Veritas CommandCentral™ Hardware and Software Compatibility List

CommandCentral 5.2Hardware and Software Compatibility ListMon Oct 04 09:04:06 PDT 2010Documentation version 5.2.0tocCommandCentral StorageSystem and OS RequirementsSwitchesStorage DevicesHBAsMiscellaneous DevicesSoftware CompatibilitySAN device vendor hardware and software information frequently changes. It is strongly recommended that youdownload the latest version of this document from the Symantec Web site:http://www.symantec.com/docs/S:TECH139892TechNotes referenced in this document are available at:http://www.symantec.com/enterprise/support/index.jspCopyright © 2010 Symantec Corporation. All rights reserved. Symantec, the Symantec logo, Veritas, CommandCentral, NetBackup, SANPoint, SANPoint Control,and Storage Foundation are trademarks or registered trademarks of Symantec Corporation or its affiliates in the U.S. and other countries. Other names may be trademarksof their respective owners.1

eqCommandCentral Storage - System and OS RequirementsComponent OS* System+Management ServerStandard AgentPush Install UtilityBrowser SupportMicrosoft Windows 2000 (SP3 or later) Server, Advanced Server,Datacenter ServerMicrosoft Windows 2003 Server: Standard Edition, DatacenterEdition (32-bit and 64-bit), Enterprise Edition (32-bit and 64-bit),Web EditionMicrosoft Windows 2008 R2 Server: Standard Edition, DatacenterEdition, Enterprise Edition, Web Edition (64-bit)Microsoft Windows 2008 Server: Standard Edition, DatacenterEdition, Enterprise Edition, Web Edition (32 and 64-bit)Solaris 8, 9,10 *2&*8VMware Windows Guest OS - Windows 2003 server (32-bit and 64-bit) , Windows 2008 server (32-bit and 64-bit)HP-UX 11i v1 (11.11)HP-UX 11i v2 (11.23)HP-UX 11i v2 0904 (11.23 PI)HP-UX 11i v3 (11.31 PI) *5HP-UX 11i v3 (11.31) *5IBM AIX 5.2 *3IBM AIX 5.3 *4&*7IBM AIX 6.1 *7Red Hat Linux Advanced Server 3.0 (32-bit)Red Hat Linux Advanced Server 4.0 (32bit)Red Hat Linux Enterprise Server 3.0 (32-bit)Red Hat Linux Enterprise Server 4.0 (32-bit,64-bit)Red Hat Linux Enterprise Server 5.0 (32-bit, 64-bit) *6Solaris 8, 9,10 *2Suse Linux Enterprise Server 10 (32-bit, 64-bit) *5&*6Suse Linux Enterprise Server 9 (32-bit, 64-bit) *5&*6Windows 2000 (SP3 or later) Server, Advanced Server, DatacenterServerWindows 2003 Server: Standard Edition, Datacenter Edition (32and 64-bit), Enterprise Edition (32 and 64-bit), Web EditionWindows 2008 R2 Server: Standard Edition, Datacenter Edition,Enterprise Edition, Web Edition (64-bit)Windows 2008 Server: Standard Edition, Datacenter Edition,Enterprise Edition, Web Edition (32 and 64-bit) *5Windows 2000 (SP3 or later) Server, Advanced Server, DatacenterServerWindows 2003 Server: Standard Edition, Datacenter Edition (32and 64-bit), Enterprise Edition (32 and 64-bit), Web EditionWindows 2008 Server: Standard Edition, Datacenter Edition,Enterprise Edition, Web Edition (32 and 64-bit)1GHz Quad processor + 8GB RAM (16GB for CommandCentralStorage + Storage Change Manager) Pentium-based servers:Pentium 4 64-bit: Xeon/Opteron1GHz Quad processor + 8GB RAM (16GB for CommandCentralStorage + Storage Change Manager) Pentium-based servers:Pentium 4 64-bit: Xeon/Opteron1GHz Quad processor + 8GB RAM (16GB for CommandCentralStorage + Storage Change Manager) Pentium-based servers:Pentium 4 64-bit: Xeon/Opteron1GHz Quad processor + 8GB RAM (16GB for CommandCentralStorage + Storage Change Manager) Pentium-based servers:Pentium 4 64-bit: Xeon/Opteron1GHz UltraSPARC® IIIi dual processors + 8GB RAM (16GB forCommandCentral Storage + Storage Change Manager)ESX server 3.5 or later, Guest OS should have a minimum of 2processors + 8GB RAM (16GB for CommandCentral Storage +Storage Change Manager)PA-RISC 2.0 and PCI HBA based systems: Superdome, V Class,N Class, L Class , 400/500, rp-series + 16/512MB RAMItanium 2 based systems: Integrity servers + 16/512MB RAMPA-RISC 2.0 and PCI HBA based systems: Superdome, V Class,N Class, L Class , 400/500, rp-series + 16/512MB RAMPA-RISC 2.0 and PCI HBA based systems: Superdome, rp-series+ 16/512MB RAMItanium 2 based systems: Integrity servers + 16/512MB RAMPseries + 16/512MB RAMP5 5xx + 16/512MB RAMP5 5xx + 16/512MB RAM433 MHz Intel x86 equivalent + 256/512MB RAM433 MHz Intel x86 equivalent + 256/512MB RAM433 MHz Intel x86 equivalent + 256/512MB RAM433 MHz Intel x86 equivalent + 256/512MB RAM433 MHz Intel x86 equivalent + 256/512MB RAMUltra 5 or higher, including SPARC clone equivalents from Fujitsu+ 256/512MB RAM *1433 MHz Intel x86 equivalent + 256/512MB RAM433 MHz Intel x86 equivalent + 256/512MB RAM733 MHz Pentium 4 + 256/512MB RAM 1733 MHz + 256/512MB RAM 1 Pentium-based servers: Pentium 464-bit: Xeon/Opteron1 GHz + 512MB RAM 1 GHz (x86 processor) or 1.4 GHz (x64processor) 64-bit: Xeon/Opteron1 GHz + 512MB RAM 1 GHz (x86 processor) or 1.4 GHz (x64processor) 64-bit: Xeon/Opteron733 MHz Pentium 4 + 512MB RAM733 MHz + 512MB RAM Pentium-based servers: Pentium 4 64-bit: Xeon/Opteron1 GHz + 512MB RAM 1 GHz (x86 processor) or 1.4 GHz (x64processor) 64-bit: Xeon/OpteronSolaris Mozilla 1.7WindowsMicrosoft Internet Explorer 6.x, 7.x Mozilla Firefox 1.07, 1.5,2.0.0.x or 3.02

Control HostSolaris 9, 10Windows server 2000 (SP3 or Later)Supported editions include: Server, Advanced Server, and Datacenter ServerWindows server 2003 Supported editions include: 32-bit: Standard,Datacenter, Enterprise, and Web; 64-bit(Xeon/Opteron): Datacenter and EnterpriseWindows server 2008 Supported editions include (32-bit and 64-bit): Standard, Datacenter, Enterprise, and WebSPARC + 512 MB RAM733MHz + 512MB RAM733MHz + 512MB RAM1GHZ + 512MB RAM† Minimum recommended configuration. Memory requirement is in addition to what is already being consumed by other applications on the system.*1 For Memory Requirements for CommandCentral Storage managed hosts, the first number is without Array Management, the second is with Array Management.*2 CommandCentral Storage package is not recommended to be installed on non-global zones on the Solaris OS platform.*3 CommandCentral Storage requires ML7 or later for AIX 5.2 and ML3 or later for AIX 5.3.*5 Array Management and NetApp Unified Storage Discovery capabilities are not supported on Red Hat Linux Enterprise Server 5.0, Suse Linux Enterprise Server 9 & 10, HPUX 11i v3 and VMware ESX platforms.*6 CommandCentral Managed Host is not supported and will fail to install if SE Linux is enabled on Linux systems.*7 For AIX hosts with LPARs, Virtual devices are not supported.*8 SUN T-series servers are not recommended.* Refer to Release Notes to verify appropriate patch levelsswi13

CommandCentral Storage - SwitchesSwitchVendorBrocadeDCX BackboneSilkWorm 12000SilkWorm 200ESilkWorm 24002800 2040 22402050 2250SilkWorm 24000Silkworm 300SilkWorm 3200,3800Model Firmware Ancillary SW OS Platform Features SNMPMIB6.0.1a, 6.1.0c, 6.1.0f,6.1.0j, 6.1.1, 6.1.1d,6.1.2b, 6.2.0, 6.2.0g,6.2.1b, 6.2.2, 6.2.2a,6.3.0c, 6.3.14.4.0b, d, e, 4.4.15.0.1a, b, 5.0.3, 5.0.4,5.0.5c, 5.0.5d, 5.0.5f5.0.1, 5.0.3, 5.0.5c,5.0.5d, 5.0.5f, 5.1.0,5.1.0a, 5.1.0d, 5.2.0a,5.2.1b, 5.3.0, 5.3.1a,5.3.1b, 5.3.2, 6.0.0,6.0.1a, 6.1.0, 6.1.0c,6.1.0f, 6.1.0j, 6.1.1,6.1.1d, 6.1.2b, 6.2.0,6.2.0g, 6.2.1b, 6.2.2,6.2.2a2.6.1, 2.6.1a, b, c2.6.2a, b, c, d4.4.0b, d, e 5.0.1a, b,5.0.3, 5.0.4, 5.0.5c,5.0.5d, 5.0.5f, 5.1.0,5.1.0a, 5.1.0d, 5.2.0a,5.2.1b, 5.3.0, 5.3.1a,5.3.1b, 5.3.26.0.1a, 6.1.0c, 6.1.0f,6.1.0j, 6.1.1, 6.1.1d,6.1.2b, 6.2.0, 6.2.0g,6.2.1b, 6.2.2, 6.2.2a,6.3.0c, 6.3.13.1, 3.1.1, 3.1.1b, d3.1.2, 3.1.3, 3.1.3b3.2.0a, 3.2.1DiscoveryHard ZoningMulti-Zone SetZoningPortEnable/DisableTrunkingDiscovery HardZoning Multi-ZoneSet Zoning PortEnable/DisableTrunkingMonitoringAlertingNotesSilkWorm 3250,38504.4.0b, d, e 5.0.1a, b,5.0.3, 5.0.4, 5.0.5c,5.0.5d, 5.0.5f, 5.1.0,5.1.0a, 5.1.0d, 5.2.0a,5.2.1b, 5.3.0, 5.3.1a,5.3.1b, 5.3.24

CommandCentral Storage - SwitchesSwitchVendorSilkWorm 3900SilkWorm 4100SilkWorm 48000Model Firmware Ancillary SW OS Platform Features SNMPMIB4.4.0b, d, e, 4.4.15.0.1a, b, 5.0.3, 5.0.4,5.0.5c, 5.0.5d, 5.0.5f,5.1.0, 5.1.0a, 5.1.0d,5.2.0a, 5.2.1b, 5.3.0,5.3.1a, 5.3.1b, 5.3.24.4.0b, d, e 5.0.1a, b,5.0.3, 5.0.4, 5.0.5c,5.0.5d, 5.0.5f, 5.1.0,5.1.0a, 5.1.0d, 5.2.0a,5.2.1b, 5.3.0, 5.3.1a,5.3.1b, 5.3.2, 6.0.0,6.0.1a, 6.1.0, 6.1.0c,6.1.0f, 6.1.0j, 6.1.1,6.1.1d, 6.1.2b, 6.2.0,6.2.0g, 6.2.1b, 6.2.2,6.2.2a, 6.3.0c, 6.3.15.0.5c, 5.0.5d, 5.0.5f,5.1.0, 5.1.0a, 5.1.0d,5.2.0a, 5.2.1b, 5.3.0,5.3.1a, 5.3.1b, 5.3.2,6.0.0, 6.0.1a, 6.1.0,6.1.0c, 6.1.0f, 6.1.0j,6.1.1, 6.1.1d, 6.1.2b,6.2.0, 6.2.0g, 6.2.1b,6.2.2, 6.2.2a, 6.3.0c,6.3.1Brocade SMI providerv120.7.2b, v120.8.0,v120.10.0 (Refer theNotes section for Proxyswitch firmwarecompatibility with SMIprovider)Windows2003,Windows2000,Windows2008,Solaris8,Solaris9,Solaris 10DiscoveryHard ZoningMulti-Zone SetZoningPortEnable/DisableTrunkingFA MIB3.0 FEMIBBrocadeFC MIBMonitoringAlertingSupportedNotesCommandCentral 5.2 has SMI-S only configuration option for Brocade. Discovery of switches usingBrocade API was removed from the CommandCentral 5.1 onwards as Brocade has EOLed theseAPI interfaces.For users migrating from CommandCentral 5.0 to the 5.2 version, its recommended to convert thediscovery method from API to SMI-S. Users need to remove the old API configuration from theCommandCentral Console and configure Explorers with the SMI-S agents using 5.0MP1_RP6.Contact Symantec Technical Support for more details.Minimum version of FOS firmware for Proxy switch is 5.3.1a, 6.x is the recommended version(SMI-S requirement). For the Brocade SMIS Agent v120.8.0 and above, the minimum Proxy switchfirmware is FOS 6.x. Use the Brocade SMIS Agent 120.7.2b for Proxy switch with 5.3.1a or 5.3.2firmware.Always pick the highest version of firmware in the Fabric for the proxy switch.Users may need to upgrade switch firmware while they move from API mehod of discovery to SMISdiscovery method.Install SMI-S agent(s) on Windows or Solaris hostsProxy switches are configured using the SMI-S agent GUIProxy switches must have user credentials with "admin" permissionCommandCentral discovers these Brocade switches, as well as their role in the fabric(principal/subordinate), total/free ports, port status, objects connected to each port, zoninginformation, and more.Note: Zoning license is required on switches for zoning administration to be functional inCommandCentral Storage.Fabric and Zoning Management of switches requires an out-of-band connection.~MPR supports basic Discovery, LSAN zoning. No monitoring supportPerformance monitoring is not supported with SNMP V3.Silkworm 49005.1.0, 5.1.0a, 5.1.0d,5.2.0a, 5.2.1b, 5.3.0,5.3.1a, 5.3.1b, 5.3.2,6.0.0, 6.0.1a, 6.1.0,6.1.0c, 6.1.0f, 6.1.0j,6.1.1, 6.1.1d, 6.1.2b,6.2.0, 6.2.0g, 6.2.1b,6.2.2, 6.2.2a, 6.3.0c,6.3.15

