Transitional Specification - OEC Business Interiors

More documents

Recommendations

Info

Powerway Receptacles and CoversPPowerway base anddesk-height covers canonly be used with thepowerway system.cSpecifying, pages 149–151Voice/data receptacleopenings cannotaccommodate powerreceptacles.Power base coverattaches to the frame andaccommodates receptacles.Plain base cover can becombined with power basecovers on opposite sides ofa frame.Actual DimensionsDesk-height cavity coverWidth 24", 30", 36", 42", or 48"Height 7"Base coverWidth 24", 30", 36", 42", or 48"Height 3 7 ⁄16"Receptacle openingWidth of opening 2 5 ⁄8". Height of opening 1 3 ⁄8"Desk-HeightCavity Covers7 /8" 9 5 /8"24"W7 /8" 12 5 /8"7 /8"12 5 /8"7 /8" 12 5 /8"7 /8" 12 5 /8"30"W36"W42"W48"W13 9 /16"13 9 /16"13 9 /16"Desk-height cavitycover provides openingsfor electrical outlets andnetwork receptacles.Power receptacleopenings cannotaccommodate voice/datareceptacles unless there isno powerway installed.Cable-managementtray is concealed below thelevel of the worksurface.Base Covers10 1 /2"24"W13 1 /2"13 1 /2"13 1 /2"13 1 /2"30"W36"W42"W48"W13 9 /16"13 9 /16"13 9 /16".112 Transitional Specification Guide
Powerway Receptaclesand Covers.Product DetailsReceptacles are orderedseparately and installed inthe field.Covers are orderedseparately and attached toframes in the field.Circuit connections arepredetermined by the type ofreceptacle.Receptacles areavailable in six versions toen-able you to accessdifferent combinations ofcircuits. They include:Line 1 and 2Line 3 and 4 (isolated)Line 1 and 1Line 2 and 2Line 3 and 3 (isolated)Line 4 and 4 (isolated)Label on each receptacleface indicates whichcircuit each outlet isconnected to, so the usercan control which devicesare on specific circuits.24"W base cover withreceptacle opening isavailable for use in Chicagoor other locations whereelectrical power installationsare hardwired.Tip: In applications where a24"W powerway is required,contact your Steelcase areaoffice to discuss specialapplications..Outlet filler plate comesstandard with the basecover to fully close unusedreceptacle locations.Desk-height cavitywithout powerway canbe used for cable routing,and receptacle openings canaccommodate voice/datareceptacles.Voice/data receptaclesare available toaccommodate a wide rangeof modular connections.Receptacles are supplied bythe installer..ConnectionsBase covers attach tothe frame with a concealedattachment and areremovable.Desk-height cavitycovers snap onto deskheightutility cavity with aconcealed attachment..Wiring & CablingAny circuit can beaccessed at anyreceptacle location by usingthe appropriate receptacle..Surface MaterialsDesk-height cavitycover• PaintBase cover• PaintOutlet filler plate• PaintReceptacle• Black plastic only.MontageTransitional Specification Guide 113
Page 1 and 2:
TransitionalProducts and Surface Ma
Page 3 and 4:
Activity ProductsActivity ProductsT
Page 5 and 6:
Tables G90°, 180°, and Rectangula
Page 7 and 8:
Posts GPosts360° Powered PostStand
Page 9 and 10:
Auxiliary SurfacesActivity Products
Page 11 and 12:
Screens and Mobile ScreensSpecifica
Page 13 and 14:
AnswerAnswer worksurfaces (with the
Page 15 and 16:
Tackable Acoustical Fabric-Covered
