Transitional Specification - OEC Business Interiors

Desk AssembliesDesk assemblies arewood and are available intwo styles: single-pedestaland double-pedestal.cSpecify, pages 336–339Back panels can be flush,or recessed 5" to providekneespace for visitors.3⁄4-height (19 1 ⁄2"H) andfull-height (27 5 ⁄8"H) backpanels are available.Worksurface can bewood or laminate.End panels support theworksurface.Leveling glides adjust toallow installation on unevenfloors.Actual DimensionsDepth 30" or 35"Width 60", 65", 70", or 75"Worksurface height 29 3 ⁄4"Worksurface thickness 1 1 ⁄2"Back panel height 19 1 ⁄2" or 27 5 ⁄8". Leveling glide range 1 1 ⁄2"Integral drawer pullsare flush and span the fullwidth of the drawer.Pedestal lock secures alldrawers in the pedestal witha single action. It is locatedin the right-hand corner of thebottom file drawer on eachpedestal. Products with locksship with a lock face ring andremovable plastic plug toaccommodate a lock cylinderinstalled on site. Lock cylindersmust be specifiedseparately.cSee Lock and KeyingOptions, Series 9000Systems FurnitureSpecification Guide.Pedestals are available3 ⁄4-height (19 1 ⁄2"H) to provide8 5 ⁄8" clear dimension betweenthe bottom of the pedestaland the floor, and full height(27 5 ⁄8"H).Radius edges are locatedfront and back..Product DetailsCenter drawer with penciltray is available for factoryinstallation on one- or twopedestaldesks.Factory-installedcenter drawer is notavailable on desk shells.Drawers are steel withwood fronts; wood drawersare available.Tip: Wood drawers andsteel drawers may not beintermixed on the same unit.Pedestal substitutionsare available from thefactory on desk, return, andcredenza assemblies withfull-height back panels only.Box drawers have amovable partition and areequipped with a hood inthe back of the drawer toprevent papers from slippingover. One convenience trayfor use in a box drawer isincluded in each deskwithout a center drawer..300 Transitional Specification Guide