CommandCentral Storage - SwitchesSwitchVendorBrocade andMcDATA mixedfabrics(Interoperability)Silkworm 5000Silkworm 5100Silkworm 5300SilkWorm 6400SilkWorm 7500SilkWorm AP7420MultiprotocolRouter (MPR)Brocade andMcDATA modelsModel Firmware Ancillary SW OS Platform Features SNMPMIB5.2.1, 5.3.1a, 5.3.1b,5.3.2, 6.0.0, 6.0.1a,6.1.0, 6.1.0c, 6.1.0f,6.1.0j, 6.1.1, 6.1.1d,6.1.2b, 6.2.0, 6.2.0g,6.2.1b, 6.2.2, 6.2.2a,6.3.0c, 6.3.16.0.1a, 6.1.0c, 6.1.0f,6.1.0j, 6.1.1, 6.1.1d,6.1.2b, 6.2.0, 6.2.0g,6.2.1b, 6.2.2, 6.2.2a,6.3.0c, 6.3.12.6.1, 2.6.1a, b, c2.6.2a, b, c, d5.1.0, 5.1.0a, 5.1.0d,5.2.0a, 5.2.1b, 5.3.0,6.0.0, 6.1.0, 5.3.1a,5.3.1b, 5.3.2, 6.0.1a,6.1.0c, 6.1.0f, 6.1.0j,6.1.1, 6.1.1d, 6.1.2b,6.2.0, 6.2.0g, 6.2.1b,6.2.2, 6.2.2a, 6.3.0c,6.3.17.3.0c7.4.xBrocade FOSFirmware: 5.xMcData EOS Firmware:9.6.2 or higher.OSMS Must be enabledon all McData SwitchesBrocade FOSFirmware: 6.xMcData EOS Firmware:9.6.2 or higher.OSMS Must be enabledon all McData SwitchesEFCM : 9.7.1,2,3 or 4Fabric DiscoveryMethod:McData SMIS2.6.2,2.7.1Brocade API ( Requiresa CCS 5.0MP1RP6Control Host )Interopmode :Interopmode 1DCFM: 10.1.x, 10.3.3Fabric DiscoveryMethod:McData SMIS2.6.2,2.7.1Brocade SMIS 120.8.0Brocade SMIS 120.10.0Interoperability Modes:Interopmode 3 (OpenFabric)EFCM : 9.7.1,2,3 or 4Fabric DiscoveryMethod:McData SMIS2.6.2,2.7.1Brocade SMIS 120.8.0Brocade SMIS 120.10.0Interoperability Modes:Interopmode 2 (McDataFabric),Interopmode 3 (OpenFabric)Windows2003,Windows2008,Solaris9,Solaris 10MonitoringAlertingMonitoring isnot supportedfor McDataSwitches withDCFMNotesNote: McData switches need to be discovered via McData SMI-S in Proxy Mode to EFCM.Brocade switches need to be discovered via Brocade API (a CCS 5.0MP1RP6 Control Host).Performance monitoring is not supported with SNMP V3.Note: McData switches need to be discovered via McData SMI-S in Proxy Mode to DCFM.Brocade switches need to be discovered via Brocade SMI Agent.Performance monitoring is not supported with SNMP V3.Note: McData switches need to be discovered via McData SMI-S in Proxy Mode to EFCM.Brocade switches need to be discovered via Brocade SMI Agent.Performance monitoring is not supported with SNMP V3.6

CommandCentral Storage - SwitchesSwitchVendorCiscoMDS 9120 MDS9124 MDS 9134MDS 9140MDS 9216 MDS9506 MDS 9509MDS 9513Model Firmware Ancillary SW OS Platform Features SNMPMIB1.3.3c, 1.3.4a, b 2.01b,2.1.1a, b, 3.0.1, 3.0.3b3.1.2a, 3.1.3a, 3.2.2.c,3.3.1a, 3.1.1c1.2, 1.3.4a, b 2.0.1b,2.1.1a, b 3.0.1, 3.0.3b3.1.2a, 3.1.3a, 3.2.2.c,3.3.1a, 3.3.1c ,4.1(1b)(MDS 9513 only)SNMPSolaris 8,Solaris9,Solaris10,Windows2000,Windows2003,Windows2008DiscoveryHard Zoning*Multi-Zone SetZoning PortEnable/DisableTrunkingMDSMIBSNMPIF MIBMonitoringAlertingSupportedNotesVSAN, Zone, Port Bundle (Port Channels), Module, and Slot discovery supported. VSAN, and Zonemanagement supported. SNMP v3 supported.*Discovery of hard zones supported.7

CommandCentral Storage - SwitchesSwitchVendorDS-8B2, 16B2DS-32B2Model Firmware Ancillary SW OS Platform Features SNMPMIB3.1, 3.1.1, 3.1.1b, d3.1.2, 3.1.3, 3.1.3b3.2.0a, 3.2.14.4.0b, d, e, 4.4.15.0.1a, b, 5.0.3, 5.1.0Brocade SMI providerv120.7.2b, v120.8.0,v120.10.0 (Refer to theNotes section for Proxyswitch firmwarecompatibility with SMIprovider)DiscoveryHard ZoningMulti-Zone SetZoningMonitoringAlertingNotesEMC(Connectrix)ED-48000B5.0.5c, 5.0.5d, 5.0.5f,5.1.0, 5.1.0a, 5.1.0d,5.2.0a, 5.2.1b, 5.3.0,5.3.1a, 5.3.1b, 5.3.2,6.0.0, 6.0.1a, 6.1.0,6.1.0c, 6.1.0f, 6.1.0j,6.1.1, 6.1.1d, 6.1.2b,6.2.0, 6.2.0g, 6.2.1b,6.2.2a, 6.3.0c, 6.3.1Windows2003,Windows2000,Windows2008,Solaris8,Solaris9,Solaris 10information, and more.FA MIB3.0 FAMIB 3.1 Supported CommandCentral 5.2 has SMI-S only configuration option for Connectrix.For users migrating from CommandCentral 5.0 to the 5.2 version, its recommended to convert thediscovery method from SWAPI to SMI-S. Users need to remove the old SWAPI configuration fromthe CommandCentral web GUI and configure Explorers with the SMI-S agents using 5.0MP1_RP6.Contact Symantec Technical Support for more details.For EMC-B series fabrics, the minimum version of FOS firmware for Proxy switch is 5.3.1a, 6.x is therecommended version (SMI-S requirement). For the Brocade SMIS Agent v120.8.0, the minimumProxy switch firmware is FOS 6.x. Use the Brocade SMIS Agent 120.7.2b for Proxy switch with5.3.1a or 5.3.2 firmware.Other EMC-B models listed in this document which do not have the minimum firmware version canbe used as target switches. Always pick the highest version of firmware in the Fabric for the proxyswitch. Users may need to upgrade switch firmware while they move from API mehod of discovery toSMIS discovery method. Install SMI-S agent(s) on Windows or Solaris hosts. Proxy switches areconfigured using the SMI-S agent GUI. Proxy switches must have user credentials with "admin"permission.For EMC-M series fabrics, the McData SMI Agent 2.6.2 and 2.7.1 are compatible with EFCM9.7.1,2,3 or 4 and EFCM 9.6.xIt is not recommended to install SMI-S agent on the CommandCentral Management Server. SMI-Sagent should be installed preferably on a Windows host. Host on which EFCM is running may beused. One SMI-S agent per EFCM is the recommended scale. Its required to uninstall theSWAPI Bridge Agent.CommandCentral Storage discovers these switches, as well as their role in the fabric(principal/subordinate), total/free ports, port status, objects connected to each port, zoningNote: Zoning license is required on switches for zoning administration to be functional inCommandCentral Storage.Fabric and Zoning Management of switches requires an out-of-band connection.Discovery and management of EMC-B series fabrics require installation of a qualified Brocade SMI-Sprovider configured to the Brocade switch explorer on a CommandCentral Storage host.Discovery and management of EMC M-series fabrics require installation of a qualified McDATA SMI-S provider configured to the McDATA Switch explorer on a CommandCentral host.McDATA SMI-S provider v2.0 or later versions support zoning discovery and management in fabriczoning mode only.Global zones and zonesets must be imported to fabric zoning libraries for them to be discovered andmanaged.Active zones and zoneset must be duplicated into inactive zones and zoneset before they can bemanaged in direct switch connection mode.Monitoring of switches discovered through McDATA SMI-S provider in proxy mode requires setting"EFCMIPAddress".Monitoring of switches discovered through McDATA SMI-S provider in direct switch connection modeis not supported.Monitoring is not supported with DCFM.8

CommandCentral Storage - SwitchesSwitchVendorDS-24M2 DS-32M2 ED-140MDS-12000BDS-220B, DS-4900BModel Firmware Ancillary SW OS Platform Features SNMPMIB6.00.00, 6.01.00,6.02.00 7.01, 7.01.028.00.00, 8.01.00,9.01.00, 9.02.00,9.06.00, 9.07.02,9.09.03, 9.09.06,9.09.074.4.0b, d, e, 4.4.15.0.1a, b, 5.0.3, 5.0.4,5.0.5c, 5.0.5d, 5.0.5f5.1.0, 5.1.0a, 5.1.0d,5.2.0a, 5.2.1b, 5.3.0,5.3.1a, 5.3.1b, 5.3.2,6.0.0, 6.0.1a, 6.1.0,6.1.0c, 6.1.0f, 6.1.0j,6.1.1, 6.1.1d, 6.1.2b,6.2.0, 6.2.0g, 6.2.1b,6.2.2a, 6.3.0c, 6.3.1(6.3.x not supported byDS-220B)McDATA SMI-S Agent2.6.2, 2.7.1 (BrocadeSMI agent for EOSproducts)Brocade SMI providerv120.7.2b, v120.8.0,v120.10.0 (Refer to theNotes section for Proxyswitch firmwarecompatibility with SMIprovider)DiscoveryMulti-Zone SetZoning PortEnable/DisableDiscovery HardZoning Multi-ZoneSet ZoningMonitoringAlertingNotes9

CommandCentral Storage - SwitchesSwitchVendorMcDATAES-3016 ES-3032 ES-3216ES-3232 ED-6064 ED-6140Intrepid 10000**Sphereon 4300Sphereon 4400,Sphereon 4700Sphereon 4500Model Firmware Ancillary SW OS Platform Features SNMPMIB6.00.00, 6.01.00,6.02.00 7.01.00,7.01.02 8.00.00,8.01.00, 9.01.00,9.02.00, 9.06.00,9.07.02, 9.08.01,9.09.03 (6140,6064,323only),9.09.06 (6140,6064,323only),9.09.07 (6140,6064,323only)6.03.01, 6.05.00,9.01.00, 9.02.00,9.06.00, 9.07.029.01.00, 9.02.00,9.06.00, 9.07.02,9.08.01, 9.09.03,9.09.06, 9.09.078.00.00, 8.01.00,9.01.00, 9.02.00,9.06.00, 9.07.02,9.08.01, 9.09.03,9.09.06, 9.09.076.00.00, 6.01.00,6.02.00 7.01.00,7.01.02 8.00.00,8.01.00, 9.01.00,9.02.00, 9.06.00,9.07.02, 9.08.01,9.09.03, 9.09.06,9.09.07McDATA SMI-S Agent2.6.2 Compatible withEFCM 9.7.1,2,3 or 4or EFCM 9.6.x,SMI-S Agent 2.7.1Solaris 8,Solaris9,Solaris10,Windows2000,Windows2003,Windows2008DiscoveryMulti-Zone SetZoning PortEnable/DisableMonitoringAlertingNotesFA MIB3.0 FAMIB 3.1 Supported CommandCentral 5.2 has SMI-S only configuration option for McData. Discovery of switches usingSWAPI is removed from the CommandCentral 5.1 release onwards as Brocade has EOLed theseAPI interfaces.For users migrating from CommandCentral 5.0 to the 5.2 version, its recommended to convert thediscovery method from SWAPI to SMI-S. Users need to remove the old SWAPI configuration fromthe CommandCentral web GUI and configure Explorers with the SMI-S agents using 5.0MP1_RP6.Contact Symantec Technical Support for more details.SMI Agent 2.6.2 is compatible with EFCM 9.7.1, 9.7.2, 9.7.3, 9.7.4 or 9.6.xIt is not recommended to install SMI-S agent on the CommandCentral Management Server.SMI-S agent should be installed preferably on a Windows host. Host on which EFCM is running maybe used.One SMI-S agent per EFCM is the recommended scale.Its required to uninstall the SWAPI Bridge Agent.Refer to McData SMI-S Agent 2.6.2 Users Guide. Chapter 1, page 8 "Memory and CPUrecommendations. contains SMIS Memory/CPU/Sizing information and JVM resizing instructions.Monitoring of switches discovered through McDATA SMI-S provider in proxy mode requires setting"EFCMIPAddress".Monitoring of switches discovered through McDATA SMI-S provider in direct switch connection modeis not supported.i10K switches with virtualization is not supported.Monitoring is not supported for i10k switches for firmware 9.x.Monitoring is not supported with DCFM.Performance monitoring is not supported with SNMP V3.10

CommandCentral Storage - SwitchesSwitchVendorQLogicSAN BOx2- 64SANbox 5200,SANbox, 5600,SANbox 5602Model Firmware Ancillary SW OS Platform Features SNMPMIB2.0.0.033.05.0.1.10.0SANbox 9000 6.6.0.14.0SANBox2-8,SANBox2-165.0.1.10.0 N/A2.0.0.033.05.0.1.10.0Windows 2000,Windows 2003,Windows 2008,Solaris 8,9,10AIX, HP-UX,LinuxDiscoveryMulti-Zone SetdiscoveryFA MIB3.0MonitoringAlertingNotSupportedNotesTopology and zoning discovery through GS explorer.No zoning or port management.Monitoring is not supported.Each QLogic switch maintains its own zoning database. ONLY inactive zones and zonesets on theswitch inband connected to a CommandCentral Storage host will be discovered."Orphaned Zonesets" are not supported.11

CommandCentral Storage - Storage DevicesstoStorageDeviceVendorModel OS Platform Monitoring &AlertingManagement/ ExtendedfeaturesAncillary SWNotes3PARInserv E200,T400InServ S400XSolaris 8,Solaris9,Solaris10,Windows2000,Windows2003,Windows2008EnvironmentalDeep MappingFirmware 2.2.2 (with Embedded SMI-S 1.1provider)Requires a network connection to the arrays and the CIMVAIL Explorer.The CIM Agent (SMI-S provider) runs on the array controller itself (in other words, it isembedded with controller software).The embedded SMI-S provider, by default, is turned off. This needs to turned on bylogging into thearray if you want to manage this array via CommandCentral Storage.Thin Provisioning and array management operations are not supported.12

CommandCentral Storage - Storage DevicesStorageDeviceVendorModel OS Platform Monitoring &AlertingManagement/ ExtendedfeaturesAncillary SWNotesAX100 AX150Environmental~PerformanceLUN Creation and DeletionLUN MaskingMulti LUN MaskingRSV Creation and DeletionDeep MappingSnapshot Discovery (SnapViewSnapshots, SnapView Clone,MirrorView (Sync))NAVCLI 6.19, 6.22, 6.24, 6.26, 6.29NAVISECCLI (Secure CLI mode) also supported.Thin provisioning and Data de-duplication not supported.Celerra NS20,NS80, NSX,NS700G,NS500G,NS20FC, NS700Not SupportedVirtual Data mover.Celerra Array management is notsupported.DART 5.5.26.4 - 5.6.43iSCSI discovery is supported from both managed server platform. iSCSI storagecorrelation issupported on Windows only and requires use of Microsoft iSCSI initiator version 2.02.Supports correlation of the physical disks of the Celerra storage system and theirbackend arrayvolumes (LUNs).Checkpoint and replication is not supported for CCS 5.2.CLARiiON CX4Solaris 8,Solaris9,Solaris10,Windows2000,Windows2003,Windows2008NAVCLI 6.28, 6.29 CX-4 arrays need minimum version of Navicli 6.28.EMCCLARiiONCX200 CX400CX600CLARiiONCX300 CX500CX700CLARiiON CX3-10 CX3-20CX3-40 CX3-80Environmental~PerformanceLUN Creation and DeletionLUN MaskingMulti LUN MaskingRSV Creation and DeletionDeep MappingSnapshot Discovery (SnapViewSnapshots, SnapView Clone,MirrorView (Sync))NAVCLI 6.7, 6.16, 6.19, 6.24, 6.26, 6.29NAVCLI 6.19, 6.22, 6.24, 6.26, 6.28, 6.29See the EMC Support Matrix to determine which storage array firmware version iscompatible with a given NAVICLI version.Network connectivity is required between the storage arrays and the host whereNAVICLI is installed.The storage array configuration must be "Shared Access Configuration" whichrequires Access Logix support enabled.NAVISECCLI (Secure CLI mode) also supported.NAVISECCLI (Secure CLI mode) also supported. Management operations are notsupported for CX4 arrays.CLARiiONFC4700FC4700-2LUN Creation and DeletionLUN MaskingMulti LUN MaskingDeep MappingNAVCLI 6.7, 6.16, 6.19, 6.24, 6.26See the EMC Support Matrix to determine which storage array firmware version iscompatible with a given NAVICLI version.Network connectivity is required between the storage arrays and the host whereNAVICLI is installed.The storage array configuration must be "Shared Access Configuration", whichrequires Access Logix support enabled.NAVISECCLI (Secure CLI mode) also supported.13