Page 17 and 18:
78"H Full Skin Performance Tackable
Page 19 and 20:
Solar Bronze Window InsertOption on
Page 21 and 22:
Scoop WorksurfaceScoop WorksurfaceW
Page 23 and 24:
Wave WorksurfacesAnswerFor Canadian
Page 25 and 26:
Angled Peninsula Worksurfaces for U
Page 27 and 28:
Curved Linking Worksurfaces for Use
Page 29 and 30:
Worksurface SupportsWorksurface Sup
Page 31 and 32:
Worksurface Wiring and CablingWorks
Page 33 and 34:
Mobile Pedestal CapFor Use with 22"
Page 35 and 36:
Answer Fillerfor Use with Answer Sy
Page 37 and 38:
Pencil TrayPencil TrayStandard Incl
Page 39 and 40:
AvenirPanelsNon-Tackable Panels 40P
Page 41 and 42:
Non-Tackable PanelscOptions, contin
Page 43 and 44:
Non-Tackable PanelsAvenirTransition
Page 45 and 46:
Panel Wiring and CablingConsolidati
Page 47 and 48:
Rectangular Worksurfaces1 1 /8"-Thi
Page 49 and 50:
Panel-Supported Radius-End Tables1
Page 51 and 52:
Worksurface Supports and BracketsWo
Page 53 and 54:
Worksurface Wiring and CablingWorks
Page 55 and 56:
Freestanding Pedestalswith 100 Seri
Page 57 and 58:
Worksurface-SupportedPedestalsSpeci
Page 59 and 60:
Mobile Pedestalwith 100 Series Pull
Page 61 and 62: Storage AccessoriesStorage Accessor
Page 63 and 64: Storage AccessoriesStationery Trays
Page 65 and 66: PaperfloBacksStandard Includes• B
Page 67 and 68: BookendsAvenirTransitional Specific
Page 69 and 70: Rectangular WorksurfacesSpecificati
Page 71 and 72: Straight Transaction WorksurfacesSt
Page 73 and 74: Freestanding Pedestalswith 1 1 ⁄2
Page 75 and 76: Mobile Pedestalswith Square-Edge To
Page 77 and 78: Mobile PedestalsSpecification Infor
Page 79 and 80: ContextCore UnitsFanned Visitor Cor
Page 81 and 82: Fanned Visitor Core UnitsSpecificat
Page 83 and 84: Storage InsertsStorage InsertsCompr
Page 85 and 86: Elective ElementsPanelsShortened To
Page 87 and 88: In-Line Change-of-Height Trim (Dele
Page 89 and 90: Worksurface Wiring and Cabling Acce
Page 91 and 92: Laminate Service Modules with Organ
Page 93 and 94: Metal Storage AccessoriesMetal Stor
Page 95 and 96: EllipsePedestalsDesk-Mounted Pedest
Page 97 and 98: Desk-Mounted PedestalEllipseFor Can
Page 99 and 100: Freestanding PedestalsSpecification
Page 101 and 102: Mobile PedestalsSpecification Infor
Page 103 and 104: Lateral FilesSpecification Informat
Page 105 and 106: Vertical CabinetsSpecification Info
Page 107 and 108: MontageProduct DetailsFloor-to-Ceil
Page 109 and 110: Acoustic GuidelinesAcoustic Guideli
Page 111: Powerway System.Cavity contains cli
Page 115 and 116: Powerway Wiring andCabling with Fra
Page 117 and 118: Powerway Locations with Special Req
Page 119 and 120: Standard Frames.Special top cap lin
Page 121 and 122: Standard Tiles.36x20scale 50Pattern
Page 123 and 124: Straight, Corner,Extended Corner, a
Page 125 and 126: Straight, Corner,Extended Corner, a
Page 127 and 128: Bubble Visitor, Jetty,and Bubble Je
Page 129 and 130: Spanner and FannedSpanner Worksurfa
Page 131 and 132: Countertops.Steel top cap onframe i
Page 133 and 134: Worksurfaces and SupportsUsed in Of
Page 135 and 136: Adjustable-HeightWorksurfaces.Exten
Page 137 and 138: Adjustable-HeightWorksurfaces.High-
Page 139 and 140: Standard 65"H Three-High FramesStan
