Transitional Specification - OEC Business Interiors

Standard Tiles.36x20scale 50Patterned tiles are availablein four different patterndensities. Numbers are usedto designate the number ofholes in each 2"W x 1 3 ⁄8"Harea. Patterned tiles are20"H and are galvanizedsteel or painted steel.Galvanized metal isa random, patterned, anddecorative material. Expectthis material to vary in color,color consistency, andpattern density.Diameter of perforations is0.125" on P4, P9, and P20tiles. Diameter of perforationson P85 tile is 0.09".Cross-sectionthroughindented tileIndented tiles are availablein two patterns. Indentsare 0.125" diameter. Indentedtiles are 20"H and are galvanizedsteel or paint.Tip: Power and data cannotbe routed behind perforatedtiles.ConnectionsDetails slatwall worktoolsslide into grooves inthe slatwall tile..Overhead storagecomponents cannot beattached to frames withglass tiles.Glass tiles cannot beused with worksurfacesbecause glass preventsthe use of cantilevers.20"H tackableacoustical tile or20"H non-tackable tile13"Hslatwall tile20"H slatwall tile cannotbe installed in a frame witha desk-height cavity becauseof a reinforcing flange on theback of tile. In applicationswhere you want to havedesk-height power on onlyone side of the frame, use20"H tackable acousticalor 20"H non-tackable tileon opposite side..Consolidation pointlocking door tile isremovable and allows fullaccess to data/voice networkconnection points.Available at widths of 30",36", 42", and 48".Lock is standard keyedrandom. Consecutive andspecific keying options areavailable. Master-keyedlocks are also available.Products with locks ship witha lock face ring andremovable plastic plug toaccommodate a lockcylinder installed on site.Lock cylinders must bespecified separately.cLock and Keying Options,see Montage SpecificationGuide.Tip: With random keying thekey to a consolidation pointcan accidentally be thesame as nearby pedestalsor other locked components.To ensure that consolidationpoint units have unique keynumbers that are availableonly to the IS manager orfacility manager, you maywant to choose the keyedspecific option..Wiring & CablingBase fiber-in allows fiberopticcables to enter thebase on frames at an angleso that the fiber-optic cableisn’t forced to form a tightradius which could damagethe cable. This cable-in alsoaccommodates conventionalcables.Wedge-shaped connectorcan be oriented in eitherdirection.Base fiber-in is positionedabove base cavity of frameand doesn’t obstruct anyreceptacle locations.Inside diameter of conduitis 3 ⁄4". In situationswhere capacity is critical,you should conduct a testusing the specific cabletypes your installationrequires.Surface MaterialsTackableacoustical tile• Vertical surface fabricHigh-performanceacoustical tile• Vertical surface fabricNon-tackable tile• Paint• Vertical surface fabric.Non-tackable tile withcutout for base fiber-in• Paint• Vertical surface fabricGalvanized tile• Galvanized metal(standard)Laminate tile• Laminate (standard)• Customer’s own laminate(optional)Wood tile• Wood• Customiz stainMarkerboard tile• White markerboardlaminate onlySlatwall tile• PaintGlass tile• Clear glass insert(standard)• Etched glass insert(optional)Interior trim ofglass tile• 6000 Black plastic• 6659 Light Grey plasticConsolidation pointlocking door tile• Paint• Vertical surface fabricLock on consolidationpoint locking door tile• Polished Chrome onlyConduit for basefiber-in• Black plastic onlyWedge-shapedconnector for basefiber-in• Black plastic onlyMounting bracket forbase fiber-in• Black paint onlyApplication TopicsAcoustic GuidelinescSee Montage SpecificationGuide..MontageTransitional Specification Guide 121