CommandCentral Storage - Storage DevicesStorageDeviceVendorModel OS Platform Monitoring &AlertingManagement/ ExtendedfeaturesAncillary SWNotesFor discovery, the VCMDB LUN must be visible to the host where the EMC SolutionsEnabler and VolumeLogix (if required) are installed. With Enginuity 5670 and later,access to the VCM database does not require that the VCM device be mapped to anFA and presented to a server, as long as there are gatekeepers available.DMX 800 10002000 3000DMX-3 DMX-4Windows2000,Windows2003,Windows2008,Solaris8,Solaris 9,Solaris10,HP-UX 11iv2*,AIX 5.2,AIX5.3,Linux Red HatAS/ES v3.0, v4.0(32 bit)**LUN Creation and DeletionLUN MaskingLUN BindingMulti LUN MaskingMulti LUN BindingDeep MappingSnapshot(BCV, Clone, Snap)DiscoverySRDF Discovery *1Virtual provisioning (DMX-3 andDMX-4)EMC Solutions Enabler 5.5, 6.0, 6.2, 6.3.1, 6.4,6.5.1, 7.0, 7.1.2The discovery (but no array management) is supported via SYMAPI server as well, inwhich the case VCMDB LUN must be visibleto the host where SYMAPI server is installed. The CommandCentral Symmetrixexplorer still needs the EMC Solutions Enabler (SYMCLI) to beinstalled on the host (where the explorer is running) and it (SYMCLI) should beconfigured to access the SYMAPI server host over IP.Do not run more than one tool (GUI or CLI) at the same time which alters the devicemasks on an array, because this can corrupt array configuration data.CommandCentral cannot discover ESCON type Front End Directors; only FibreChannel type Front End Directors are supported.Performance Reporting is only supported on Windows and Solaris hosts.*For HP-UX 11i v2, for the list of the required OS patches/updates please refer theCommandCentral StorageRelease Notes (System Requirements).6.3.0 SYMCLI has issues with snapshot discovery, 6.3.1 is recommended.EMC Solutions Enabler 6.0.2 qualified for AIX 5.2 ML05 only.For non-meta LUN deletion, requires 5670 with EMC Solutions Enabler 5.3 or above.1 If EMC Symmetrix/DMX has SRDF enabled, then SYMCLI 6.2 or later is requiredfor the SRDF discovery.For discovery, the VCMDB LUN must be visible to the host where the EMC SolutionsEnabler and VolumeLogix (if required) are installed. With Enginuity 5670 and later,access to the VCM database does not require that the VCM device be mapped to anFA and presented to a server, as long as there are gatekeepers available.Symmetrix3000 50008000Windows2000,Windows2003,Windows2008,Solaris8,Solaris 9,Solaris10,HP-UX 11iv2,AIX 5.2,AIX5.3,Linux (AS/ES)3.0,Linux (AS/ES)4.0 32-bitEnvironmental~PerformanceLUN Creation and DeletionLUN MaskingLUN BindingMulti LUN MaskingMulti LUN BindingDeep MappingSnapshot(BCV) DiscoverySRDF Discovery *1EMC Solutions Enabler 5.5, 6.0, 6.2, 6.3.1, 6.4,6.5.1, 7.0, 7.1The discovery (but no array management) is supported via SYMAPI server as well, inwhich the case VCMDB LUN must be visibleto the host where SYMAPI server is installed. The CommandCentral Symmetrixexplorer still needs the EMC Solutions Enabler (SYMCLI) to beinstalled on the host (where the explorer is running) and it (SYMCLI) should beconfigured to access the SYMAPI server host over IP.Do not run more than one tool (GUI or CLI) at the same time which alters the devicemasks on an array, because this can corrupt array configuration data.CommandCentral cannot discover ESCON type Front End Directors; only FibreChannel type Front End Directors are supported.Performance Reporting is only supported on Windows and Solaris hosts.*For HP-UX 11i v2, for the list of the required OS patches/updates please refer theCommandCentral StorageRelease Notes (System Requirements).6.3.0 SYMCLI has issues with snapshot discovery, 6.3.1 is recommended.EMC Solutions Enabler 6.0.2 qualified for AIX 5.2 ML05 only.For non-meta LUN deletion, requires 5670 with EMC Solutions Enabler 5.3 or above.1 If EMC Symmetrix/DMX has SRDF enabled, then SYMCLI 6.2 or later is requiredfor the SRDF discovery.14

CommandCentral Storage - Storage DevicesStorageDeviceVendorModel OS Platform Monitoring &AlertingManagement/ ExtendedfeaturesAncillary SWNotesFor discovery, the VCMDB LUN must be visible to the host where the EMC SolutionsEnabler and VolumeLogix (if required) are installed. With Enginuity 5670 and later,access to the VCM database does not require that the VCM device be mapped to anFA and presented to a server, as long as there are gatekeepers available.VMAXWindows2000,Windows2003,Windows2008,Solaris8,Solaris 9,Solaris10,HP-UX 11iv2*,AIX 5.2,AIX5.3,Linux Red HatAS/ES v3.0, v4.0(32 bit)**Management Not SupportedDeep MappingSnapshot(BCV, Clone, Snap)DiscoverySRDF DiscoveryVirtual ProvisioningEMC Solutions Enabler 7.0, 7.1.2Discovery of masking information supported only if auto-provisioning groups are usedfor masking. StorageAdmin privileges are required for the explorer host if authorizationis enabled on the array for full masking discovery.The discovery (but no array management) is supported via SYMAPIserver as well, in which the case VCMDB LUN must be visibleto the host where SYMAPI server is installed. The CommandCentral Symmetrixexplorer still needs the EMC Solutions Enabler (SYMCLI) to beinstalled on the host (where the explorer is running) and it (SYMCLI) should beconfigured to access the SYMAPI server host over IP.Do not run more than one tool (GUI or CLI) at the same time which alters the devicemasks on an array, because this can corrupt array configuration data.CommandCentral cannot discover ESCON type Front End Directors; only FibreChannel type Front End Directors are supported.Performance Reporting is only supported on Windows and Solaris hosts.*For HP-UX 11i v2, for the list of the required OS patches/updates please refer theCommandCentral Storage Release Notes (System Requirements).Discovery of DLDEV devices is not supported.EngenioFujitsuE2400, E5600XBBETERNUS3000 100 300500 600 700ETERNUS4000 100 300400 500 600ETERNUS6000 700 9001100ETERNUS8000 900 11002200ETERNUS2000 100,200ETERNUSDX60, DX80and DX90ETERNUSDX410, DX440,DX8100,DX8400,DX8700Solaris 8,Solaris9,Solaris10,Windows2000,Windows2003,Windows2008Solaris 8,Solaris9,Solaris10,Windows2000,Windows2003,Windows2008EnvironmentalPerformanceEnvironmentalLUN BindingLUN Creation and DeletionMulti LUN BindingMulti LUN MaskingRSV Creation and DeletionDeep MappingLUN BindingLUN Creation and DeletionMulti LUN BindingMulti LUN MaskingRSV Creation and DeletionDeep MappingEngenio SMIS Provider (SMI-S 1.1 basedCIMOM):v9.16.G0.17,v9.16.G0.34,v9.19.G0.17,v9.19.G0.19,v9.23.G0.00,v9.70.G0.02,v10.10.G0.04,v10.35.G0.00,v10.50.G0.04Storage Vendors CIM object Manager (CIMOM,SMIS-S 1.1 based): v1.40.2(This version doesnot support E8000/E4000 models.) v1.40.9v2.0.1.0 Embedded CIMOM provider versionV10L70-0000 (for E2000)Storage Vendors CIM object Manager (CIMOM,SMI-S 1.1 based): v1.40.2(This version doesnot support E8000/E4000 models.) v1.40.9v2.0.1.0. Minimum embedded CIMOM providerversion (SMI-S 1.2 based) V10L70-0000 (forE2000)and V10L20-0000 (for DX60/DX80/DX90).Storage Vendors CIM object Manager (CIMOM,SMIS-S 1.1 based): v1.40.2(This version doesnot support E8000/E4000 models.) v1.40.9v2.0.1.0 Embedded CIMOM provider versionV10L70-0000 (for E2000)Requires a network connection to the arrays that are managed through CIM.Requires a network connection to the host where the CIMVAIL explorer is installed.Download the Engenio SMI-S provider from here:http://www.lsi.com/storage_home/products_home/external_raid/management_software/smis_provider/index.htmlv10.10.G0.04 supports only discovery. No management is supported.Requires a network connection to the arrays that are managed through CIM.Requires a network connection to the host where the CIMVAIL explorer is installed.For E8000/E400 models, SMI-S provider v2.0.1.0 or later is required.Interop namespace "root/eternus"Requires a network connection to the arrays that are managed through CIM.Requires a network connection to the host where the CIMVAIL Explorer is installed.Note: ETERNUS 2000 Model 100/200 and ETERNUS DX60/DX80/DX90 were testedwith embedded CIMOM.Interop namespace “interop”Requires a network connection to the arrays that are managed through CIM.Requires a network connection to the host where the CIMVAIL explorer is installed.For Dx400/Dx8000 models, SMI-S provider v2.0.1.0 or later is required.Interop namespace "root/eternus"15

CommandCentral Storage - Storage DevicesStorageDeviceVendorModel OS Platform Monitoring &AlertingManagement/ ExtendedfeaturesAncillary SWNotesGeneric SMI-S1.1, 1.2Vendorsconforming toSMI-S 1.1, 1.2and inbandsupport byCommandCentralSolaris 8,Solaris9,Solaris10,Windows2000,Windows2003,Windows2008Not SupportedSMI-S Provider (CIMOM) from the vendor thatpassed CTP testCommandCentral Storage discovers arrays that: 1) are compliant with and pass CTPconformance testing; 2) support profiles that are required by CommandCentralStorage.*http://www.snia.org/ctp/conformingproviders#11provider (link to SMI-S CTPconformance test)*Please refer to the product management for latest support as the SMI-S standard isan emerging standard and may need specific client testing due to varied profiles in thestandard and their interpretations by vendors16

CommandCentral Storage - Storage DevicesStorageDeviceVendorModel OS Platform Monitoring &AlertingManagement/ ExtendedfeaturesAncillary SWNotesRefer to the Hitachi Freedom Storage Lightning 9900 Series Array Requirementssection of the CommandCentral Storage Hardware and Software Configuration Guidefor more information.FreedomStorageStorageLightning 9900Series 9910,9960, 9970,9980HiCommand Device Manager: 4.0, 4.1, 4.25.0, 5.1, 5.5, 5.6, 5.7, 5.8, 5.9, 6.0, 6.1.1, 6.2,6.3, 6.4HiCommand Tuning Manager: 4.x, 5.x,6.0, 6.1,6.2, 6.3, 6.4 (For Performance Statistics Only)Also refer to Hitachi CE Firmware Field Upgrade Procedures (RN-SP001-00) foradditional information.Japanese Model Equivalents:9000=SANRISE20009910=SANRISE22009960=SANRISE2800*1 Discovery of COW pools/V-VOLs is not supported.*2 All arrays that participate in TrueCopy sessions should be configured for discoveryunder the same explorer process for complete pair discovery.HDSFreedomStorageThunder 9200FreedomStorageThunder 9500Series 9530V9533V 9570V9580V 9585VSolaris 8,Solaris9,Solaris10,Windows2000,Windows2003,Windows2008EnvironmentalPerformanceLUN BindingLUN Creation and DeletionLUN MaskingMulti LUN MaskingMulti LUN BindingDeep MappingSnapshots (ShadowCopy,QuickShadow *1) Replication(TrueCopy *2)HiCommand Device Manager: 4.0, 4.1, 4.25.0, 5.1, 5.5, 5.6, 5.7, 5.8, 5.9, 6.0, 6.1.1, 6.2,6.3, 6.4HiCommand Tuning Manager: 4.x, 5.x,6.0, 6.1,6.2, 6.3, 6.4 (For Performance Statistics Only)Refer to the Hitachi HiCommand Storage Array Requirements section of theCommandCentral Storage Hardware and Software Configuration Guide for moreinformation.Japanese Model Equivalents:9200=SANRISE1100/1200*1 Discovery of COW pools/V-VOLs is not supported.*2 All arrays that participate in TrueCopy sessions should be configured for discoveryunder the same explorer process for complete pair discovery.Refer to the Hitachi HiCommand Storage Array Requirements section of theCommandCentral Storage Hardware and Software Configuration Guide for moreinformation.Japanese Model Equivalents:9530V=SANRISE9530V9533V=SANRISE9533V9570V=SANRISE9570V9970V=SANRISE9970V9980V=SANRISE9980V*1 Discovery of COW pools/V-VOLs is not supported.*2 All arrays that participate in TrueCopy sessions should be configured for discoveryunder the same explorer process for complete pair discovery.Tagma AMS200 500 1000Tagma WMS100 AMS2100, 2300,2500TagmaUSP/SE9990100 600 1100NSC55 USP-VLUN BindingLUN Creation and DeletionLUN MaskingMulti LUN MaskingMulti LUN BindingDeep MappingSnapshots (ShadowCopy,QuickShadow *1) Replication(TrueCopy *2)Thin ProvisioningHiCommand Device Manager:4.2, 5.0, 5.1, 5.5, 5.6, 5.7, 5.8, 5.9, 6.0, 6.1.1,6.2, 6.3, 6.4HiCommand Tuning Manager: 4.x, 5.x, 6.0, 6.1,6.2, 6.3, 6.4 (For Performance Statistics Only)HiCommand Device Manager: 4.0, 4.1, 4.25.0, 5.1, 5.5, 5.6, 5.7, 5.8, 5.9, 6.0, 6.1.1, 6.2,6.3, 6.4HiCommand Tuning Manager: 4.x, 5.x,6.0, 6.1,6.2, 6.3, 6.4 (For Performance Statistics Only)For USP-V, HiCommand Device Manager 5.7 or later is required.CommandCentral 5.2 supports thin-provisioning for USP-V.HDvM 5.9 not supported for USP-VThe CommandCentral Management Server and the HiCommand Tuning Managerhost should be in the same timezone*1 Discovery of COW pools/V-VOLs is not supported.*2 All arrays that participate in TrueCopy sessions should be configured for discoveryunder the same explorer process for complete pair discovery.For USP-V, HiCommand Device Manager 5.7 or later is required.HDvM 5.9 not supported for USP-VThe CommandCentral Management Server and the HiCommand Tuning Managerhost should be in the same timezone*1 Discovery of COW pools/V-VOLs is not supported.*2 All arrays that participate in TrueCopy sessions should be configured for discoveryunder the same explorer process for complete pair discovery.17

