Version 3.1 SP2 Reference Guide - Extreme Networks

Chapter 6●●While the commands are being rolled back, if the switch goes offline (that is, becomes no longermanaged by Ridgeline), the commands continue to be rolled back until they have all been removed.If the device becomes unreachable, or it is not possible to log into the device to roll back thecommands, then the rollback process for the device fails, and Ridgeline displays an error message.NOTEOnly one provisioning request can be processed on the Ridgeline server at a time. If you attempt to makemultiple provisioning requests at the same time, such as simultaneously from two different Ridgeline clients, anerror message is displayed.Viewing Logged Information about ProvisioningTasksRidgeline logs information about the provisioning tasks it has performed on managed devices. You canview this information in the Ridgeline Audit Log.To display the Audit Log, click on Audit Log under the Network Administration folder. The Audit Logview is displayed, as shown in Figure 55. Click the Provisioning tab to view a table of the provisioningtasks that have been run on the Ridgeline server.In the Filters box, you can limit the display to the provisioning tasks that were run over a specified timeperiod, or that contain specified text in the table or the progress and results details window. Click a rowin the table to display the progress and results details for the selected provisioning task.Ridgeline Reference Guide111