AIR CONDITIONER - Heronhill Air Conditioning Ltd

7-10. Self-Cleaning functionFILE NO. SVM-05020Self-Cleaning function is designed to reduce humidity that causes mold to form inside the air conditioning unit.This advanced, efficient system reduces moisture in the coil. When air conditioner is turned off, the internal fanactivates and dries the moisture in the coil for 20 minutes, then it turns off automatically.Operation display ON OFF OFFFCU fanONrpm is depend on presetting.ONrpm is SL speed.OFFFCU louver OPEN CLOSE CLOSETimer displayON or OFFdepend on presetting of timer function.ONON or OFFdepend on presetting of timer function.CompressorON or OFFdepend on presetting per room temperature.OFFOFFCDU fanON or OFFdepend on presetting per room temperature.Cool mode or dry modeoperation more than 10 mins.OFFOFF8 8-Self-Cleaning modeOperation timeoperate 20 mins.Turn off by remote controller ortimer-off function.Automatically turn-off.• The Self-Cleaning function is set as default at ex-factory.• Self-Cleaning operation can stop manually by press [ ] button of the remote control two more time.7-10-1. How to cancel Self-Cleaning functionTo cancel the Self-Cleaning function, proceed asfollows:• Press [TEMPORARY] button one time or use remotecontrol to turn on air conditioner. The OPERATIONdisplay will show in orange color (When AUTO-RESTART is ON) or green color (When AUTO-RESTART is OFF).• Hold down the [TEMPORARY] button for more than20 seconds. (The air conditioner will stop suddenlywhen the [TEMPORARY] button is pressed but keepholding it continue. Then will beep 3 times in the first3 seconds but it is not related to Self-Cleaningfunction)• After holding about 20 seconds, the air conditionerwill beep 5 times without any blinking of display.• The Self-Cleaning Operation had been cancelled.Remarks• Per setting of Self-Cleaning function above, AUTO-RESTART function had been cancelled. To setAUTO-RESTART again, please follow item 7-8-1.7-10-2. How to set Self-Cleaning function.To set the Self-Cleaning function, proceed as follows.• Press [TEMPORARY] button one time or use remotecontrol to turn on air conditioner. The OPERATIONdisplay will show in orange color (When AUTO-RESET is ON) or green color (When AUTO-RESTART is OFF).• Hold down the [TEMPORARY] button for more than20 seconds. (The air conditioner will stop suddenlywhen the [TEMPORARY] button is pressed but keepholding it continue. Then will beep 3 times is the first3 seconds but it is not related to Self-Cleaningfunction)• After holding about 20 seconds, the air conditionerwill beep 5 times and OPERATION display blinks5 times.• The Self-Cleaning function had been set.Remarks• Per setting of Self-Cleaning function above, AUTO-RESTART function had been cancelled. To setAUTO-RESTART again, please follow item 7-8-1.– 35 –