CommandCentral Storage - Storage DevicesStorageDeviceVendorModel OS Platform Monitoring &AlertingManagement/ ExtendedfeaturesAncillary SWNotesEVA 4x00,6x00, 8x00Environmental (onlywith SSSU v6.0 andlater)LUN Creation and DeletionLUN MaskingRSV Creation and DeletionDeep MappingSSSU for HP StorageWorks CommandViewEVA v4.0, v4.1, v5.0, v6.0, v7.0, v8.0, v9.0,v9.2.0Command View EVA software v4.0Command View EVA software v5.0Command View EVA software v6.0Command View EVA software v7.0Command View EVA software v8.0Command View EVA software v9.2.0Command View EVA software v9.2.1Requires a fibre connection between the Management Appliance and the arrays beingmanaged. Requires a network connectivity between the Management Appliance andthe host where the SSSU is installed.SSSU for HP StorageWorks CommandViewEVAv4.0, v4.1, v5.0, v6.0, v7.0, v8.0,v9.0, v9.2.0HP announced a mandatory factory modification for HP 5000 arrays, only the softwareand firmware versions listed here are supported.HPEVA 3000,5000xp 128, xp1024,xp12000,xp24000Solaris 8,Solaris9,Solaris10,Windows2000,Windows2003,Windows2008Not SupportedDeep MappingCommand View EVA software v4.0Command View EVA software v5.0Command View EVA software v6.0Command View EVA software v7.0Command View EVA software v8.0Command View EVA software v9.2.0Command View EVA software v9.2.1CommandView XP AE 6.0 with HP CIMOM SMI-S ProviderRequires a fibre connection between the Management Appliance and the arrays beingmanaged.Requires a network connectivity between the Management Appliance and the hostwhere the SSSU is installed.Correlation of luns belonging to backend arrays is not supported for HP XP arraysdiscovered via SMIS.XP 48 XP 128XP 512 XP1024 XP 10000XP 12000 XP24000EnvironmentalLUN BindingLUN Creation and DeletionLUN MaskingMulti LUN BindingMulti LUN MaskingRSV Creation and Deletion*Deep MappingSnapshotsCommandView XP AE 1.0.0-01, 5.0, 5.7, 6.0* Vendor issue for CV AE older than 5.0 : LUSE destruction fails to destroy underlyingsegments.For XP24000, CommandView XP AE 5.7 or later is required.No thin-provisioning support for XP 24000.18

CommandCentral Storage - Storage DevicesStorageDeviceVendorModel OS Platform Monitoring &AlertingManagement/ ExtendedfeaturesAncillary SWNotesDS4100DS4300 (FASt-T 600) DS4400(FASt-T 700)DS4500 (FASt-T 900) DS4700DS4800EnvironmentalLUN BindingLUN Creation and DeletionMulti LUN BindingMulti LUN MaskingRSV Creation and DeletionDeep MappingEngenio SMIS Provider (SMI-S 1.1 basedCIMOM):v9.16.G0.17,v9.16.G0.34,v9.19.G0.17,v9.19.G0.19,v9.23.G0.00,v9.70.G0.02,v10.10.G0.04,v10.35.G0.00,v10.50.G0.04Requires a network connection to the arrays that are managed through CIM.Requires a network connection to the host where the CIMVAIL Explorer is installed.Requires a network connection to the arrays that are managed through CIM.Requires a network connection to the host where the CIMVAIL Explorer is installed.DS6000 SeriesDS6800 (1750-511) DS8000Series DS8100(2107-921)DS8300 (2107-922)EnvironmentalPerformanceLUN Binding LUN Creation andDeletion Multi LUN Binding MultiLUN Masking Deep MappingIBM SMI-S Provider (SMI-S 1.1 based CIMOM):v5.2.1.139, v5.3.0.x(SMI-S 1.2 based CIMOM):v5.3IBM DS OPEN API v5.4Extent Pool/Rank/Array (Volume Space equivalent for IBM ESS) management notsupported.Download the SMI-S provider from here:http://www-947.ibm.com/systems/support/supportsite.wss/selectproduct?taskind=2&brandind=5000033&familyind=5329497&typeind=0&modelind=0&osind=0&psid=sr&continue.x=1Minimum FW requirement for the arrays for support via SMI-S: - DS6000 - 5.0.6.235(LIC) /6.0.600.23 (bundle) - DS8000 - 5.1.0.309 (LIC) / 6.1.0.44 (bundle)v5.3.0.x supports both Embedded and proxy CIMOMs for DS8XXX arrays.Performance monitoring requires IBM CIMOM version 5.3 and above(i.e SMIS version1.2).IBMDS8700(941)ESS (Shark)F20 800ESS (Shark)F10Solaris 8,Solaris9,Solaris10,Windows2000,Windows2003,Windows2008Monitoring notsupportedEnvironmentalPerformanceEnvironmentalLUN BindingLUN CreationMulti LUN BindingMulti LUN MaskingDeep MappingLUN CreationLUN MaskingMulti LUN MaskingRSV Creation and DeletionDeep MappingIBM embedded CIMOM v5.5.0.6IBM SMI-S Provider (SMI-S 1.1 based CIMOM):v5.2.1.139(SMI-S 1.2 based CIMOM):v5.3Enterprise Storage Server CLI versions:2.2.0.0, 2.3.1.1, 2.3.1.22.4.2.33Requires a network connection to the arrays that are managed through CIM.DS8700 only supports Embedded CIMOM.Requires a network connection to the arrays that are managed through CIM.Requires a network connection to the host where the CIMVAIL Explorer is installed.Volume Deletion and Volume SpaceManagement is not supported.Download the SMI-S provider from here:http://www-947.ibm.com/systems/support/supportsite.wss/selectproduct?taskind=2&brandind=5000033&familyind=5329497&typeind=0&modelind=0&osind=0&psid=sr&continue.x=1Minimum FW requirement for the arrays for support via SMI-S: - ESS F20 - 2.3.3.89 -ESS 800 -2.4.3.56Network connectivity is required between the storage array(s) and the host where theESS CLI is installed.JRE 1.3.1 or later installed on the host where the ESS CLI is installed.Windows platforms must be rebooted after installing the ESS CLI.N series(RebrandedNetapp) N3000series N5000seriesEnvironmentalPerformance (Windowsand Solaris basLUN MaskingDeep MappingvFilersSnapShotsSnapmirrorsFlexVolsFlexClonesONTAP 6.5.x 7.0.x 7.1.x 7.2.xThin provisioning not supported (7.x)19

CommandCentral Storage - Storage DevicesStorageDeviceVendorNECNetAppSUNModel OS Platform Monitoring &AlertingSAN VolumeController(SVC)2145XIV A14-2810,XIV A14-2812NEC Storageseries iStorageseriesF87 FAS200Series, FAS800Series, FAS900Series,FAS3000Series,FAS6000Series,NearStoreSeries, VD173, D178,D220, D280,6540(FLEXLINE380), 6130,6140, 6180,6580, 6780SunStorageTek9910, 9960,9970, 9980SunStorageTek9985, 9990,9990 RoHS,9985V, 9990VSolaris 9,Solaris10,Windows2000,Windows2003,Windows2008Solaris 8,Solaris9,Solaris10,Windows2000,Windows2003,Windows2008Solaris 8,Solaris9,Solaris10,Windows2000,Windows2003,Windows2008Solaris 8,Solaris9,Solaris10,Windows2000,Windows2003,Windows2008EnvironmentalPerformanceManagement/ ExtendedfeaturesDeep Mapping Correlation withbackend volumesThin ProvisioningAncillary SWIBM SVC SMI-S 1.0.3 Provider:SVC 4.1.1SVC 4.2IBM SVC SMI-S 1.2 Provider:SVC 4.2.1SVC 4.3SVC 4.3.1SVC 5.1Embedded SMI-S 5.1.0.6IBM XCLI V2.4.1Environmental Deep Mapping NEC SMIS Provider v1.1EnvironmentalPerformance (Windowsand Solaris basEnvironmentalPerformanceLUN MaskingDeep MappingvFilersSnapShotsSnapmirrorsFlexVolsFlexClonesDedup Attributes DiscoveryLUN BindingLUN Creation and DeletionMulti LUN BindingMulti LUN MaskingRSV Creation and DeletionDeep MappingONTAP 6.5.x 7.0.x 7.1.x 7.2.x7.3.xEngenio SMIS Provider (SMI-S 1.1 basedCIMOM):v9.16.G0.17,v9.16.G0.34,v9.19.G0.17,v9.19.G0.19,v9.23.G0.00,v10.10.G0.04,v10.35.G0.00,v10.50.G0.04HiCommand Device Manager: 6.0NotesRequires a network connection to the arrays(SVC) that are managed through CIMagent (SMI-S Provider).Requires a network connection to the host where the CIMVAIL Explorer is installed.The CIM Agent for SVC runs on the SVC master console.The backend arrays, attached to the IBM SVC, should also be configured separatelyin CommandCentral Storage in order to have the backend lun correlation support.Arrays qualified as backend arrays for SVC: HDS 9900, EMC Clarion, IBM DS8000,IBM DS4x00.Performance monitoring requires firmware version 4.2.1 and above.(i.e SMIS version1.2).XCLI can be downloaded from the IBM XIV site:http://www-947.ibm.com/support/entry/portal/Overview/Hardware/System_Storage/Disk_systems/Enterprise_Storage_Servers/XIV_Storage_System_%282810,_2812%29Requires a network connection to the arrays that are managed through CIM.Requires a network connection to the host where the CIMVAIL explorer is installed.Contact NEC support for the access to the SMI-S provider software.Thin provisioning not supported.iSCSI discovery is supported from both Management Server platforms, iSCSI storagecorrelation is supported on Windows only and requires use of Microsoft iSCSISoftware Initiator Version 2.02 or later on Windows 2003 OS. For Windows 2008native initiator is required.Supports the correlation of the physical disks of NetApp V-Series storage systems andtheir backend array volumes (LUNs).All FAS models compatible with ONTAP 7.3.x version are supported.Dedup attributes are discovered if the array supports the feature and appropriatelicenses are installedBased on LSI/Engenio information of comparative models.Requires a network connection to the arrays that are managed through CIM.Requires a network connection to the host where the CIMVAIL explorer is installed.Needs SMI-SProvider version 9.23.G0.00 or later.Download the Engenio SMI-S provider from here:http://www.lsi.com/storage_home/products_home/external_raid/management_software/smis_provider/index.htmlNote: No management operation is supported.Refer to the Hitachi Freedom Storage Lightning 9900 Series Array Requirementssection of the CommandCentral Storage Hardware and Software Configuration Guidefor more information.Refer to the Hitachi HiCommand Storage Array Requirements section of theCommandCentral Storage Hardware and Software Configuration Guide for moreinformation.No thin provisioning supported.20

CommandCentral Storage - HBAshbaHBA Vendor Model OS Drivers Features Supported NotesBrocade415, 425, 815, 825 Solaris 10Linux Red Hat AS 5.0 32-bit,Linux Red Hat AS 5.064-bitSuse Linux ES 9 32-bit,Suse Linux ES 9 64-bit,Suse Linux ES 10 32-bit,Suse Linux ES 10 64-bitWindows 2003-32bit,Windows 2003-64bit,Windows 2008 32-bit,Windows 2008 64-bitV 2.1.0.0V 1.1.0.8V 1.0.0.02V 2.1.0.0V 1.1.0.7V 1.0.0.02V 2.1.0.0V 1.1.0.8V 1.0.0.02V 2.1.0.0V 1.1.0.8V 1.0.0.04V 2.1.0.2V 2.2.0.2Note: HBA monitoring and HBA-port status monitoring is not supported.22

CommandCentral Storage - HBAsHBA Vendor Model OS Drivers Features Supported NotesEmulexLP10000, LP10000DC,LPe11002, LPe11000,LPe11000, LPe1150,LP1150-E, LPe1150-E,LP11002, LP11000LP10000DC, LP10000,LP9402DCLP1050, LP1050DCLP11000, LPe11002,LPe11000, LP11002,LP9002C, LP9002S,LP9002DC, LP9002LLinux Red Hat AS 3.0 32-bitLinux Red Hat AS 4.0 32-bitLinux Red Hat AS 4.0 64-bitLinux Red Hat AS 5.0 32-bit,Linux Red Hat AS 5.064-bitSuse Linux ES 10 32-bit,Suse Linux ES 10 64-bitSuse Linux ES 9 32-bit,Suse Linux ES 9 64-bitWindows 2000,Windows2003- 32bitWindows 2003-32bitWindows 2003-64bitWindows 2008 32-bit,Windows 2008 64-bitSolaris 8,Solaris9,Solaris10Linux Red Hat AS 3.0 32-bitLinux Red Hat AS 4.0 32-bitLinux Red Hat AS 4.0 64-bitLinux Red Hat AS 5.0 32-bit,Linux Red Hat AS 5.064-bitSuse Linux ES 10 32-bit,Suse Linux ES 10 64-bitSuse Linux ES 9 32-bit,Suse Linux ES 9 64-bitWindows 2003-64bitWindows 2008 32-bit,Windows 2008 64-bit7.1.14, 7.3.68.0.6.278.0.16.408.2.0.63, 8.2.0.22, 8.2.0.298.2.0.638.0.16.475-1.10a4, 1.20a3 5-2.21a7, 5-2.22a8,5-2.23a6 2.30a2, 2.40a2, 2.41a1,2.42a0 (SCSIport) 5.10a10, 5.31a0(STORport) 1.11a3, 1.20a3, 1.20a7,1.30a6, 1.30a95-2.41a1, 2.42a0 (SCSIport)5.10a10, 5.31a0 (STORport)1.11a3,1.20a3,1.20a7,1.30a6,1.30a9, 2.01a4, 2.30.0166-1.10a4, 2.30.016, 1.20a3(STORport) 1.11a3, 1.20a3, 1.20a7,1.30a6, 1.30a9STORport 2.01a4, 2.30.0166.01f(Solaris 8,9 only), 6.21g, 6.30g7.1.14, 7.3.68.0.6.278.0.16.408.2.0.22, 8.2.0.29, 8.2.0.638.2.0.638.0.16.476-1.10a4, 1.20a3(STORport) 1.11a3, 1.20a3, 1.20a7,1.30a6, 1.30a9, 2.01a4, 2.30.016STORport 2.01a4, 2.30.016Solaris 8,9,10 6.10g, 6.11c, 6.21g, 6.30gLinux Red Hat AS 5.0 32-bit,Linux Red Hat AS 5.064-bitSuse Linux ES 10 32-bit,Suse Linux ES 10 64-bit8.2.0.638.2.0.29, 8.2.0.6323

