.1 SP2 Reference Guide - Extreme Networks

Version 3.1 SP2 Reference Guide - Extreme Networks

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Chapter 9A port statusA link stateA port typeA port share detailsB device statusB device worst alarmB port statusB link stateB port typeB port share detailsWhether the port on the A side of the link is enabled or disabled.Whether the A side of the link is ready to exchange traffic with the B side of the link.The type of port on the A side of the link.Information about the port sharing configuration on the A side of the link, ifconfigured.The current status of the device on the B side of the link.The status of the highest alarm on the device on the B side of the link.Whether the port on the B side of the link is enabled or disabled.Whether the B side of the link is ready to exchange traffic with the A side of the link.The type of port on the B side of the link.Information about the port sharing configuration on the B side of the link, ifconfigured.Viewing VLAN Services InformationIf the VLAN service type column for the VLAN indicates that a service is configured for the VLAN,additional information is displayed in the VLAN details window, next to the Ports tab. Depending onthe type of service configured, one of the following tabs may be displayed:●●●●●●●Translation VLAN tabTranslation-Member VLAN tabPrivate VLAN tabIsolated-Subscriber VLAN tabNon-Isolated Subscriber VLAN tabSuper VLAN tabSub VLAN tabNOTEIf a VLAN configured on one device does not have a service configured for it, but a VLAN configured on asecond device does have a service configured for it, and also has the same name, tag, and protocol as the VLANon the first device, then it may not be clear in Ridgeline displays which of the VLANs has the service configured onit. Consequently, it is recommended that you use different names for VLANs with services and VLANs withoutservices, so that both kinds of VLANs appear correctly in Ridgeline displays.Translation VLAN TabIf you select a device in the Device/Ports table that has a Translation VLAN configured (indicated by“Translation” in the VLAN service type column) the Translation VLAN tab appears.The Translation VLAN tab contains the following information:● The name of the Translation VLAN● The name of the network to which the Translation VLAN belongs● The tagged and untagged ports in the Translation VLANRidgeline <strong>Reference</strong> <strong>Guide</strong>175

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!