Page 141 and 142: Standard 20"HSingle Stack-on Frames
Page 143 and 144: Acoustic FillersAcoustic FillersWha
Page 145 and 146: DoorsDoorsTip: Door lever sets must
Page 147 and 148: Powerway System FrameWiring and Cab
Page 153 and 154: Standard Tackable Acoustical TilesS
Page 155 and 156: StandardHigh-PerformanceAcoustical
Page 157 and 158: Standard Non-Tackable TilesSpecific
Page 159 and 160: Standard Laminate TilesStandard Lam
Page 161 and 162: Standard Marker Board TilesStandard
Page 163 and 164:
Standard Glass Tile PackagesStandar
Page 165 and 166:
Standard Tile Removal ToolStandard
Page 167 and 168:
Straight WorksurfacescSpecification
Page 169 and 170:
Corner WorksurfacesSpecification In
Page 171 and 172:
Extended CornerWorksurfacesSpecific
Page 173 and 174:
Extended CornerWorksurfacesSpecific
Page 175 and 176:
Bubble Visitor WorksurfacesBubble V
Page 177 and 178:
Bubble Jetty WorksurfacesBubble Jet
Page 179 and 180:
Straight CountertopsStraight Counte
Page 181 and 182:
Corner CountertopsSpecification Inf
Page 183 and 184:
Corner CountertopsSpecification Inf
Page 185 and 186:
Adjustable-HeightWorksurfacesSpecif
Page 187 and 188:
Adjustable-Height Worksurfaceswith
Page 189 and 190:
SeatingHigh-Performance SeatingRapp
Page 191 and 192:
Rapport 460 SeriesAdjustment Featur
Page 193 and 194:
DimensionsDBack DWidth DWidth DWidt
Page 195 and 196:
Rapport 460 SeriesWork ChairscOptio
Page 197 and 198:
Sensor 458 Series Size IIIHigh-Back
Page 199 and 200:
Sensor 458 Series Size IIAdjustable
Page 201 and 202:
Sensor 458 Series Size IIAdjustable
Page 203 and 204:
Sensor 458 Series Size IIHigh-Back
Page 205 and 206:
Sensor 458 Series Size IIMid-Back W
Page 207 and 208:
Sensor 458 Series Size IMid-Back Wo
Page 209 and 210:
Sensor 458 Series Size IIMid-Back S
Page 211 and 212:
Sensor 458 Series Size IMid-Back Hi
Page 213 and 214:
Sensor 458 Series Size IMid-Back Lo
Page 215 and 216:
Rally 457 SeriesWork ChairsSpecific
Page 217 and 218:
Rally 457 SeriesMid-Back Guest Chai
Page 219 and 220:
Protegé 433 SeriesWork ChairsSpeci
Page 221 and 222:
Protegé 433 Series Sled-Base Guest
Page 223 and 224:
Player 475 SeriesLeg-BaseMultipurpo
Page 225 and 226:
Player 475 SeriesLeg-BaseMultipurpo
Page 227 and 228:
Player 475 SeriesSled-BaseMultipurp
Page 229 and 230:
Player 475 SeriesSled-BaseMultipurp
Page 231 and 232:
Snodgrass 474 SeriesMultipurpose/Gu
Page 233 and 234:
Trilogy 422 Series Sled-Base Multip
Page 235 and 236:
Max-Stacker 472 Series Stackable Se
Page 237 and 238:
Series 9000Tip: Refer to the Series
Page 239 and 240:
Series 9000 Conventional,Enhanced,
Page 241 and 242:
Conventional Panel andPanel Door Di
Page 243 and 244:
Conventional TackableAcoustical Pan
Page 245 and 246:
Conventional Panel Doors.Connection
Page 247 and 248:
Conventional Accent Panels.Connecti
Page 249 and 250:
Receptacle LocationsReceptacle Loca
Page 251 and 252:
Cable Capacities ofConventional Pan
Page 253 and 254:
Conventional TackableAcoustical Pan
Page 255 and 256:
Conventional Panel DoorsConventiona
Page 257 and 258:
Conventional Horizontal Accent Pane
Page 259 and 260:
Conventional Horizontal Accent Pane
Page 261 and 262:
Conventional Panel BracketsConventi
Page 263 and 264:
Conventional Panel Wiring and Cabli
Page 265 and 266:
Conventional Vertical Wire ManagerC
Page 267 and 268:
Enhanced High-PerformanceTackable A
Page 269 and 270:
Enhanced CurvedNon-Tackable PanelsS
Page 271 and 272:
Enhanced CurvedTransparent PanelsSp
Page 273 and 274:
Panel Wiring and CablingPanel Wirin
Page 275 and 276:
Curved Worksurface PackagesConsolid
Page 277 and 278:
Radius-End Worksurfaces (Deleted)Pa
Page 279 and 280:
Radius-End Tables (Deleted)Radius-E
Page 281 and 282:
Curved Transaction Worksurfaces (De
Page 283 and 284:
Mobile Pedestal CapsField-Installed
Page 285 and 286:
Storage AccessoriesReference ShelfS
Page 287 and 288:
Pedestal Conversion KitsPedestal Co
Page 289 and 290:
Series 9000Wood SelectionsLaminate
Page 291 and 292:
Wood Veneer Service Modules with Or
Page 293 and 294:
Series 9000Valencia WoodCollection
Page 295 and 296:
Valencia Wood CollectionWorksurface
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
Desk Assemblies.File drawers open t
Page 303 and 304:
Return Assemblies.ConnectionsReturn
Page 305 and 306:
Credenza Assemblies.Double-door ped
Page 307 and 308:
Shells.ConnectionsService modules c
Page 309 and 310:
Corner WorksurfacesCorner Worksurfa
Page 311 and 312:
Bridges.ConnectionsSpace between th
Page 313 and 314:
Radius-End Worksurfacesand Radius-E
Page 315 and 316:
Panel-Supported Transaction Worksur
Page 317 and 318:
GrommetsGrommets.Actual DimensionsD
Page 319 and 320:
Mobile PedestalsSeries 9000Transiti
Page 321 and 322:
Lateral Files.Wiring & CablingGromm
Page 323 and 324:
BookcasesBookcasesBookcases match t
Page 325:
Pedestals, Double-DoorCabinets, and
Page 328 and 329:
Storage Bins and ShelvesStorage bin
Page 330 and 331:
Storage Capacities.Mobile Pedestals
Page 332 and 333:
Storage Capacities, continuedWardro
Page 334 and 335:
Storage Capacities, continuedServic
Page 336 and 337:
Desk Assemblies Gwith 3 ⁄4-Height
Page 338 and 339:
Desk Assemblies Gwith Full-Height B
Page 340 and 341:
Return Assemblies Gwith Full-Height
Page 342 and 343:
Credenza Assemblies Gwith 3 ⁄4-He
Page 344 and 345:
Credenza Assemblies Gwith Full-Heig
Page 346 and 347:
Credenza Assemblies, One Lateral Fi
Page 348 and 349:
Desk Shells Gwith Full-Height Back
Page 350 and 351:
Credenza Shells Gwith 3 ⁄4-Height
Page 352 and 353:
Corner Worksurfaces GWStandard Incl
Page 354 and 355:
Radius-End Tables GWStandard Includ
Page 356 and 357:
VDT/Printer Tables GStandard Includ
Page 358 and 359:
Worksurface Accessories GWood Cente
Page 360 and 361:
Lateral Files GTip: Specify lock cy
Page 362 and 363:
Wardrobes and Storage Cabinets GSta
Page 364 and 365:
Bookcases GStandard Includes• Boo
Page 366 and 367:
Full-Height Pedestals GTip: 25"D pe
Page 368 and 369:
Service Module Tackboards GStandard
Page 370 and 371:
Storage Bins GTip: Specify lock cyl
Page 372 and 373:
8600 Series Round and Square Tables
Page 374 and 375:
8600 Series Rectangular and Oval Ta
Page 376 and 377:
8600 Series Boat-Shape Tables GStan
Page 378 and 379:
378 Transitional Specification Guid
Page 380 and 381:
Worksurface Wiring and CablingPull-
Page 382 and 383:
Worksurface Wiring and Cabling, con
Page 384 and 385:
Page 386 and 387:
Paper Storage ProductsPaperflo Pack
