Transitional Specification - OEC Business Interiors

Bubble Visitor, Jetty,and Bubble JettyWorksurfaces.Wiring & CablingClear space at the backof the worksurface allowscords and cables to passover at any point. Cablescallops provide space forplugs to pass over the backedge of the worksurface.Cable managementdevices are available tohelp manage conventionaland fiber-optic cablesbeneath the worksurface.cSee Montage SpecificationGuide.Surface MaterialsWorksurface• Laminate (standard)Tip: The color of the vinyltorus edge is determined bythe color you specify for thelaminate.• Wood veneer (option)• Customiz stain on veneer(option)Adjustable column• PaintShared cantilever• Black paint onlyAlignment plate• Black paint onlyEnd support bracket• Black paint onlyOff-module tie plate• Black paint onlyOff-module worksurfacebracket• PaintWood grain directionwill alter the color andappearance of any worksurface.Two surfaces withgrain directions that areat different angles to eachother may look differenteven when they areidentical.Tip: Make a sketch of thegrain direction for adjacentworksurfaces to ensurethey are suitable for yourinstallation..Application TopicsEnd support bracket isused to support the cornerof a bubble visitor, jetty, orbubble jetty worksurfacethat is adjacent to a framebut not linked to an adjacentworksurface. Brackets areused in on-module positionsonly.Tip: End support bracketsare ordered separately.Make sure you specify anadequate supply.Off-module worksurfacebracket is usedto support the corner ofa bubble visitor, jetty, orbubble jetty worksurfacethat is adjacent to a framebut not linked to an adjacentworksurface. Bracketsare used in off-module positionsonly and must be usedwith on-module supports toproperly support the worksurfacein an off-moduleposition..Off-module worksurfacebrackets must beused in combination withon-module supports toprovide forward worksurfacetip support.Shared cantilevers areused to support two worksurfacesat the same timeand are used in on-modulepositions only.Exception: They cannot beused to support corner orstraight worksurfaces sideby side..ShippingPalletizing streamlinesunloading and staging ofworksurfaces. Identicalworksurfaces ordered onthe same line item arepacked on pallets containing10–25 worksurfaces.Remaining worksurfacesare packed individually incartons. If palletizing is notdesired, order in quantitiesof nine or less per lineitem. For maximum unloadefficiency, utilize pallethandling equipment at jobsite whenever possible.Wood worksurfaces cannotbe palletized..MontageTransitional Specification Guide 127