Transitional Specification - OEC Business Interiors

CountertopsCountertops can be usedindividually or can link witheach other to form continuouscountertops along a runof frames.Tip: Countertops can’t bemounted off-module.Countertop has awood core.Curved ends of countertopare used at the end ofa run and extend slightlybeyond the footprint of theframes that support it.5 3 /4" 5 3 /4"5 3 /4" 6"6"5 3 /4"Actual DimensionsStraight Countertop Corner CountertopDepth 15" 15"Nominal width 24", 30", 36", 42", 48", 24" x 24", 30" x 30", 36" x 36",(corresponds to frame width) 54", 60", 66", 72", 78", 42" x 42", 48" x 48", 24" x 30",84", 90", and 96" 24" x 36", 24" x 42", 24" x 48",30" x 24", 30" x 36", 30" x 42",30" x 48", 42" x 24", 42" x 30",42" x 36", 42" x 48", 48" x 24",48" x 30", 48" x 36", and48" x 42"Countertop thickness 1 1 ⁄4" 1 1 ⁄4".Bracket height 6" 6"Straight ends on countertopscan be used tocontinue a run.Concealed fastenersensure a flush connectionbetween countertopcomponents.Corner countertops areL-shaped units that matchthe nominal dimensions offrames..Product DetailsTorus edge combines astepped detail with a radiusvinyl edge on laminateworksurfaces, or wood onwood worksurfaces.Round end of countertopoverhangs frame 5 3 ⁄4".Countertops are notintended to be load bearing.ConnectionsTie plate or alignmentbracket is used to connectadjacent countertops toensure alignment.Recommended standingheight for countertopsis achieved by attachingthem to 45"H frames. Allframe heights can acceptcountertops.Countertops can spanmore than one frame.Straight countertopsare non-handed..130 Transitional Specification Guide