CommandCentral Storage - HBAsHBA Vendor Model OS Drivers Features Supported NotesLP11002, LP11000,LP1150, LPe11002,LPe11000, LPe1150,LP1005DC-CM2,LP10000ExDC,LP1050Ex, LP10000DLP8000, LP9000Suse Linux ES 9 32-bit,Suse Linux ES 9 64-bitWindows 2003 32-bit,Windows 2003 64-bitWindows 2008 32-bit,Windows 2008 64-bitLinux Red Hat AS 3.0 32bitLinux Red Hat AS 4.0 32-bitLinux Red Hat AS 4.0 64-bitLinux Red Hat AS 5.0 32-bitLinux Red Hat AS 5.0 32-bit,Linux Red Hat AS 5.064-bitLinux Red Hat AS 5.0 64-bitSolaris 8,Solaris9,Solaris10Suse Linux ES 10 32-bit,Suse Linux ES 10 64-bitSuse Linux ES 9 32-bit,Suse Linux ES 9 64-bitWindows 2000 for HPsystemsWindows 2000,Windows2003-32bitWindows 2003 64-bitWindows 2008 32-bit,Windows 2008 64-bitLinux Red Hat AS 3.0 32-bitLinux Red Hat AS 4.0 32-bit8.0.16.44, 8.0.16.472.00a12, 2.10a7, 2.20.006, 2.30.0162.10a7, 2.20.006, 2.30.0167.1.14, 7.3.68.0.6.278.0.16.408.2.0.22, 8.2.0.29 (LP9000 only),8.2.0.634.20K, 5.0i, 5.01e, 5.01e-1, 5.02b,5.03, 6.01c*, 6.01f(Solaris 8,9 only) ,6.02f, g, 6.10g, 6.11c, 6.21g, 6.30g8.2.0.29 (LP9000 only), 8.2.0.638.0.16.44, 8.0.16.475-4.82a95-4.82a14 (9002L only)5-1.10a4, 1.20a3,5-2.12a1, 5-2.13a4,2.20a12-2, 2.21a8, 2.22a8, 2.23a6,2.30a2, 2.40a2,2.41a1,2.42a0,5-4.53.a4,5-4.53.a5,5-4.53.a7(CompaqOnly) 5-4.82a4(SCSIport)5.10a10,5.31a0(STORport)1.11a3,1.20a3,1.20a7,1.30a6,1.30a9, 2.00a12 and 2.30.016(Windows 205.00a10/a11 (Miniport)6-1.10a4, 1.20a36-2.21a7, 6-2.21a8, 6-2.22a8(STORport) 1.11a3, 1.20a3, 1.20a7,1.30a6, 1.30a9, 2.00a12, 2.30.016STORport 2.01a4 (LP9000 only),2.30.0167.1.14, 7.3.68.0.6.27Linux Red Hat AS 4.0 64-bit8.0.16.4024

CommandCentral Storage - HBAsHBA Vendor Model OS Drivers Features Supported NotesLP8000DCLP8000SLP850Linux Red Hat AS 5.0 32-bit,Linux Red Hat AS 5.064-bitSolaris 8,Solaris9,Solaris10Suse Linux ES 9 32-bit,Suse Linux ES 9 64-bitWindows 2000,Windows2003- 32bitWindows 2003 64-bit 2.00a12Solaris 8,Solaris9,Solaris10Windows 2003 32-bit,Windows 2003 64-bit8.2.0.22, 8.2.0.296.01f(Solaris 8,9 only) , 6.02f, g,6.10g, 6.11c, 6.21g, 6.30g8.0.16.44, 8.0.16.475-1.10a4, 1.20a3 5-2.12a1, 5-2.13a42.20a12-2, 2.21a8, 2.22a8, 2.23a6,2.30a2, 2.40a2, 2.41a1, 2.42a0 5-4.53.a4, 5-4.53.a5 5-4.53.a7(Compaq Only) 5-4.82a4 (SCSIport)5.10a10, 5.31a0 (STORport) 1.11a3,1.20a3, 1.20a7, 1.30a6, 1.30a9,2.00a12(Windows 20034.20K, 5.0i, 5.01e, 5.01e-1, 5.02b,5.03, 6.01c*, 6.01f(Solaris 8,9 only) ,6.02f, g, 6.10g, 6.11c, 6.21g, 6.30g2.00a12LP9000 2.01a4, 2.10a7, 2.20.006LP9002C, LP9002S,LP9002DC, LP9002LLP9402/DC, LP9402Windows 2008 32-bit,Windows 2008 64-bitSolaris 8,9 6.01fLinux Red Hat AS 3.0 32-bitLinux Red Hat AS 4.0 32-bitLinux Red Hat AS 4.0 64-bitLinux Red Hat AS 5.0 32-bit,Linux Red Hat AS 5.064-bitSolaris 8,Solaris9,Solaris10Windows 2000,Windows2003-32bit7.1.14, 7.3.68.0.6.278.0.16.408.2.0.63, 8.2.0.29, 8.2.0.225.01e, 5.01e-1, 5.02b, 5.03 6.01c*,6.01f(Solaris 8,9 only) , 6.02f, g,6.10g, 6.11c5-1.10a4, 1.20a32.23a6, 2.30a2, 2.40a2, 2.41a1,2.42a05-4.82a4(SCSIport) 5.10a10, 5.31a0(STORport) 1.11a3, 1.20a3, 1.20a7,1.30a6, 1.30a9, 2.01a4, 2.30.016FDMI Supported only with newerversion of drivers.CommandCentral automatically discovers these HBAs and their physical connections to the SAN, as wellas model, driver, firmware, OS version and OS handles.Please check the Emulex website for the latest firmware.The 2.12A1 device driver supporting CT Passthru is limited in the size of a McDATA Zone they cansupport (about 32 to 64 ports).For 4.53.Ax, CT Passthru will not work with any driver in this family.Emulex (Windows 2000) drivers support FDMI from versions 5-5.01 a0-01 (port driver) and 5-2.20a12-2(miniport drivers) and onwards. Please refer to the Emulex website for information on configuring FDMIand for the Hardware Compatibility List for FDMI.* With Solaris driver version 6.01c and Linux driver version 2.01g, CT Passthru may fail with the defaultsettings for the HBA.This problem can be worked around by setting the "lpfc_fdmi_on" parameter to 1 in the lpfc.conf file. Thisissue will be fixed in a later version of the driver.Note: HBA monitoring and HBA-port status monitoring is not supported.Windows 2003-64bit6-1.10a4, 1.20a3(STORport) 1.11a3, 1.20a3, 1.20a7,1.30a6, 1.30a9, 2.01a4, 2.30.01625

CommandCentral Storage - HBAsHBA Vendor Model OS Drivers Features Supported NotesLP952L, LP982LP9802DC, LP9802LPe11002, LPe11000,LPe11000, LPe1150,LP1150-E, LPe1150-E,LP11002, LP11000,LP1150,LP1005DCCM2, LLPe12000, LPe12002Windows 2008 32-bit,Windows 2008 64-bitLinux Red Hat AS 3.0 32-bitLinux Red Hat AS 4.0 32-bitLinux Red Hat AS 4.0 64-bitLinux Red Hat AS 5.0 32-bit,Linux Red Hat AS 5.064-bitWindows 2000,Windows2003-32bitWindows 2003-64bitLinux Red Hat AS 3.0 32-bitLinux Red Hat AS 4.0 32-bitLinux Red Hat AS 4.0 64-bitLinux Red Hat AS 5.0 32-bit,Linux Red Hat AS 5.064-bitSolaris 8,Solaris9,Solaris10Windows 2003-64bitWindows 2008 32-bit,Windows 2008 64-bitWindows 2003 32-bit,Windows 2003 64-bitWindows 2008 32-bitSTORport 2.01a4, 2.30.0167.1.14, 7.3.68.0.6.278.0.16.408.2.0.22, 8.2.0.295-1.10a4, 1.20a35-2.13a42.20a12-2, 2.21a8, 2.22a8, 2.23a6,2.30a2, 2.40a2, 2.41a1, 2.42a05-4.82a4(SCSIport) 5.10a10, 5.31a0(STORport) 1.11a3, 1.20a3, 1.20a7,1.30a6, 1.30a9,2.01a46-1.10a4, 1.20a36-2.21a7, 6-2.21a8, 6-2.22a8(STORport) 1.11a3, 1.20a3, 1.20a7,1.30a6, 1.30a9, 2.01a47.1.14, 7.3.68.0.6.278.0.16.408.2.0.22, 8.2.0.295.0i, 5.01e, 5.01e-1, 5.02b, 5.03,6.01c*, 6.01f(Solaris 8,9 only) , 6.02f,g, 6.10g, 6.11c, 6.21g, 6.30g6-1.10a4, 1.20a36-2.21a7, 6-2.21a8, 6-2.22a8(STORport) 1.11a3, 1.20a3, 1.20a7,1.30a6, 1.30a9, 2.01a4, 2.30.016STORport 2.01a4, 2.30.0162.30.016Windows 2008 64-bit (STORport) 2.01a4, 2.30.016Linux Red Hat AS 4.0 64-bitLinux Red Hat AS 5.0 32-bit,Linux Red Hat AS 5.064-bitSolaris 8,Solaris9,Solaris10Suse Linux ES 10 32-bit,Suse Linux ES 10 64-bit8.0.16.40 (LPe12000 only)8.2.0.22, 8.2.0.29, 8.2.0.636.21g, 6.30g8.2.0.29, 8.2.0.6326

CommandCentral Storage - HBAsHBA Vendor Model OS Drivers Features Supported NotesLPe1250LP1050, LP1050DCSuse Linux ES 9 32-bit,Suse Linux ES 9 64-bitLinux Red Hat AS 5.0 32-bit,Linux Red Hat AS 5.064-bitSuse Linux ES 10 32-bit,Suse Linux ES 10 64-bitSuse Linux ES 9 32-bit,Suse Linux ES 9 64-bitWindows 2003-32bit,Windows 2003-64bit,Windows 2008 32-bit,Windows 2008 64-bitWindows 2000,Windows2003- 32bit8.0.16.44, 8.0.16.478.2.0.22, 8.2.0.29, 8.2.0.638.2.0.29, 8.2.0.638.0.16.44, 8.0.16.47STORport 2.01a4, 2.10a7, 2.20.006,2.30.0165-1.10a4, 1.20a35-2.21a7, 5-2.22a8, 5-2.23a62.30a2, 2.30.016, 2.40a2, 2.41a1,2.42a0(SCSIport) 5.10a10, 5.31a0(STORport) 1.11a3, 1.20a3, 1.20a7,1.30a6, 1.30a9, 2.01a4, 2.32.002CommandCentral automatically discovers these HBAs and their physical connections to the SAN, as wellas model, driver, firmware, OS version and OS handles.LP952L, LP982Windows 2008 32-bit,Windows 2008 64-bitSTORport 2.01a4, 2.32.002Please check the Emulex website for the latest firmware.The 2.12A1 device driver supporting CT Passthru is limited in the size of a McDATA Zone they cansupport (about 32 to 64 ports).For 4.53.Ax, CT Passthru will not work with any driver in this family.Emulex (Windows 2000) drivers support FDMI from versions 5-5.01 a0-01 (port driver) and 5-2.20a12-2(miniport drivers) and onwards. Please refer to the Emulex website for information on configuring FDMIand for the Hardware Compatibility List for FDMI.* With Solaris driver version 6.01c and Linux driver version 2.01g, CT Passthru may fail with the defaultsettings for the HBA.This problem can be worked around by setting the "lpfc_fdmi_on" parameter to 1 in the lpfc.conf file. Thisissue will be fixed in a later version of the driver.Note: HBA monitoring and HBA-port status monitoring is not supported.LP9802DC, LP9802Windows 2000,Windows2003- 32bit5-1.10a4, 1.20a3 5-2.13a4 2.20a12-2, 2.21a8, 2.22a8, 2.23a6, 2.30a2,2.40a2, 2.41a1, 2.42a0 5-4.82a4(SCSIport) 5.10a10, 5.31a0(STORport) 1.11a3, 1.20a3, 1.20a7,1.30a6, 1.30a9, 2.01a4,2.30.016(Windows 2003 32-bit only),2.32.002LPe12000, LPe12002Windows 2003-32bit,Windows 2003-64bit,Windows 2008 32-bit,Windows 2008 64-bitSTORport 2.01a4, 2.20.006,2.30.016, 2.32.002HBAs are discovered if connected to switches with their WWNs, but have no host association. Anenclosure representing a host can be built around these HBAs to create a manually-configured hostassociation.GenericDAS support for IDE on Solaris and WindowsSMI-S 1.1 support is added for CTP complaint vendors (Does not support Linux SMI-S).AIX, HP-UX, Linux do not require HBA API installation but Solaris and Windows require it.IDE disk discovery on Solaris, Linux and Windows.Note: HBA monitoring and HBA-port status monitoring is not supported.27

CommandCentral Storage - HBAsHBA Vendor Model OS Drivers Features Supported NotesHPIBMA6795AA5158AAB379AAB378AA6826AAB379AAB378AA6826AAD194AHP-UX 11.0bHP-UX 11i v1HP-UX 11i v2HP-UX 11i v3 (PA-RISC &IA)HP-UX 11i v1HP-UX 11i v25716 AIX 5.35758 AIX 5.35759 AIX 5.3HP-UX 11i v3 (PA-RISC &IA)11.00.10 (with HP patchPHSS_26798)11.11.1911.11.09 (with HP patchPHSS_26799)11.23.090911.23.080911.23.080311.23.070911.23.0111.31.1003 (A6795A only)11.31.0909 (A6795A only)11.31.0811 (A6795A only)11.11.1611.11.03* (A6826A only)11.23.100311.23.090911.23.090311.23.080311.23.08.0211.31.100311.31.0909 (A6826A only)11.31.0809 (A6826A only)AIX 5.2 devices.pci.df1000fa.rte 5.2.0.75devices.pci.df1000fa.rte 5.3.0.10,devices.pci.df1000fa.rte 5.3.0.30,devices.pci.df1000fa.rte.5.3.9.0AIX 6.1 devices.pci.df1000fa.rte 6.1.2.0devices.pci.df1000fd.rte 5.3.0.60,devices.pci.df1000fd.rte 5.3.8.0,devices.pci.df1000fd.rte.5.3.9.0AIX 6.1 devices.pci.df1000fd.rte 6.1.2.0devices.pci.df1000fd.rte 5.3.0.60,devices.pci.df1000fd.rte 5.3.8.0,devices.pci.df1000fd.rte.5.3.9.05773 devices.pciex.df1000fe.rte 5.3.9.0AIX 6.1 devices.pciex.df1000fe 6.1.2.05774 AIX 5.3 devices.pciex.df1000fe.rte 5.3.9.0AIX 6.1 devices.pciex.df1000fe 6.1.2.06227 devices.pci.df1000f7.rte 5.2.0.756228 AIX 5.2 devices.pci.df1000f9.rte 5.2.0.756239 AIX 5.3devices.pci.df1080f9.rte 5.2.0.75devices.pci.df1080f9.rte 5.3.0.10,devices.pci.df1080f9.rte 5.3.0.30,devices.pci.df1080f9.rte.5.3.9.0AIX 6.1 devices.pci.df1080f9.rte 6.1.2.0CommandCentral Storage automatically discovers these HBAs and their physical connections to the SAN,as well as model, driver, firmware, OS version and OS handles.Max CT size limitation is 64 ports on a McData switch.RSCN changes are only noted after IOSCAN issued (next SAL exploration).* The 11.11.03 driver does not support in-band fabric discovery. Discovery of the fabric will need to beestablished out of band.Note: HBA monitoring and HBA-port status monitoring is not supported.CommandCentral Storage automatically discovers these HBAs and their physical connections to the SAN,as well as model, driver, firmware, OS version and OS handles.Note: HBA monitoring and HBA-port status monitoring is not supported.28

