Transitional Specification - OEC Business Interiors

Powerway Receptaclesand Covers.Product DetailsReceptacles are orderedseparately and installed inthe field.Covers are orderedseparately and attached toframes in the field.Circuit connections arepredetermined by the type ofreceptacle.Receptacles areavailable in six versions toen-able you to accessdifferent combinations ofcircuits. They include:Line 1 and 2Line 3 and 4 (isolated)Line 1 and 1Line 2 and 2Line 3 and 3 (isolated)Line 4 and 4 (isolated)Label on each receptacleface indicates whichcircuit each outlet isconnected to, so the usercan control which devicesare on specific circuits.24"W base cover withreceptacle opening isavailable for use in Chicagoor other locations whereelectrical power installationsare hardwired.Tip: In applications where a24"W powerway is required,contact your Steelcase areaoffice to discuss specialapplications..Outlet filler plate comesstandard with the basecover to fully close unusedreceptacle locations.Desk-height cavitywithout powerway canbe used for cable routing,and receptacle openings canaccommodate voice/datareceptacles.Voice/data receptaclesare available toaccommodate a wide rangeof modular connections.Receptacles are supplied bythe installer..ConnectionsBase covers attach tothe frame with a concealedattachment and areremovable.Desk-height cavitycovers snap onto deskheightutility cavity with aconcealed attachment..Wiring & CablingAny circuit can beaccessed at anyreceptacle location by usingthe appropriate receptacle..Surface MaterialsDesk-height cavitycover• PaintBase cover• PaintOutlet filler plate• PaintReceptacle• Black plastic only.MontageTransitional Specification Guide 113