Page 388 and 389:
Paper Storage Products, continuedSu
Page 390 and 391:
Paper Storage Products, continuedLe
Page 392 and 393:
FirstFile 100 Series Lateral FilesW
Page 394 and 395:
Page 396 and 397:
Page 398 and 399:
Buildup Tips and Examples.Specifyin
Page 400 and 401:
Cabinets for 800 and 900 Series Bui
Page 402 and 403:
900 Series Combination Cabinets GcS
Page 404 and 405:
Roll-Out Worksurfaces (Deleted)15 1
Page 406 and 407:
800 Series Vertical Files (Deleted)
Page 408 and 409:
800 Series CabinetsTip: Drawers may
Page 410 and 411:
900 Series Vertical Files (Deleted)
Page 412 and 413:
900 Series CabinetsTip: Drawers may
Page 414 and 415:
1700 Series Vertical Files (Deleted
Page 416 and 417:
800 Series Personal Cabinets GTip:
Page 418 and 419:
900 Series Personal Cabinets GTip:
Page 420 and 421:
970 Series Storage, Wardrobe, and C
Page 422 and 423:
730 Series Bookcases GStandard Incl
Page 424 and 425:
Bullnose Edge Tops Gfor Use with 73
Page 426 and 427:
Page 428 and 429:
Small Perforation Option GOn Pedest
Page 430 and 431:
Mobile Pedestal and Mobile File Uni
Page 432 and 433:
Storage TowersLast order entry is A
Page 434 and 435:
Storage Tower AccessoriesFiling Rai
Page 436 and 437:
JacketPolar Fleece Back Cover Optio
Page 438 and 439:
Surprise! Manager Chair GStandard I
Page 440 and 441:
Sweeper GArmless Task Chair with Pl
Page 442 and 443:
Sweeper, continuedLounge Chair GSta
Page 444 and 445:
Sweeper, continuedLove SeatStandard
Page 446 and 447:
Sweeper, continuedArm Kit and Table
Page 448 and 449:
Smoke Mobile Bow Tie Table Desk GTi
Page 450 and 451:
TablesStandard Includes• Worksurf
Page 452 and 453:
AccessoriesShelf Light GStandard In
Page 454 and 455:
Page 456 and 457:
WaldenCredenzaswith 3 /4-Height Ped
Page 458 and 459:
Walden458 Transitional Specificatio
Page 460 and 461:
PaladinSuites with Double-Pedestal
Page 462 and 463:
PaladinSuites with Single-Pedestal
Page 464 and 465:
PaladinSuites with Bullet-Shape Tab
Page 466 and 467:
PaladinSuites with Single-Pedestal
Page 468 and 469:
PaladinDouble-Pedestal Desks GTip:
Page 470 and 471:
PaladinSingle-Pedestal Desks GLeft-
Page 472 and 473:
PaladinSingle-Pedestal Desks GRight
Page 474 and 475:
PaladinDesk-Height Returns GRight-H
Page 476 and 477:
PaladinBridges GTip: Bridge must be
Page 478 and 479:
PaladinCredenzas with One Left-Hand
Page 480 and 481:
PaladinCredenzas with Two Pedestals
Page 482 and 483:
PaladinFull-Storage Credenzas GTip:
Page 484 and 485:
PaladinService Modules and Tackboar
Page 486 and 487:
Paladin42"H Lateral Files GStandard
Page 488 and 489:
PaladinVDT/Printer Tables GStandard
Page 490 and 491:
PaladinAccessoriesPencil TrayStanda
Page 492 and 493:
PaladinAccessories, continuedPullou
Page 494 and 495:
GarlandDesksTip: Specify lock cylin
Page 496 and 497:
GarlandDesk-Height ReturnsTip: Righ
Page 498 and 499:
GarlandBullet-Shape TableStandard I
Page 500 and 501:
GarlandCredenzasTip: Specify lock c
Page 502 and 503:
GarlandService Modules and Tackboar
Page 504 and 505:
GarlandLateral FilesStandard Includ
Page 506 and 507:
GarlandBookcasesStandard Includes
Page 508 and 509:
Garland508 Transitional Specificati
Page 510 and 511:
MonarchSuites with Double-Pedestal
Page 512 and 513:
MonarchSuites with Single-Pedestal
Page 514 and 515:
MonarchTable DesksStandard Includes
Page 516 and 517:
MonarchDouble-Pedestal DesksStandar
Page 518 and 519:
MonarchSingle-Pedestal DesksStandar
Page 520 and 521:
MonarchReturnsTip: Specify a right-
Page 522 and 523:
MonarchBridgeStandard Includes• B
Page 524 and 525:
MonarchCredenza AssembliesStandard
Page 526 and 527:
MonarchWorksurfaces for Modular Cre
Page 528 and 529:
MonarchBases for Modular CredenzasS
Page 530 and 531:
MonarchOverhead StorageStandard Inc
Page 532 and 533:
MonarchOpen Modular BookcasesFStand
Page 534 and 535:
MonarchCornices for Modular Bookcas
Page 536 and 537:
MonarchBases for Modular BookcasesS
Page 538 and 539:
MonarchOccasional TablesStandard In
Page 540 and 541:
MonarchConsole TableStandard Includ
Page 542 and 543:
MonarchConference Table BasesStanda
Page 544 and 545:
Page 546 and 547:
CaneCreek Table CollectionRound Lam
Page 548 and 549:
CaneCreek Table CollectionRectangul
Page 550 and 551:
CaneCreek Table CollectionRacetrack
Page 552 and 553:
Page 554 and 555:
Page 556 and 557:
Page 558 and 559:
Page 560 and 561:
CaneCreek Table CollectionCabriole
Page 562 and 563:
CaneCreek Table CollectionCorner Ta
Page 564 and 565:
Page 566 and 567:
Broadmoor Table CollectionConferenc
Page 568 and 569:
Broadmoor Table CollectionConferenc
Page 570 and 571:
Broadmoor Table CollectionRound Woo
Page 572 and 573:
Broadmoor Table CollectionSquare Wo
Page 574 and 575:
Broadmoor Table CollectionRectangul
Page 576 and 577:
Page 578 and 579:
Page 580 and 581:
Broadmoor Table CollectionBoat-Shap
Page 582 and 583:
Page 584 and 585:
Page 586 and 587:
Broadmoor Table CollectionRacetrack
Page 588 and 589:
Page 590 and 591:
Page 592 and 593:
Broadmoor Table CollectionColumn Le
Page 594 and 595:
Broadmoor Table CollectionDisk Base
Page 596 and 597:
Broadmoor Table CollectionSplit-Pan
Page 598 and 599:
Broadmoor Table CollectionV-Bases G
Page 600 and 601:
Broadmoor Table CollectionEnd Table
Page 602 and 603:
Broadmoor Table CollectionRound Cor
Page 604 and 605:
Broadmoor Table CollectionSquare Co
Page 606 and 607:
Broadmoor Table CollectionColumn Le
Page 608 and 609:
Broadmoor Table CollectionSkirted L
Page 610 and 611:
Broadmoor Table CollectionTop Subst
Page 612 and 613:
Page 614 and 615:
Page 616 and 617:
Broadmoor Table CollectionWood Pane
Page 618 and 619:
Broadmoor Table Collection618 Trans
Page 620 and 621:
Paradigm Desk Chairs G190 Series Hi
Page 622 and 623:
Paradigm Desk Chairs G180 Series Lo
Page 624 and 625:
Paradigm Desk Chairs G190 and 180 S
Page 626 and 627:
Bank of England Guest Chair GStanda
Page 628 and 629:
Parliament Guest Chair GStandard In
Page 630 and 631:
Page 632 and 633:
Surface MaterialsPaintPrice Group 1
Page 634 and 635:
Page 636 and 637:
Style Number IndexStyleNumber Page
Page 638 and 639:
Style Number Index, continuedStyleN
Page 640 and 641:
Page 642 and 643:
Page 644 and 645:
Page 646 and 647:
Page 648 and 649:
Page 650 and 651:
Page 652 and 653:
Page 654 and 655:
Page 656 and 657:
Page 658:
Trademark List.® The following reg
show all

Transitional Specification - OEC Business Interiors

Create successful ePaper yourself

Delete template?

Save as template?