CommandCentral Storage - HBAsHBA Vendor Model OS Drivers Features Supported NotesJNI(AMCC)FCI-1063, FC64-1063FCE-6410, FCE2-6412,FCE-1063, FCE2-1063FCE-6460, FCE-1473Solaris2.5.9 (HDS)2.5.9.03 (Compaq)2.5.9.18, 2.5.9.212.6.9, 2.6.10, 2.6.11, 2.6.12, 2.6.134.1, 4.1.1, 4.1.1.14.13 (Solaris 9)4.15 (Solaris 8)4.165.1.15.2.15.3FCX-6562, FCX2-6562 5.2.1, 5.3CommandCentral Storage automatically discovers these HBAs and their physical connections to the SAN,as well as model, driver,firmware, OS version and OS handles.The 2.5.x drivers do not support CT Passthru.For 2.6.9, there are circumstances where this driver may cause a system panic when handling CTPassthru requests.Note: HBA monitoring and HBA-port status monitoring is not supported.CommandCentral Storage automatically discovers these HBAs and their physical connections to the SAN,as well as model, driver,firmware, OS version and OS handles.There is a 2K CT Packet limitation with the 4.1.x and 5.1.1 drivers which could limit the amount of zoninginformation discovered.The 4.1.x drivers are not compatible with Brocade Silkworm 12000 and 3900 running firmware versionsv4.1.0 and v4.1.1.CommandCentral Storage can perform in-band discovery of JNI dual HBA ports only when the installedSNIA library version is v2.0.03717-16 or higherNote: HBA monitoring and HBA-port status monitoring is not supported.29

CommandCentral Storage - HBAsHBA Vendor Model OS Drivers Features Supported NotesQLogicQLA 2200F QLA 2202FQLA 2202FSQLA 2300, QLA 2310,QLA 2340, QLA 2342,QLA 2344Linux Red Hat AS 3.0 32-bitLinux Red Hat AS 4.0 32-bitSolarisWindows 2000,Windows2003- 32bitSolaris SbusLinux Red Hat AS 3.0 32bitLinux Red Hat AS 4.0 32-bitLinux Red Hat AS 4.0 64-bit,Linux Red Hat AS 5.032-bit,Linux Red Hat AS5.0 64-bitSolarisSuse Linux ES 9 32-bit,Suse Linux ES 9 64-bit,Suse Linux ES 10 32-bit,Suse Linux ES 10 64-bitWindows 2000,Windows2003- 32bitWindows 2003-64bitWindows 2008 32-bit,Windows 2008 64-bitLinux Red Hat AS 3.0 32-bitLinux Red Hat AS 4.0 32-bitLinux Red Hat AS 4.0 64-bit,Linux Red Hat AS 5.032-bit,Linux Red Hat AS5.0 64-bit7.03.008.01.06, 8.01.07-fo, 8.01.04-d73.16, 3.26,4.03, 4.07, 4.09,4.13, 4.13.01, 4.178.1.38.1.5.10, 8.1.5.12, 8.1.5.15, 8.1.5.208.1.5.62, 8.1.5.633.16, 3.26,4.03, 4.07, 4.09,4.13, 4.13.01, 4.177.00.03 7.03.00, 7.07.058.01.06, 8.01.07-fo, 8.01.04-d78.02.143.16, 3.26, 4.03, 4.07, 4.09, 4.13,4.13.01, 4.17 5.01*, 5.038.02.148.1.3 8.1.5.10, 8.1.5.12, 8.1.5.208.1.5.62, 8.1.5.63, 8.2.3.63 9.0.0.12,9.0.0.13 9.0.1.10, 9.0.1.12, 9.0.2.16,9.0.2.17 9.1.0.10, 9.1.2.11, 9.1.4.10(STORport) 9.1.2.14, 9.1.2.16,9.1.2.19, 9.1.4.15, 9.1.7.16(Windows2003 -32 bit QLA 2340 only), 9.1.7.18.2.3.63 9.1.2.16, 9.1.7.16(QLA 2340only), 9.1.7.18Storport Miniport Driver 9.1.7.16,9.1.7.187.07.058.01.06, 8.01.07-fo, 8.01.04-d78.03.00.09 (RHEL 5 only), 8.02.14QLogic drivers support FDMI fromversion 4.13 (Solaris) onwards. Pleaserefer to the QLogic website forinformation on configuring FDMI and forthe Hardware Compatibility list forFDMI.Linux:StorageExplorer:discovering bothsg and sd device for same lun withdifferent attributes, requires a SAH HF2 or aboveCommandCentral Storage automatically discovers these HBAs and their physical connections to the SAN,as well as model, driver, firmware,OS version and OS handles.For 3.16, 3.26, 4.03, 4.07, 4.09, there are circumstances where this driver may cause a system panicwhen handling CT Passthru requests.For the 8.1.3 driver, there is a 2K CT packet limitation which could limit the amount of zoning informationdiscovered.For the 8.2.3.63 driver, there is a 24K CT packet limitation which could limit the amount of zoninginformation discovered.The 4.13 and 4.13.01 Solaris drivers are not compatible with Brocade Silkworm 12000 and 3900 runningfirmware versions v4.1.0 and v4.1.1.*5.01 driver for Solaris does not support the QLA2300.Note: HBA monitoring and HBA-port status monitoring is not supported.QLA24XX QLE24XX Solaris 5.01, 5.0330

CommandCentral Storage - HBAsHBA Vendor Model OS Drivers Features Supported NotesSunQLE 2362QLE 2560, QLE 2562,QLE 2462SG-XPCI1FC-EM2 , SunSG-XPCI2FC-EM2SG-XPCI1FC-QF2, SG-XPCI2FC-QF2, SG-XPCI1FC-QF4, SG-XPCI2FC-QF4Suse Linux ES 9 32-bit,Suse Linux ES 9 64-bit,Suse Linux ES 10 32-bit,Suse Linux ES 10 64-bitWindows 2000,Windows2003-32bit8.03.00.08(Suse 10 only), 8.02.149.1.0.10, 9.1.2.11, 9.1.4.10(STORport) 9.1.2.14, 9.1.2.16,9.1.2.19, 9.1.4.15, 9.1.7.18,9.1.8.25(Windows 2003 only)Windows 2003-64bit 9.1.2.16, 9.1.7.18, 9.1.8.25Windows 2008 32-bit,Windows 2008 64-bitWindows 2003 32-bit,Windows 2003 64-bit,Windows 2008 32-bit,Windows 2008 64-bitSolarisSuse Linux ES 10 32-bit,Suse Linux ES 10 64-bit,Suse Linux ES 9 64-bit,Linux Red Hat AS 5.0 32-bit, Linux Red Hat AS 5.064-bitWindows 2003-32bit,Windows 2003-64bit,Windows 2008 32-bit,Windows 2008 64-bitStorport Miniport Driver 9.1.7.16,9.1.7.18, 9.1.8.259.1.7.18v5.05 (QLE 2560, QLE 2562 only)8.03.00.09(RHEL 5 only)8.03.00.08 (Suse 10 only)8.02.23 (QLE 2560, QLE 2562 only)9.1.7.16, 9.1.8.17 (QLE 2462, QLE2562 only), 9.1.18.16, 9.1.7.18,9.1.8.25Solaris 10 Driver patch 141876-06 Solaris 10 update 6 is required.Driver Patch 142084-03StorEdge X 6767 A orSG-XPCI1FC-QF2 X6768 A or SG-XPCI1FC-QF2, SG-XPCI2FC-QSolaris 8,9,10* 4.3.x, 4.4.6, 4.4.8, 4.4.11, 4.4.15DiscoveryMulti-Zone Set ZoningPort Enable/DisableSUNWsan v4.4.1 requires a patch from Sun to fix Bug ID #5095557: Patch ID #113767-07 (Solaris 8) or114478-06 (Solaris 9).# Solaris 10 equivalence of 4.4.12 is kernel level Generic_118833-36SUN driver patch 125166-13 has been replaced by SUN with patch rev 139606-02SUN Leadville driver Patch 120223 patch family has been replaced by SUN with patch 139608-03SUN Leadville driver 4.4.9 is not supported. Installation of CommandCentral MH on a system having thisdriver version can cause undesired results.*Solaris 10 supportSunOS 5.10: Sun Fibre Channel Device Drivers Patch 119130-09 or later must be installed on the Solaris10 for Leadville to work properly.Note: SunOS 5.10 Generic_118822-19 kernel patch level includes the 119130-09 patch.HBA monitoring and HBA-port status monitoring is not supported.31

CommandCentral Storage - Miscellaneous DevicesmisDevice Type Vendor Model Firmware Monitoring Alerting NotesDWDMInRange Spectrum 2000 SupportedADVA FST 2000iSCSI Router Cisco 5420 Not SupportedMulti-Protocol Router Brocade AP7420 7.3.0c, 7.4.x Not SupportedTape/ Tape ArrayL-Series(L20/40/80/180/700e/5500)STK Powderhorn (9310)Timberwolf(9710/9714/9730/9740)Symantec does not specifically certifyLibrary firmware for ACSLS controllerlibraries. Symantec certifies usage ofthese ACSLS controlled STK librariesNot Supportedvia the ACSLS server only. ACSLSshould be version 7.0 or greater.CommandCentral Storage discovers tape devices which are attached to a SAN and hence visible to themanaged host through a supported HBA/driver.A SCSI tape library may be attached to the SAN through an FC-SCSI bridge for this purpose.For list of supported HBAs/drivers refer to the CommandCentral HBAs section of this document.For other tape enclosures, you can identify or create enclosures for tape devices through the enclosurewizard.For a complete list of supported devices please refer to the VERITAS NetBackup DataCenter v4.5 orEnterprise Server v5.0/v5.1 Device Compatibility List available on the Symantec Support website (see linkon page 1).32

CommandCentral Storage - SoftwaresofVendorEMCHPIBMApplication Software Version Supported OS Application Correlation Cluster Support Monitoring AlertingPowerpath3.0.6 Windows 2003-32bit, Solaris 9, Solaris 8, Linux (AS/ES) 3.0, Windows 2000 Supported4.2 Solaris 9, Solaris 8, Linux (AS/ES) 3.0 Supported4.3 Solaris 9, Linux (AS/ES) 3.0, Windows 2003-32bit, Windows 2003-64bit, Windows 2000, Solaris 8 Supported4.3.1 Linux (AS/ES) 3.0, Windows 2003-64bit, Windows 2000, Solaris 8, Windows 2003-32bit, Solaris 9 Supported4.44.5Windows 2003-32bit, Linux (AS/ES) 4.0 64-bit, Solaris 8, Linux (AS/ES) 5.0 32-bit, Windows 2000, Linux (AS/ES) 4.032-bit, Solaris 10, Linux (AS/ES) 5.0 64-bit, Windows 2003-64bit, Solaris 9Windows 2000, Linux (AS/ES) 4.0 64-bit, Solaris 8, Linux (AS/ES) 4.0 32-bit, Solaris 10, Windows 2003-64bit, Solaris9, Windows 2003-32bit, Linux (AS/ES) 5.0 32-bit, Linux (AS/ES) 5.0 64-bitSupportedSupported4.6 Windows 2003-64bit, Windows 2000, Windows 2003-32bit, Windows 2003-64bit Supported5.0 Linux (AS/ES) 4.0 64-bit, Linux (AS/ES) 5.0 32-bit, Linux (AS/ES) 5.0 64-bit, Linux (AS/ES) 4.0 32-bit Supported5.1 Linux Red Hat ES 4.0 32-bit, Linux Red Hat ES 4.0 64-bit5.2 Windows 2008 64-bit, Windows 2008 32-bit, Solaris 10 Supported5.3 Suse Linux ES 10 32-bit, Suse Linux ES 10 64-bit Supported5.3.1.2 Linux Red Hat ES 4.0 32-bit, Linux Red Hat ES 4.0 64-bitHP HFS HP-UX 11i v1, HP-UX 11i v2, HP-UX 11i v3 (PA-RISC & IA) Supported SupportedHP LVM HP-UX 11i v2, HP-UX 11i v1 Supported SupportedHP Secure Path 4.0C Windows 2000, Windows 2003-32bit Not Supported N/A Not SupportedAIX JFS AIX 5.2, AIX 6.1, AIX 5.3 Supported N/A SupportedDB2(EE, EEE, ESE)7.2 Solaris 9, AIX 5.2, Solaris 8, Solaris 10, AIX 5.3 Supported8.18.29.59.7Linux (AS/ES) 4.0 64-bit, Linux (AS/ES) 5.0 64-bit, Linux (AS/ES) 5.0 32-bit, Linux (AS/ES) 4.0 32-bit, Suse Linux ES10 64-bit, Suse Linux ES 10 32-bit, Suse Linux ES 9 64-bit, Suse Linux ES 9 32-bit, AIX 5.3, Linux Red Hat AS 3.0 32-bit, Solaris 8, Solaris 9, AIX 6.1, Solaris 10, AIX 5.2AIX 5.3, Linux (AS/ES) 4.0 64-bit, Linux (AS/ES) 5.0 64-bit, Linux (AS/ES) 5.0 32-bit, Linux Red Hat AS 3.0 32-bit,Linux (AS/ES) 4.0 32-bit, Solaris 10, Suse Linux ES 10 32-bit, Suse Linux ES 9 64-bit, Suse Linux ES 9 32-bit, Solaris9, Suse Linux ES 10 64-bit, AIX 5.2, Solaris 8, AIX 6.1Linux (AS/ES) 4.0 64-bit, Linux (AS/ES) 5.0 64-bit, Linux (AS/ES) 5.0 32-bit, Linux Red Hat AS 3.0 32-bit, Linux(AS/ES) 4.0 32-bit, Suse Linux ES 10 32-bit, Suse Linux ES 9 64-bit, Suse Linux ES 9 32-bit, Suse Linux ES 10 64-bit, Solaris 9, Solaris 10, AIX 5.3, AIX 6.1Solaris 10, AIX 6.1, Linux (AS/ES) 5.0 64-bit, AIX 5.3, Suse Linux ES 9 32-bit, Suse Linux ES 9 64-bit, Suse Linux ES10 32-bit, Suse Linux ES 10 64-bit, Linux (AS/ES) 4.0 32-bit, Linux Red Hat AS 3.0 32-bit, Linux (AS/ES) 5.0 32-bit,Solaris 9, Linux (AS/ES) 4.0 64-bitAIX LVM AIX 5.3, AIX 5.2, AIX 6.1 Supported Supported Not SupportedAIX JFS2 AIX 5.2, AIX 5.3, AIX 6.1 Supported N/A SupportedSupportedSupportedSupportedSupportedN/ASupportedSupportedSupported33

