Transitional Specification - OEC Business Interiors

Powerway Locations with Special RequirementsPPowerway Locations withSpecial Requirements.Chicago code requireshardwiring of all electricalcomponents.New York City coderequires that all electricalcomponents befield installed.San Francisco codeis satisfied with thesame approach asNew York City.cSee description above.Los Angeles codeprohibits concealedcords. All power must beenclosed in conduits.Order frames withutility cavities.Order Chicago junctionboxes. They can beinstalled at any receptaclelocation in the base cavity ordesk-height cavity of aMontage frame.Openings on oppositesides of the junction boxallow receptacles to beinstalled back to back orindividuallyOrder canopy lightsor shelf lights withcircuit-breaker cords.Order New York Cityversion of the power-into allow hardwiredconnection to powerkit.Order frames withoutdesk-height cavities andorder desk-heightcavities and powerkitsfor field installation.Order Los Angelesversions of standardMontage components.They meet Los Angelesrequirements.Tip: Montage standardcomponents do notcurrently meet theCalifornia Office ofStatewide HealthPlanning andDevelopment (OSHPD)standards mandatedfor use in healthcarefacilities.Electrician will supplyall standard componentsincluding connection tobuilding power, conduit,wires, fittings, andreceptacles (Leviton 5325).Tip: Frames that are 24"W,30"W, or 36"Waccommodate onereceptacle on each side.42"W and 48"W framesaccommodate tworeceptacles on each side.Electrician will supplyconnection to buildingpower. Remainingconnections betweenpowerkits can becompleted in the field.Los Angeles codeaccepts the standard basepower-in component, basedon its U.L. listing..MontageTransitional Specification Guide 117