Transitional Specification - OEC Business Interiors

Straight, Corner, Extended Corner, and Extended CornerCove Worksurfaces, continued.Surface MaterialsWorksurface• Laminate (standard)Tip: The color of the vinyltorus edge is determined bythe color you specify forthe laminate.• Wood veneer (option)• Customiz stain on veneer(option)End panel• PaintCantilever and flange• Black paint onlyEnd support bracket• Black paint onlyAlignment plate• Black paint onlyTie plate• Black paint onlyOff-module worksurfacebracket• PaintEnd-of-run cantilever• Paint.Wood grain directionwill alter the color andappearance of any worksurface.Two surfaces withgrain directions that areat different angles to eachother may look differenteven when they areidentical.Tip: Make a sketch of thegrain direction for adjacentworksurfaces to ensurethey are suitable for yourinstallation..Application TopicsWorksurfaces with morethan 60" of unsupportedspan require additional support.Use cantilevers.Off-module worksurfacebrackets must beused in combination withon-module supports to provideforward worksurface tipsupport..ShippingPalletizing streamlinesunloading and staging ofworksurfaces. Identicalworksurfaces ordered onthe same line item arepacked on pallets containing10–25 worksurfaces.Remaining worksurfacesare packed individually incartons. If palletizing is notdesired, order in quantitiesof nine or less per lineitem. For maximum unloadefficiency, utilize pallethandling equipment at jobsite whenever possible.Wood worksurfaces cannotbe palletized...124 Transitional Specification Guide