CommandCentral Storage - SoftwareVendorMicrosoftOracleApplication Software Version Supported OS Application Correlation Cluster Support Monitoring AlertingNTFS Windows 2000, Windows 2008 64-bit, Windows 2008 32-bit, Windows 2003-64bit, Windows 2003-32bit Supported N/A SupportedLDM Windows 2008 32-bit, Windows 2003-64bit, Windows 2003-32bit, Windows 2000, Windows 2008 64-bit Supported N/A Not SupportedCluster ServerExchangeSQL Server2000 Windows 2000 Supported2003 Windows 2008 64-bit, Windows 2003-32bit, Windows 2008 32-bit, Windows 2003-64bit Supported2008 Windows 2008 64-bit, Windows 2008 32-bit Supported2000 Windows 2000 Supported2003 Windows 2000, Windows 2003-32bit Supported2007 Windows 2003-64bit, Windows 2008 64-bit Supported2000 Windows 2003-32bit, Windows 2000, Windows 2003-64bit Supported2005 Windows 2000, Windows 2008 64-bit, Windows 2003-32bit, Windows 2003-64bit, Windows 2008 32-bit Supported2008 Windows 2003-32bit, Windows 2008 32-bit, Windows 2003-64bit, Windows 2008 64-bit SupportedMPIO Windows 2003-32bit N/A N/A N/AHBAAPIWindows 2003 32-Bit SP2+, Windows 2008 32-bit, Windows 2000 SP4+, Windows 2003 64-Bit SP2+, Windows 200864-bitN/ASupportedSupportedSupportedSupportedSupportedN/A N/A N/AOPS 8i HP-UX 11i v1, HP-UX 11i v3 (PA-RISC & IA), Solaris 9, AIX 5.2, Solaris 8, AIX 5.3, HP-UX 11i v2, AIX 6.1 Supported Supported SupportedRACOracle DBASM10g11g11g R29i10g11g11g R28i9i10g11g11g R2HP-UX 11i v3 (PA-RISC & IA), Suse Linux ES 10 32-bit, Linux Red Hat AS 3.0 32-bit, AIX 5.2, Solaris 9, HP-UX 11iv2, Solaris 10, HP-UX 11i v1, Suse Linux ES 10 64-bit, Linux Red Hat AS 4.0 64-bit, AIX 5.3, Solaris 8, Linux Red HatAS 4.0 32-bit, Linux Red Hat AS 5.0 32-bit, Linux Red Hat AS 5.0 64-bit, Suse Linux ES 9 32-bit, Suse Linux ES 9 64-bitLinux Red Hat AS 4.0 32-bit, HP-UX 11i v1, Linux Red Hat AS 5.0 32-bit, Linux Red Hat AS 5.0 64-bit, Solaris 9, SuseLinux ES 9 32-bit, Solaris 8, Suse Linux ES 9 64-bit, AIX 5.3, HP-UX 11i v3 (PA-RISC & IA), Linux Red Hat AS 3.0 32-bit, AIX 5.2, HP-UX 11i v2, Solaris 10, Suse Linux ES 10 64-bit, Linux Red Hat AS 4.0 64-bit, Suse Linux ES 10 32-bitSolaris 10, HP-UX 11i v2, AIX 5.2, Linux Red Hat AS 3.0 32-bit, Linux Red Hat AS 4.0 64-bit, Solaris 8, Solaris 9, HP-UX 11i v1, HP-UX 11i v3 (PA-RISC & IA), AIX 5.3, Linux Red Hat AS 4.0 32-bit, Linux Red Hat AS 5.0 32-bit, LinuxRed Hat AS 5.0 64-bit, Suse Linux ES 9 32-bit, Suse Linux ES 9 64-bit, Suse Linux ES 10 64-bit, Suse Linux ES 1032-bitSuse Linux ES 10 64-bit, Suse Linux ES 10 32-bit, Suse Linux ES 9 64-bit, Suse Linux ES 9 32-bit, Linux Red Hat AS5.0 64-bit, Linux Red Hat AS 5.0 32-bit, Linux Red Hat AS 4.0 32-bit, AIX 5.3, HP-UX 11i v3 (PA-RISC & IA), HP-UX11i v1, Solaris 9, Solaris 8, Linux Red Hat AS 4.0 64-bit, Linux Red Hat AS 3.0 32-bit, AIX 5.2, HP-UX 11i v2, Solaris10AIX 5.3, Linux Red Hat AS 4.0 64-bit, Linux Red Hat AS 4.0 32-bit, Linux Red Hat AS 3.0 32-bit, Suse Linux ES 9 32-bit, AIX 5.2, HP-UX 11i v3 (PA-RISC & IA), HP-UX 11i v2, HP-UX 11i v1, Solaris 10, Solaris 9, Solaris 8, Suse LinuxES 9 64-bit, Suse Linux ES 10 32-bit, Suse Linux ES 10 64-bit, AIX 6.1, Linux Red Hat AS 5.0 32-bit, Linux Red HatAS 5.0 64-bitSuse Linux ES 10 64-bit, Linux Red Hat AS 4.0 32-bit, Suse Linux ES 10 32-bit, Solaris 8, Solaris 9, Solaris 10, HP-UX 11i v2, Linux Red Hat AS 3.0 32-bit, AIX 6.1, HP-UX 11i v1, Linux Red Hat AS 5.0 32-bit, Linux Red Hat AS 4.0 64-bit, Linux Red Hat AS 5.0 64-bit, Suse Linux ES 9 64-bit, Suse Linux ES 9 32-bitSolaris 9, Solaris 10, HP-UX 11i v2, AIX 6.1, HP-UX 11i v1, Linux Red Hat AS 3.0 32-bit, Linux Red Hat AS 4.0 64-bit,Linux Red Hat AS 5.0 64-bit, Suse Linux ES 9 64-bit, Suse Linux ES 10 64-bit, Linux Red Hat AS 4.0 32-bit, LinuxRed Hat AS 5.0 32-bit, Solaris 8, Suse Linux ES 10 32-bit, Suse Linux ES 9 32-bitSolaris 9, HP-UX 11i v2, AIX 5.2, Linux Red Hat AS 3.0 32-bit, Linux Red Hat AS 4.0 64-bit, Linux Red Hat AS 5.0 64-bit, Suse Linux ES 9 64-bit, Suse Linux ES 10 32-bit, Suse Linux ES 10 64-bit, Suse Linux ES 9 32-bit, Linux Red HatAS 5.0 32-bit, Linux Red Hat AS 4.0 32-bit, AIX 5.3, HP-UX 11i v3 (PA-RISC & IA), HP-UX 11i v1, Solaris 8Solaris 9, HP-UX 11i v1, HP-UX 11i v3 (PA-RISC & IA), AIX 5.3, Suse Linux ES 10 32-bit, Linux Red Hat AS 5.0 32-bit, Suse Linux ES 9 32-bit, Suse Linux ES 9 64-bit, Suse Linux ES 10 64-bit, AIX 6.1, Solaris 8, Solaris 10, HP-UX 11iv2, AIX 5.2, Linux Red Hat AS 3.0 32-bit, Linux Red Hat AS 4.0 64-bit, Linux Red Hat AS 4.0 32-bit, Linux Red Hat AS5.0 64-bitSolaris 8, Solaris 9, HP-UX 11i v2, Solaris 10, AIX 5.2, HP-UX 11i v1, AIX 5.3, AIX 6.1, Linux Red Hat AS 5.0 64-bit,Linux Red Hat AS 4.0 32-bit, Linux Red Hat AS 5.0 32-bit, Linux Red Hat AS 4.0 64-bitHP-UX 11i v2, HP-UX 11i v1, Linux Red Hat AS 5.0 64-bit, Linux Red Hat AS 5.0 32-bit, Linux Red Hat AS 4.0 32-bit,AIX 6.1, AIX 5.3, AIX 5.2, Solaris 10, Solaris 9, Solaris 8, Linux Red Hat AS 4.0 64-bitHP-UX 11i v1, Solaris 8, Solaris 9, Solaris 10, AIX 5.2, AIX 5.3, AIX 6.1, Linux Red Hat AS 4.0 32-bit, Linux Red HatAS 4.0 64-bit, Linux Red Hat AS 5.0 32-bit, Linux Red Hat AS 5.0 64-bit, HP-UX 11i v2SupportedSupportedSupportedSupportedSupportedSupportedSupportedSupportedSupportedSupportedSupportedSupportedSupportedSupportedNot SupportedSupportedSupportedNot Supported34

CommandCentral Storage - SoftwareVendorRedhatSunSybaseApplication Software Version Supported OS Application Correlation Cluster Support Monitoring AlertingEXT2EXT3Linux LVMSolstice Disk Suite /Solaris VMLinux (AS/ES) 4.0 32-bit, Linux (AS/ES) 3.0, Linux (AS/ES) 5.0 64-bit, Linux (AS/ES) 5.0 32-bit, Linux (AS/ES) 4.0 64-bitLinux (AS/ES) 4.0 64-bit, Linux (AS/ES) 5.0 64-bit, Linux (AS/ES) 3.0, Linux (AS/ES) 4.0 32-bit, Linux (AS/ES) 5.0 32-bitLinux (AS/ES) 4.0 32-bit, Linux (AS/ES) 5.0 32-bit, Linux (AS/ES) 5.0 64-bit, Linux (AS/ES) 4.0 64-bit, Suse Linux ES10 32-bit, Suse Linux ES 10 64-bitSolaris 8, Solaris 9, Solaris 10Supported N/A SupportedSupported N/A SupportedSupported N/A Not SupportedSupported N/A Not SupportedZFS Solaris 10(update 4 onwards) N/A Not SupportedSolaris UFS Solaris 9, Solaris 8, Solaris 10 Supported N/A SupportedZones Solaris 10 (update 3 onwards) N/A N/AASE11.9.3 Solaris 9, Solaris 10, Solaris 8 Supported12.0 Solaris 9 Supported12.5.1 Solaris 9, Solaris 8 Supported12.5.2 Solaris 8, Solaris 9, Solaris 10 Supported12.5.3 Solaris 9, Solaris 10, Solaris 8 Supported12.5.4 Solaris 10, Solaris 8, Solaris 9 Supported15.0 Solaris 9, Solaris 10, Solaris 8 Supported15.0.2 Solaris 9, Solaris 8, Solaris 10 SupportedSupportedSupported35

CommandCentral Storage - SoftwareVendorSymantecApplication Software Version Supported OS Application Correlation Cluster Support Monitoring AlertingCluster ServerNetBackupStorage Foundationfor Windows3.5 Solaris 9, HP-UX 11i v2, AIX 5.2, Solaris 8, HP-UX 11i v1, HP-UX 11i v3 (PA-RISC & IA), AIX 5.3 Supported4.0 AIX 5.3, Linux (AS/ES) 3.0, Solaris 9, Solaris 8, AIX 5.2 Supported4.1Suse Linux ES 10 64-bit, Suse Linux ES 9 64-bit, Linux Red Hat AS 5.0 32-bit, Suse Linux ES 9 32-bit, Suse Linux ES10 32-bit, Linux Red Hat AS 5.0 64-bit, Linux Red Hat AS 4.0 64-bit, HP-UX 11i v2, Windows 2003-64bit, Windows2000, Solaris 9, Linux Red Hat AS 4.0 32-bit, HP-UX 11i v3 (PA-RISC & IA), HP-UX 11i v1, Windows 2003-32bit,Solaris 10, Solaris 8, Linux Red Hat AS 3.0 32-bitSupported4.3 Windows 2003-32bit, Windows 2003-64bit, Windows 2000 Supported5.05.1Solaris 9, Windows 2000, Windows 2003-64bit, HP-UX 11i v2, AIX 6.1, Solaris 8, Linux Red Hat AS 5.0 64-bit, LinuxRed Hat AS 4.0 64-bit, AIX 5.2, HP-UX 11i v3 (PA-RISC & IA), HP-UX 11i v1, Windows 2003-32bit, Solaris 10, LinuxRed Hat AS 5.0 32-bit, Linux Red Hat AS 4.0 32-bit, AIX 5.3HP-UX 11i v3 (PA-RISC & IA), Linux Red Hat AS 4.0 32-bit, AIX 6.1, AIX 5.3, AIX 5.2, Linux Red Hat AS 5.0 32-bit,Linux Red Hat AS 4.0 64-bit, HP-UX 11i v2, Windows 2003-32bit, Solaris 8, HP-UX 11i v1, Solaris 9, Windows 200864-bit, Windows 2003-64bit, Linux Red Hat AS 5.0 64-bit, Windows 2008 32-bit, Solaris 10, Linux Red Hat AS 3.0 32-bit4.5 Linux (AS/ES) 4.0 32-bit, AIX 5.2, HP-UX 11i v1, Windows 2000, Solaris 9, Solaris 8, Linux (AS/ES) 3.0 N/A5.05.16.0Linux Red Hat AS 4.0 32-bit, HP-UX 11i v2, Windows 2003-32bit, Solaris 9, AIX 5.2, Solaris 8, Windows 2000, HP-UX11i v1, HP-UX 11i v3 (PA-RISC & IA), Linux Red Hat AS 3.0 32-bit, Linux Red Hat AS 4.0 64-bitLinux Red Hat AS 4.0 64-bit, Linux Red Hat AS 3.0 32-bit, Linux Red Hat AS 4.0 32-bit, HP-UX 11i v2, Windows 2003-32bit, Solaris 10, AIX 5.2, Solaris 9, Windows 2000, HP-UX 11i v1, HP-UX 11i v3 (PA-RISC & IA), AIX 5.3, Solaris 8Solaris 9, Windows 2000, HP-UX 11i v1, Linux Red Hat AS 4.0 32-bit, AIX 5.2, HP-UX 11i v3 (PA-RISC & IA), AIX 5.3,Linux Red Hat AS 4.0 64-bit, HP-UX 11i v2, Windows 2003-32bit, Solaris 10, Solaris 8Supported4.1 Windows 2000, Windows 2003-32bit Supported4.2 Windows 2000, Windows 2003-32bit Supported4.3 Windows 2000, Windows 2003-32bit, Windows 2003-64bit Supported5.0 Windows 2000, Windows 2003-32bit, Windows 2003-64bit Supported5.1 Windows 2003-64bit, Windows 2003-32bit, Windows 2008 32-bit, Windows 2008 64-bit Supported3.5 Solaris 8, Solaris 9, HP-UX 11i v2, HP-UX 11i v3 (PA-RISC & IA), HP-UX 11i v1 Supported4.0 Linux (AS/ES) 3.0, AIX 5.3, AIX 5.2, Solaris 9, Solaris 8 Supported4.15.0Suse Linux ES 10 32-bit, Suse Linux ES 9 32-bit, Linux Red Hat AS 5.0 32-bit, HP-UX 11i v2, Linux Red Hat AS 4.032-bit, Solaris 10, Solaris 8, Suse Linux ES 10 64-bit, Suse Linux ES 9 64-bit, Linux Red Hat AS 5.0 64-bit, Linux RedHat AS 4.0 64-bit, HP-UX 11i v3 (PA-RISC & IA), Solaris 9Linux (AS/ES) 5.0 64-bit, Linux (AS/ES) 4.0 32-bit, AIX 5.2, HP-UX 11i v1, Solaris 9, HP-UX 11i v2, Solaris 8, AIX 6.1,Linux (AS/ES) 4.0 64-bit, Linux (AS/ES) 5.0 32-bit, AIX 5.3, Solaris 10Solaris 10, HP-UX 11i v1, Linux (AS/ES) 4.0 32-bit, Solaris 9, HP-UX 11i v2, Linux (AS/ES) 4.0 64-bit, AIX 5.3, Linux(AS/ES) 5.0 32-bit, Solaris 8, AIX 5.2, AIX 6.1N/AN/AN/ASupportedSupportedN/AN/ASupportedNot SupportedSupportedStorage Foundationfor UnixSupportedSupported5.136

