Transitional Specification - OEC Business Interiors

Powerway System.Cavity contains clips thatallow powerway to snapinto position. Pin is used tosecure powerway andmaintain alignment.Base power-in connectsto the powerway in place ofa frame-to-frame connectorcable. It occupies the righthandreceptacle location andincludes a hinged plate thatallows it to rotate 180° tofeed into the powerway fromeither direction.Top power-in cableconnects to the powerway inplace of the frame-to-frameconnector cable.It does not occupy areceptacle location.Straight connection isformed when a frame-toframeconnector cable linkstwo powerways..L-connection is formedwhen a frame-to-frameconnector turns to the leftor right.T-connection is formedby three powerways—twolinked by an L-connection.X-connection is formedby four powerways linked bythree L-connections.Powerway indesk-heightcavity.Powerway inbase cavityWiring & CablingAll Montage electricalcomponents are listedby Underwriters Laboratory(UL) and certified by theCanadian StandardsAssociation (CSA).Local electrical codesvary. Consult a qualifiedelectrical contractor orengineer for the properinstallation of all electricalequipment.Chicago, New YorkCity, and Los Angeleshave special requirementscPage 117.Power transfercable must beused at a junction.Frame-toframepowerconnectorcableSurface MaterialsPowerways areconcealed when they areproperly installed.Outlet filler plate• PaintPower and cable poleTop power-in cable canconnect to either a desk-heightpowerway or a powerway in thebase of the frame.Pass-throughpowerconnectorcable.Application Topics24"W powerway shipswith both an 18"W and a24"W whip. Use appropriatewhip depending on adjacentpanel.Powerway CircuitSpecificationscPage 116Powerway Locationswith SpecialRequirementscPage 117Cable can connect toeither a desk-heightpowerway or a powerwayin the base of a frame.Frame-toframepowerconnectorcable.MontageTransitional Specification Guide 111