CommandCentral Storage - SoftwareVendorApplication Software Version Supported OS Application Correlation Cluster Support Monitoring AlertingCommandCentralStorageAgent/Managed HostWeb console BrowserSupportCommandCentralremote Install (From)CommandCentralPush Install Utility(From)CommandCentralStorage ManagementServer4.14.25.05.15.1.15.1.25.2Solaris 9, Windows 2003-32bit, HP-UX 11i v2, AIX 5.2, HP-UX 11i v3 (PA-RISC & IA), HP-UX 11i v1, Windows 2000,Solaris 8Linux Red Hat AS 5.0 64-bit, Linux Red Hat AS 5.0 32-bit, Linux Red Hat AS 4.0 32-bit, AIX 5.3, HP-UX 11i v3 (PA-RISC & IA), HP-UX 11i v1, Windows 2003-32bit, Solaris 10, Suse Linux ES 10 32-bit, Suse Linux ES 10 64-bit, SuseLinux ES 9 64-bit, Solaris 8, Linux Red Hat AS 4.0 64-bit, Linux Red Hat AS 3.0 32-bit, AIX 5.2, HP-UX 11i v2,Windows 2003-64bit, Windows 2000, Solaris 9, Suse Linux ES 9 32-bitHP-UX 11i v3 (PA-RISC & IA), HP-UX 11i v1, Solaris 9, AIX 5.3, Linux Red Hat AS 4.0 32-bit, Linux Red Hat AS 5.032-bit, Suse Linux ES 9 32-bit, Suse Linux ES 10 32-bit, AIX 6.1, HP-UX 11i v2, Windows 2000, Solaris 10, Solaris 8,Windows 2003-32bit, Suse Linux ES 10 64-bit, Suse Linux ES 9 64-bit, Linux Red Hat AS 5.0 64-bit, Linux Red HatAS 4.0 64-bit, Linux Red Hat AS 3.0 32-bit, AIX 5.2, Windows 2003-64bitAIX 5.3, Suse Linux ES 10 64-bit, Suse Linux ES 10 32-bit, Suse Linux ES 9 64-bit, HP-UX 11iv3, Linux Red Hat ES4.0 64-bit, Linux Red Hat AS 4.0 32-bit, Linux Red Hat ES 5.0 64-bit, Linux Red Hat ES 5.0 32-bit, VMware ESX *,Linux Red Hat AS 3.0 32-bit, Suse Linux ES 9 32-bit, Windows 2008 64-bit, HP-UX 11i v1, AIX 5.2, Linux Red Hat ES4.0 32-bit, Windows 2008 32-bit, Windows 2003-64bit, Windows 2003-32bit, Solaris 8, Windows 2000, Solaris 10,Solaris 9, HP-UX 11i v2, Linux Red Hat ES 3.0 32-bitWindows 2008 64-bit, Linux Red Hat ES 5.0 64-bit, Linux (AS/ES) 4.0 32-bit, Linux Red Hat ES 5.0 32-bit, Windows2008 32-bit, AIX 5.3, Windows 2003-32bit, Windows 2003-64bit, Linux (AS/ES) 3.0, HP-UX 11i v1, HP-UX 11i v2, AIX5.2, AIX 6.1, Solaris 8, HP-UX 11iv3, Solaris 10, Suse Linux ES 9 32-bit, Suse Linux ES 9 64-bit, Suse Linux ES 10 32-bit, Suse Linux ES 10 64-bit, Windows 2000, Solaris 9Linux (AS/ES) 4.0 32-bit, Suse Linux ES 10 32-bit, Linux Red Hat ES 5.0 64-bit, Windows 2008 32-bit, Linux Red HatES 5.0 32-bit, Windows 2008 64-bit, Windows 2003-64bit, Windows 2003-32bit, Windows 2000, Suse Linux ES 9 64-bit, Suse Linux ES 10 64-bit, Solaris 10, Solaris 9, Solaris 8, AIX 5.3, AIX 6.1, AIX 5.2, HP-UX 11iv3, HP-UX 11i v2,HP-UX 11i v1, Linux (AS/ES) 3.0, Suse Linux ES 9 32-bitLinux Red Hat ES 5.0 64-bit, Linux Red Hat ES 5.0 32-bit, Windows 2008 64-bit, Windows 2003-64bit, Windows 2003-32bit, Windows 2000, Suse Linux ES 10 64-bit, Suse Linux ES 10 32-bit, Suse Linux ES 9 64-bit, Suse Linux ES 9 32-bit, AIX 6.1, Solaris 9, Solaris 8, AIX 5.3, AIX 5.2, HP-UX 11iv3, HP-UX 11i v2, HP-UX 11i v1, Linux (AS/ES) 3.0,Windows 2008 32-bit, Solaris 10, Linux (AS/ES) 4.0 32-bitFF Windows 2000, Windows 2003-32bit, Windows 2003-64bit N/AIE Windows 2000, Windows 2003-32bit, Windows 2003-64bit N/AM Solaris 8, Solaris 9, Solaris 10 N/ASol 10 Solaris 9, Solaris 8, Solaris 10 N/ASol 8 Solaris 9, Solaris 10, Solaris 8 N/ASol 9 Solaris 8, Solaris 10, Solaris 9 N/AWin2k Windows 2000, Windows 2003-64bit, Windows 2003-32bit, Windows 2008 32-bit N/AAIX 5.2 AIX 5.2, AIX 5.3, AIX 6.1 N/AAIX 5.3 AIX 6.1, AIX 5.2, AIX 5.3 N/AHP-UX 11iv1 HP-UX 11i v1, HP-UX 11i v2 N/AHP-UX 11iv2 HP-UX 11i v1, HP-UX 11i v2 N/ARH AS/ES 3.0RH AS/ES 4.0Linux (AS/ES) 5.0 64-bit, Linux (AS/ES) 3.0, Linux (AS/ES) 4.0 32-bit, Linux (AS/ES) 4.0 64-bit, Linux (AS/ES) 5.0 32-bitLinux (AS/ES) 4.0 32-bit, Linux (AS/ES) 5.0 32-bit, Linux (AS/ES) 5.0 64-bit, Linux (AS/ES) 3.0, Linux (AS/ES) 4.0 64-bitSol 10 Solaris 8, Solaris 10, Solaris 9 N/ASol 8 Solaris 8, Solaris 10, Solaris 9 N/ASol 9 Solaris 10, Solaris 8, Solaris 9 N/AWin 2k Windows 2008 64-bit, Windows 2000, Windows 2003-32bit N/AWin 2k3-32 Windows 2000, Windows 2008 32-bit, Windows 2003-32bit N/AWin 2k3-64 Windows 2000, Windows 2008 64-bit, Windows 2008 32-bit, Windows 2003-64bit, Windows 2003-32bit N/AWin 2k8-32 Windows 2000, Windows 2003-32bit, Windows 2008 32-bit N/AWin 2k8-64 Windows 2000, Windows 2003-32bit, Windows 2008 32-bit, Windows 2003-64bit, Windows 2008 64-bit N/A5.1.2Solaris 10, Solaris 9, Windows 2003-64bit, Solaris 8, Windows 2003-32bit, Windows 2000N/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/ANot SupportedNot SupportedN/AN/AN/AN/AN/A Not Supported N/A37

CommandCentral Storage - SoftwareVendorVMwareApplication Software Version Supported OS Application Correlation Cluster Support Monitoring AlertingCommandCentralStorage ManagedHost on Guest OSESX Server - SMI-S(1.0.2)Virtual Center (VI SDK2.0)ESX Server (VI SDK2.0)5.0 5.1 5.1.2 5.23.0.0,3.0.1, 3.5, 3.5update 1, 2, 3 & 42.0 2.5 4.03.0.1 3.1 3.5 3.5.1 3.5.24.01. 2K = Windows 2000: Server, Advanced Server, Datacenter ServerWindows 2003-32bit, Windows 2008 32-bit, Linux Red Hat AS 3.0 32-bit, Linux Red Hat AS 4.0 64-bit, Windows 2003-64bit, Windows 2008 64-bit, Linux Red Hat AS 4.0 32-bit, VMware ESX * supported N/A Not SupportedVMware ESX *VMware ESX *VMware ESX *Not Supported N/A Not SupportedN/A N/A Not SupportedN/A N/A Not SupportedvSphere 4.0 VMware ESX * Not supported N/A2. 2K3-32 = Windows 2003-32bit: Standard, Datacenter, Enterprise, Web3. 2K3-x64= Windows 2003-64bit (Xeon/Opteron): Datacenter, Enterprise4. No support for IA64 (Itanium) Windows, either Management Server or Managed Host5. Linux = Red Hat Advanced Server/Enterprise Serveri) The Cluster Support column indicates CommandCentral Storage's ability to discover and correlate these applications in clustered environments. Unless otherwise indicated, an "X" means support for both VCS and MSCS.ii) The Application Correlation column indicates CommandCentral Storage's ability to correlate the application running on the host to the file system or volume that it is associated with.6. IE = Internet Explorer 6.x, FF = Firefox 1.07, 1.5, 2.0.0.x, 3.0 M = Mozilla 1.77. *AIX 5.3 will be supported with Storage Foundation 4.0 MP1.8. Cluster support is not available for Sybase 15.0 and 15.0.2Application Correlation is Supported for EMC PP 5.1 and 5.3.1.238

CommandCentral Storage -Software - Unified AgentVendorApplicationSoftwareVersionSupported OSApplicationCorrelationEMC PowerPath 5 Windows 2003-64 bit, Solaris 10, Linux Red Hat 5, N/A N/AClusterSupportIBMDB28.x Linux Red Hat 4, AIX 5.3, Solaris 10, AIX 6.19.x Linux Red Hat 4, AIX 5.3, Solaris 10N/AN/A2000 Windows 2003-64 bitMicrosoft2005 Windows 2003-32 bit2008 Windows 2008-64 bit, Windows 2003-32 bit2003 Windows 2003-32 bit2007 Windows 2008-64 bit, Windows 2008-32 bit11g R1 AIX 6.1Oracle DBOracle 10g R2 Solaris 10, HP-UX 11i v3 (PA-RISC & IA), Linux Red Hat 5,N/A SupportedSybaseSymantecSQL ServerExchangeRAC 10g R2 Solaris 10, HP-UX 11i v3 (PA-RISC & IA)ASE12.515Cluster Server 5 Solaris 10, HP-UX 11i v3 (PA-RISC & IA) Supported N/AStorageFoundation forWindowsStorageFoundation forUnix5.1 Windows 2003-64 bit, Windows 2008-64 bit, Supported5Solaris 10Solaris 10, HP-UX 11i v3 (PA-RISC & IA), Linux Red Hat 5, Linux Red Hat4, Suse Linux ES 10, AIX 5.3, AIX 6.1, Suse Linux ES 95.1 Solaris 9, Solaris X86N/AN/ASupportedN/ASupportedNotsupportedNotsupported39

CommandCentral Storage - Software - AgentlessVendorApplicationSoftwareVersionSupported OS5.3 Windows 2003 64-bitApplicationCorrelationClusterSupport5.2 Solaris 10, Windows 2008 32-bit, Windows 2008 64-bitEMC PowerPath5.1 Suse Linux ES 9, Suse Linux ES 10N/A N/AIBMMicrosoftRed HatSUSESunSymantec5.0Linux (AS/ES) 4.0 64-bit, Linux (AS/ES) 5.0 32-bit, Linux (AS/ES) 4.0 32-bit,Linux (AS/ES) 5.0 64-bit, Solaris 9, Solaris 10AIX LVM N/A AIX 5.2, AIX 5.3, AIX 6.1AIX JFS N/A AIX 5.2, AIX 5.3, AIX 6.1AIX JFS2 N/A AIX 5.2, AIX 5.3, AIX 6.1NTFSLDMEXT2, EXT3,EXT4, XFS,JFSLinux LVMEXT2, EXT3,EXT4, XFS,JFSLinux LVMN/AN/AN/AN/AN/AN/AWindows 2003 32-bit, Windows 2003 64-bit, Windows 2008 32-bit,Windows 2008 64-bitWindows 2003 32-bit, Windows 2003 64-bit, Windows 2008 32-bit,Windows 2008 64-bitLinux (AS/ES) 4.0 32-bit, Linux (AS/ES) 3.0, Linux (AS/ES) 5.0 64-bit, Linux(AS/ES) 5.0 32-bit, Linux (AS/ES) 4.0 64-bitLinux (AS/ES) 4.0 32-bit, Linux (AS/ES) 3.0, Linux (AS/ES) 5.0 64-bit, Linux(AS/ES) 5.0 32-bit, Linux (AS/ES) 4.0 64-bitSuse Linux ES 10 32-bit, Suse Linux ES 10 64-bit, Suse Linux 9, Suse Linux11 64-bitSuse Linux ES 10 32-bit, Suse Linux ES 10 64-bit, Suse Linux 9, Suse Linux11 64-bitUFS N/A Solaris 8, Solaris 9, Solaris 10LOFS N/A Solaris 10ZFS N/A Solaris 10 (Update 4 onwards)Zones N/A Solaris 10 (Update 3 onwards)Cluster ServerStorageFoundation ForWindows5.05.1AIX 5.2, AIX 5.3, AIX 6.1, Windows 2003 32-bit, Windows 2003 64-bit,Windows 2008 32-bit, Windows 2008 64-bit, Solaris 8, Solaris 9, Solaris 10,Linux Red Hat 4, Linux Red Hat 5, Linux Red Hat 5.5, Suse Linux ES 8,Suse Linux ES 9, Suse Linux ES 10AIX 5.2, AIX 5.3, AIX 6.1, Windows 2003 32-bit, Windows 2003 64-bit,Windows 2008 32-bit, Windows 2008 64-bit, Solaris 8, Solaris 9, Solaris 10,Linux Red Hat 4, Linux Red Hat 5, Linux Red Hat 5.5, Suse Linux ES 8,Suse Linux ES 9, Suse Linux ES 105.0 Windows 2003 32-bit, Windows 2003 64-bit5.1Windows 2003 32-bit, Windows 2003 64-bit, Windows 2008 32-bit,Windows 2008 64-bitN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/ASupported40

CommandCentral Storage - Software - AgentlessVendorApplicationSoftwareVersionSupported OS4.0 Solaris 8, Solaris9ApplicationCorrelationClusterSupport4.1 Solaris 8, Solaris9SymantecVMwareStorageFoundation forUnixAgentlessDiscovery ofGuest OS5.05.1N/AAIX 5.2, AIX 5.3, AIX 6.1, Solaris 8, Solaris 9, Solaris 10, Linux Red Hat 4,Linux Red Hat 5, Linux Red Hat 5.5, Suse Linux ES 8, Suse Linux ES 9,Suse Linux ES 10AIX 5.2, AIX 5.3, AIX 6.1, Solaris 8, Solaris 9, Solaris 10, Linux Red Hat 4,Linux Red Hat 5, Linux Red Hat 5.5, Suse Linux ES 8, Suse Linux ES 9,Suse Linux ES 10Windows 2003 32-bit, Windows 2003 64-bit, Windows 2008 32-bit,Windows 2008 64-bit, Red Hat Linux 4.0N/AN/ASupportedN/A41